Trade Cases
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/media/k2/items/src/d3a0245d08148281d3464a0ee7811807.jpg)
SMU Explains: How the TRQ With the EU Works
Written by Michael Cowden
November 2, 2021
The tariff-rate quota, or TRQ, replacing Section 232 tariffs on steel and aluminum imported from the European Union will go into effect on Jan. 1, 2022, per details of the agreement released by the Office of the United States Trade Representative (USTR).
A 25% tariff will be still applied after the quota limit – 3.3 million metric tonnes – for steel is reached. The pact also extends U.S. “melted and poured” policies to the EU – as SMU reported on Friday.
Other key details of the deal are below.
They come from USTR documents that you can find here. They support much of what SMU reported last week ahead of the deal officially being unveiled.
• The quota. The quota limit will initially be set at approximately 3.3 million metric tonnes (3.6 million short tons). That amount will be divvied among EU member states and among 54 steel product categories. The quota limit was based on import volumes from 2015-17. The quota will be administered on a “first-come, first served basis.” And the U.S. government will create a public website showing how much quota tonnage remains available by product for any given quarter.
• Rollover tons. The annual TRQ on the EU, like the Section 232 quotas on South Korea and Brazil, will be administered on a quarterly basis. This is aimed at preventing surges in imports at the beginning of the year. Any unused volume from the first quarter, up to 4% of the total quota volume for that quarter, can be rolled into the third quarter. Unused tons from the second quarter will roll into the fourth quarter. And unused tons from the third quarter will roll over into the first quarter of the following year. Think of it like rollover data on your cell phone plan.
• Yearly adjustments. The quota will be adjusted annually based on U.S. Steel demand, also known as apparent steel consumption, as determined by the World Steel Association. If demand is 6% above 2021 levels, the quota will increase by 3%. And the reverse is true should demand fall by 6%.
• Melted and poured. Only steel “melted and poured” in the EU will be eligible for duty-free treatment. Material rolled from slabs melted and poured outside of the EU – in Russia or China, for example – would remain subject to the 25% tariff. It is up to importers to provide documentation proving compliance with melted-and-poured requirements. It was not immediately clear to SMU whether this language might result in reduced slab imports from Russia but increased pig iron imports.
• Exclusions. The Section 232 exclusion process has been grandfathered into the new TRQ deal with the EU. Material from the EU that had been exempted from Section 232 tariffs – assuming it was shipped in fiscal year 2021 – won’t count against the new quota. At least not initially. Products that were exempt from Section 232 will remain exempt from the TRQ for two calendar years. In other words, importers of these products won’t need to re-apply for exemptions until Dec. 31, 2023.
• Review process. The U.S. will evaluate how the TRQ is working every three months beginning no later than April 1, 2022. The EU can also request that a review be conducted if there is “substantial” underuse of the TRQ.
Background
Recall that Section 232 national security tariffs and quotas were rolled out by the Trump administration in 2018. The measure imposed across-the-board tariffs of 25% on steel from EU member states and many other nations – regardless of whether they were U.S. allies. Some nations – Brazil and South Korea, for example – agreed to an absolute quota, or “hard quota,” in exchange for exemption from the 25% tariff.
A TRQ, also known as a “soft quota,” allows imports below a quota ceiling to come into the U.S. without a tariff. After that quota limit is reached, imports can still come in – but they are subject to a 25% tariff.
That flexibility is the primary difference between a TRQ and an absolute, or hard, quota. And it allows business flows to continue largely uninterrupted.
An absolute quota means once the quota ceiling is reached, no more material can come in. That has caused supply chain problems for domestic re-rollers, for example, that source slabs from Brazil.
Brazilian slab is cheaper than slab from other countries because it is not subject to the 25% tariff. But once the Section 232 quota ceiling is reached, the material cannot enter the U.S. until the following quarter – resulting in mills sometimes running short of their slab requirements.
The EU had always opposed Section 232 because it was based on national security grounds. That made no sense to the EU, which is a key U.S. ally. And the EU from the time Section 232 was unveiled had expressed a preference for a TRQ.
The deal with the EU could set a precedent for TRQs with other U.S. allies such as Japan and the UK, market participants have told SMU.
By Michael Cowden, Michael@SteelMarketUpdate.com
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/2024/02/SMU_MC_headshot-150x150.png)
Michael Cowden
Read more from Michael CowdenLatest in Trade Cases
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/galvanized_coil.png)
Leibowitz: The consequences of a new barrage of trade cases on coated steel
Domestic steel producers and the United Steelworkers (USW) union filed a barrage of trade cases last week. This is hardly news. Ever since the Commerce Department ruled that Vietnam is still treated as a nonmarket economy (NME) for antidumping purposes, many in the business expected new cases on the product that Vietnam excels at—“corrosion-resistant steel.” Nor is it a surprise that these cases roped in nine countries in addition to Vietnam: Australia, Brazil, Canada, Mexico, the Netherlands, South Africa, Taiwan, Turkey, and the United Arab Emirates. All these countries rank in the top ten exporters of corrosion-resistant steel to the United States. These petitions are a broadside against coated flat-rolled steel imports.
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/investigate.png)
Coated trade case alleges hefty dumping margins
Domestic mills have alleged substantial dumping margins in the trade case targeting imports of corrosion-resistant steel.
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/fist.png)
US mills file sprawling trade case against coated imports from 10 nations
US mills have filed or soon will file a sprawling trade petition against imports of coated flat-rolled steel from 10 countries. The petition seeks anti-dumping margins against Canada, Mexico, Brazil, the Netherlands, Turkey, the United Arab Emirates, Vietnam, Taiwan, Australia, and South Africa. It also seeks countervailing duty margins against Canada, Mexico, Brazil, and Vietnam. That’s according documents dated Sept. 5 and addressed to Commerce Secretary Gina Raimondo and International Trade Commission (ITC) Secretary Lisa Barton.
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/media/k2/items/src/cbd2ad03f626e665deb71b2742b25bbb.jpg)
Steel Summit 2024: Trade issues abound ahead of election
Trade is always front and center in an election year. And 2024 is no different. There is no shortage of issues, with questions like the sale of U.S. Steel to Japan’s Nippon Steel, potential cracks in the USMCA, and Chinese overcapacity dominating the headlines. But how do you distinguish between issues that might just last until November, and what are the crucial questions that could affect your business for years to come?
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/fist.png)
US senators urge reduction to S. Korean OCTG quota
https://www.brown.senate.gov/newsroom/press/release/sherrod-brown-casey-fetterman-biden-administration-level-playing-field-american-octg-industry