International Steel Prices

Foreign Steel Up to 40% Cheaper than Domestic

Written by Brett Linton


As domestic hot rolled steel prices climb upwards of $1,900 per ton, foreign steel imports continue to tempt U.S. buyers, according to Steel Market Update’s latest foreign versus domestic hot rolled steel price comparison. While domestic prices have risen week after week, foreign prices have remained steady to down, holding potential discounts of 13% to 40% after taking freight costs, trader margins and tariffs into consideration. Current foreign HRC prices are theoretically $247-767 per ton cheaper than domestic steel prices. The spread between domestic and foreign prices has surged since late-May, surpassing the record levels seen earlier this year.

The following calculation is used by Steel Market Update to identify the theoretical spread between foreign hot rolled steel prices (delivered to U.S. ports) and domestic hot rolled coil prices (FOB domestic mills). This is only a “theoretical” calculation as freight costs, trader margins and other costs can fluctuate, ultimately influencing the true market spread. This compares the SMU U.S. hot rolled weekly index to CRU hot rolled weekly indices for Germany, Italy and Far East Asian ports.

SMU includes a 25% import tariff effective on foreign prices after March 23, 2018. We then add $90 per ton to the foreign prices in consideration of freight costs, handling, trader margin, etc., to provide an approximate “CIF U.S. ports price” that can be compared against the SMU U.S. hot rolled price. Note that we do not include any antidumping (AD) or countervailing duties (CVD) in this analysis.

Far East Asian HRC (East and Southeast Ports)

As of Wednesday, Aug. 11, the CRU Far East Asian HRC price remained steady at $835 per net ton ($920 per metric ton), unchanged from both last week and two weeks prior. Adding tariffs and import costs, the delivered price of Far East Asian HRC to the U.S. is $1,133 per ton. The latest SMU hot rolled price average is $1,900 per ton, up $10 over last week and up $40 from two weeks prior. Therefore, U.S.-produced HRC theoretically is now $767 per ton more expensive than imported Far East Asian HRC, up from $757 last week, and up from $727 two weeks ago. This is now the largest theoretical spread between Far East Asian and domestic HRC prices in SMU’s four-year history (we have seen a new record spread each of the last 12 weeks). Prior to 2021, the previous record high was $183 per ton in March 2018.

Italian HRC

CRU published Italian HRC prices at $1,165 per net ton ($1,284 per metric ton), down $3 from last week, and down $36 from two weeks ago. After adding tariffs and import costs, the delivered price of Italian HRC is approximately $1,547 per ton. Accordingly, domestic HRC is theoretically $353 per ton more expensive than imported Italian HRC, up from $339 the week prior, and up from $268 two weeks ago. This is now the largest price spread in our history (we have seen a new record spread each of the last four weeks), surpassing the previous high of $210 per ton seen in mid-March 2021. Prior to 2021, the previous record high was $143 per ton in July 2016. Recall that in late-May/early-June, Italian HRC briefly lost its price advantage over domestic steel for two weeks.

German HRC

The latest CRU German HRC price is $1,250 per net ton ($1,378 per metric ton), down $13 from last week, and down $8 from two weeks ago. After adding tariffs and import costs, the delivered price of German HRC is approximately $1,653 per ton. Accordingly, domestic HRC is theoretically $247 per ton more expensive than imported German HRC, up from $221 last week, and up from $197 two weeks ago. This is now the largest price spread in our history (we have seen a new record spread three of the past four weeks), surpassing the previous high of $172 seen in mid-March 2021. Prior to 2021, the previous record high was $121 per ton in March 2018. Like Italian HRC, German HRC briefly lost its price advantage over domestic steel for two weeks in late-May/early-June.

The graph below compares all four price indices and highlights the effective date of the tariffs. Foreign prices are referred to as “equalized,” meaning they have been adjusted to include tariffs and importing costs for a like-for-like comparison against the U.S. price.

Note: Freight is an important part of the final determination on whether to import foreign steel or buy from a domestic mill supplier. Domestic prices are referenced as FOB the producing mill, while foreign prices are FOB the Port (Houston, NOLA, Savannah, Los Angeles, Camden, etc.). Inland freight, from either a domestic mill or from the port, can dramatically impact the competitiveness of both domestic and foreign steel. When considering lead times, a buyer must take into consideration the momentum of pricing both domestically and in the world markets. In most circumstances (but not all), domestic steel will deliver faster than foreign steel ordered on the same day.

By Brett Linton, Brett@SteelMarkeUpdate.com

Brett Linton

Read more from Brett Linton

Latest in International Steel Prices