Steel Mills
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/media/k2/items/src/d161f4a106d164569f18b347f7a0ccc0.jpg)
USS Edgar Thomson Plant Hit by Unplanned Outage: Sources
Written by Michael Cowden
April 6, 2021
U.S. Steel’s Edgar Thomson Plant in Braddock, Pa., has been hit by an unplanned outage stemming from a burst water main, according to sources familiar with the matter.
Crews have been working to repair the issue at the Pittsburgh-area steel mill since approximately 2:30 a.m. ET on Tuesday, April 6, they said.
U.S. Steel, which is based in Pittsburgh, did not immediately respond to a request for comment for this article.
It’s not clear how long the repairs will take. And it’s possible that they could be completed within a day or a matter or days, sources said. But the outage has in the meantime resulted in both blast furnaces at Edgar Thomson being taken offline as well as the mill’s basic oxygen furnace, slab caster and powerhouse, they said.
One source described the mill as at a “standstill.”
Edgar Thomson, which is part of U.S. Steel’s Mon Valley Works, has two blast furnaces, the No. 1, which has annual capacity of 1.09 million tons, and the No. 3, which sports capacity of 1 million tons per year, according to the Association for Iron and Steel Technology’s 2021 directory of iron and steel plants.
The facility melts iron ore from Minnesota and coke from U.S. Steel’s coke batteries in nearby Clairton, Pa., into liquid iron. That iron is refined into steel and then cast into slabs that are sent to the company’s Irvin Plant in West Mifflin, Pa., to be rolled into flat-rolled steel used in the appliance, automotive and construction industries, according to U.S. Steel’s website.
The move comes during a period of record-high domestic steel prices, extended lead times, and extremely limited spot supplies.
By David Schollaert, David@SteelMarketUpdate.com and Michael Cowden, Michael@SteelMarketUpdate.com
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/2024/02/SMU_MC_headshot-150x150.png)
Michael Cowden
Read more from Michael CowdenLatest in Steel Mills
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/ArcelorMittal.png)
ArcelorMittal posts solid results as commissioning of Calvert EAF begins
AM/NS Calvert has begun commissioning its new electric-arc furnace, with plans to reach its full annual run rate of 1.65 million short tons a year from now.
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/Tampa.Steel.Conference.jpg)
Tampa Steel Conference: Tanners on rising capacities and storms brewing across steel
There's a lot of production waiting to come online
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/US_Steel.png)
USS idles “B” battery at Clairton following explosion
U.S. Steel has idled its "B" Battery at its Clairton Coke Works near Pittsburgh following a “release of excess pressure” inside a section of the battery on Feb. 5.
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/ArcelorMittal.png)
ArcelorMittal to start building Calvert NGO electrical steel line this year
ArcelorMittal announced on Thursday that it will begin the construction of its new $1.2-billion electrical steel mill in Alabama later this year. The steelmaker said it is proceeding with plans to build the new greenfield mill near its existing AM/NS joint venture in Calvert, Ala. The ArcelorMittal Calvert plant will have an annealing pickling line, […]
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/AISI.png)
AISI: US steel shipments rise in December
Domestic steel shipments increased month over month and year on year in December, according to the latest data from the American Iron and Steel Institute (AISI). US steel mills shipped 7,145,016 short tons (st) in December, up 0.9% from 7,082,921 st in December 2023 and 6.6% higher than 6,702,557 st in November 2024. For the full-year […]