U.S. electric-arc furnace mills have a leg up on the world when it comes to meeting new carbon emissions standards–for now, said CRU Senior Analyst Ryan Smith. That’s according to a “carbon curve” Smith presented that is part of CRU Group’s Emissions Analysis Tool. The carbon curve is similar to the cost curve many steel […]
NLMK USA has slated an approximately one-week maintenance outage in June on the melt shop and hot strip mill at its facility in Portage, Ind., a company official confirmed. The plant-wide outage is for routine semi-annual maintenance and “isn’t a big deal,” said NLMK USA Executive Vice President James Banker. The Portage electric-arc furnace (EAF) […]
FOB mills prices aren’t the only thing on the rise – so too are service center resale prices, import tags and ocean freight rates. Service centers are selling amongst each other for nearly $1,400 per ton ($70/cwt), and certain master distributors are charging that much if not more for hot band, market participants said. That’s […]
General Motors continues to crank out some full-size pickup trucks despite a microchip shortage. The Detroit-based automaker is doing so by shipping certain vehicles without chip-containing components necessary for reducing fuel consumption, a company spokesman confirmed. “Due to the global shortage of semiconductors impacting the global auto industry, we are making Active Fuel Management/Dynamic Fuel […]
Reducing carbon isn’t just something that steel wants to do to be a good corporate citizen, it’s increasingly something that key customers – such as automakers – are demanding. Case in point: German automaker BMW is investing in a CO2-free steel production process developed by Boston Metal, a U.S.-based start-up. Boston Metal has found a way […]
U.S. Steel expects a solid first quarter thanks to firm demand and as record high flat-rolled steel prices flow through to its bottom line. “Strong market conditions and our well-timed acquisition of Big River Steel are allowing us to drive significant earnings growth,” U. S. Steel President and Chief Executive Officer David B. Burritt said […]
The United States’ two leading steel industry associations have cheered the Senate confirmation of Michael Regan, the new head of the Environmental Protection Agency. The move comes as the U.S. steel industry increasingly looks to burnish its credentials as a green industry – and as the potential of a carbon-border tax boosts the economic viability […]
The semiconductor shortage that forced General Motors to extend assembly plant outages continues to impact production at other North American automakers as well. Case in point: Toyota’s Tundra pickup truck assembly plant in San Antonio, Texas, where it’s not clear how long the production disruption might last. The chip shortage been an issue for Toyota […]
AM/NS Calvert has a planned maintenance outage coming up, a company spokeswoman confirmed. The outage is expected to take place in May on the Alabama steel mill’s hot-strip mill, market participants said. The spokeswoman did not confirm when the outage would take place or on what part of the mill repairs or upgrades would be […]
Nucor’s tubular products group aims to increase prices for hollow structural sections (HSS), mechanical tubing and piling product by $125 per ton ($6.25/cwt) effective immediately. “The increase is a result of rising raw material costs, strong demand and (the) volatility of transportation costs,” the steelmaker said in a letter to customers on Thursday, March 11. Nucor […]
Ternium plans to start up its new hot-strip mill in Pesquería, outside of Monterrey, Mexico, in early June, according to market participants. The development has allowed the Latin American steelmaker to take June orders for customers in the U.S, sources said. Those tons from will be rolled from Ternium’s existing hot-strip mills, something that is […]
Hot-rolled coil import volumes from South Korea appear poised to dip in March versus February because the country is nearing its first-quarter Section 232 quota limit, according to government figures. U.S. buyers have imported 87,493.74 tonnes of South Korean hot-rolled coil from the beginning of the year through March 10, according to data from U.S. Customs and […]
At least two U.S. tube mills plan to increase prices for non-energy tubulars by $125 per ton ($62.50/cwt) effective immediately, according to letters to customers. North of the border, meanwhile, Welded Tube of Canada aims to increase prices on hollow structural sections (HSS) and mechanical tubing by $160 per ton CAD, also effective immediately. Atlas […]
Plate from South Korean steelmaker Hyundai is being offered for $980-1,020 per ton ($49-51/cwt) for third-quarter delivery to U.S. ports, according to market participants. The lower end of that range is representative of the delivered duty paid (DDP) price to Gulf Coast ports. The higher end of the range is for delivery to West Coast […]
Allegheny Technologies Inc. (ATI) is converting slabs for two domestic mills and one Brazilian steelmaker, according to market participants. ATI is re-rolling slabs for Brazilian steelmaker Companhia Siderúrgica Nacional (CSN) as well as for U.S. steelmakers JSW Steel USA and NLMK USA, sources told Steel Market Update. The issue is relevant because the United Steelworkers […]
The U.S Department of Commerce has decided to continue antidumping duties on cut-to-length plate imported from China, Russia and Ukraine as part of the “sunset review” process. China will remain subject to dumping margins of up to 128.59%, Russia to dumping margins of as much as 185% and Ukraine to margins of up to 237.91%, […]
Availability from domestic sheet mills is getting worse again after briefly improving last month, according to some market participants. The trend follows winter storms taking out production at electric-arc furnace (EAF) producers in the southern U.S. in February and ahead of a raft of upcoming maintenance outages in the second and third quarter, sources said. […]
Availability from domestic sheet mills is getting worse again after briefly improving last month, according to some market participants. The trend follows winter storms taking out production at electric-arc furnace (EAF) producers in the southern U.S. in February and ahead of a raft of upcoming maintenance outages in the second and third quarter, sources said. […]
Altos Hornos de México (AMSA) has resumed normal operations at its No. 5 blast furnace following a temporary outage last month, a company spokesman said. The No. 5 furnace had to stop for two days because of severe weather and a natural gas shortage. The Mexican flat-rolled steelmaker last month said that it had lost […]
Altos Hornos de México (AMSA) has resumed normal operations at its No. 5 blast furnace following a temporary outage last month, a company spokesman said. The No. 5 furnace had to stop for two days because of severe weather and a natural gas shortage. The Mexican flat-rolled steelmaker last month said that it had lost […]
Algoma Steel Inc. aims to raise sheet and plate prices by $40 per ton ($2/cwt) effectively immediately for new spot orders. The price hike applies equally to hot-rolled coil, cold-rolled coil, as-rolled plate and heat-treated plate, the Canadian flat-rolled steelmaker said in letters to customers on Friday, March 5. Published extras will also be applied to […]
JSW Steel USA will resume melting and slab casting at its electric-arc furnace (EAF) sheet mill in Mingo Junction, Ohio, the week of March 7, the company’s top executive said. The steelmaker has also decided to begin the process of restarting its pipe mill in Baytown, Texas, JSW Steel USA CEO Mark Bush told Steel Market […]
Companhia Siderúrgica do Pecém (CSP) has delayed a scheduled shutdown of its blast furnace until the second half of 2021, a company spokeswoman said. The Brazilian steelmaker had originally planned to undertake the shutdown, necessary to implement “processes improvement,” in the second quarter of this year. “The initial date was postponed mainly due to the […]
Biden administration Commerce Secretary Gina Raimondo described Section 232 tariffs on imported steel and aluminum as “effective” on Thursday. “The data show that those tariffs have been effective,” Secretary Raimondo said in an interview with MSNBC. Raimondo’s comments are important because trade policies such as Section 232, which Trump rolled out in March 2018, fall […]
Flat-rolled steel imports to the United States rebounded in February, weighing in at their highest monthly total in more than a year. Hot-rolled imports, meanwhile, hit their highest point in more than two years, according to Commerce Department figures. And the trend is only just getting started, according to some market participants. The U.S. was […]
General Motors has extended production shutdowns at three North American plants because of a continuing microchip shortage. In addition, the automaker said it would take downtime at its Gravatai plant in Brazil. “Our intent is to make up as much production lost at these plants as possible,” a GM spokesman said on Wednesday, March 3. […]
SSAB Americas raised some eyebrows in the steel market when it officially announced a “scrap collar” along with an $80-per-ton ($4/cwt) plate price increase earlier this week. The move, while not unheard of in the steel market, is not necessarily typical for standard spot market plate orders, some buyer sources said. An SSAB Americas spokeswoman […]
SSAB Americas raised some eyebrows in the steel market when it officially announced a “scrap collar” along with an $80-per-ton ($4/cwt) plate price increase earlier this week. The move, while not unheard of in the steel market, is not necessarily typical for standard spot market plate orders, some buyer sources said. An SSAB Americas spokeswoman […]
NLMK USA expects United Steelworkers (USW) union members at its steel mill in Farrell, Pa., to return to work on Monday, March 8, a company official said. The steelmaker plans to ramp up its hot mill in western Pennsylvania in March. April will see downstream facilities resume normal operating rates, NLMK USA Executive Vice President […]
NLMK USA expects United Steelworkers (USW) union members at its steel mill in Farrell, Pa., to return to work on Monday, March 8, a company official said. The steelmaker plans to ramp up its hot mill in western Pennsylvania in March. April will see downstream facilities resume normal operating rates, NLMK USA Executive Vice President […]