According to Baker Hughes data from January 9th, 2015, the U.S rig count for this week is 1,750 rigs exploring for or developing oil or natural gas. This count is a decrease of 61 rigs when compared to last week, with oil rigs down 61 to 1,421 rigs, gas rigs up 1 to 329 rigs, […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S. indicates hot rolled coil price momentum continued its downward trend for the 20th week in a row and is at the lowest level recorded since mid-March 2014. MoMo, a trailing indicator, is measured as a percentage and shows the relation of […]
Today we are producing two foreign steel import reports. This one is our normal report and we have a second one following which will look at imports from a different view point. The second report also addresses both long and flat rolled products and is normally available only to our Premium level members. The U.S. […]
For the week ending January 2, 2015, the American Iron & Steel Institute (AISI) estimated that the U.S. steel industry produced 1,857,000 net tons (NT) of raw steel, a 6.4 percent increase over the previous week and a 3.9 percent increase over the same week one year ago. The estimated capacity utilization rate is 77.2 […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S. indicates hot rolled coil price momentum continued its downward trend for the 19th week in a row. MoMo, a trailing indicator, is measured as a percentage and shows the relation of the current hot rolled coil (HRC) price movements against the […]
The U.S. Department of Commerce updated the December 2014 steel import license data. As suspected the volume of requests dropped dramatically from the 4.0 million net ton pace we were seeing earlier in the month to 3.0+ million tons as of December 30th. December total steel imports (alloy and carbon) should be approximately 500,000 tons […]
The spread between world hot rolled export pricing and that of the domestic average here in the United States is shrinking based on our recent analysis. The following is a calculation used by Steel Market Update in order to analyze the spread between world hot rolled export prices and domestic (USA) hot rolled prices. SMU […]
For the week ending December 27, 2014, the American Iron & Steel Institute (AISI) estimated that the U.S. steel industry produced 1,746,000 net tons (NT) of raw steel, a 5.5 percent decrease over the previous week and a 2.3 percent decrease over the same week one year ago. The estimated capacity utilization rate is 72.6 […]
The American Iron & Steel Institute (AISI) recently reported final raw steel production estimates for the month of November 2014. This estimation is different than the weekly raw steel production as it is based on 75 percent of the domestic mills reporting vs. 50 percent for the weekly estimates. Total raw steel production for the […]
According to Baker Hughes data from December 29th, 2014, the U.S rig count for this week is 1,840 rigs exploring for or developing oil or natural gas. This count is a decrease of 35 rigs when compared to last week, with oil rigs down 37 to 1,499 rigs, gas rigs up 2 to 340 rigs, […]
For the week ending December 20, 2014, the American Iron & Steel Institute (AISI) estimated that the U.S. steel industry produced 1,848,000 net tons (NT) of raw steel, a 1.7 percent decrease over the previous week but a 3.4 percent increase over the same week one year ago. The estimated capacity utilization rate is 76.8 […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S. indicates hot rolled coil price momentum continued its downward trend for the 17th week in a row. MoMo, a trailing indicator, is measured as a percentage and shows the relation of the current hot rolled coil (HRC) price movements against the […]
The American Institute of Architects (AIA) released their Architecture Billings Index (ABI) score for the month of November on Wednesday this week, reporting that the latest index is at the lowest point in the last seven months. The ABI score for November was 50.9, down 2.8 points from October’s score of 53.7. Note that the […]
Peter Wright wrote an article in our last issue about the accuracy of the steel import license data. What Peter was referring to was the license data reported at the conclusion of the month and before the preliminary and final census data are reported. Steel Market Update begins to analyze the data beginning in the […]
Below is the latest data issued by the the Air-Conditioning, Heating, and Refrigeration Institute (AHRI) regarding residential and commercial heating and cooling equipment shipments through October 2014. You may read the press release on their website here. Residential Storage Water Heaters U.S. shipments of residential gas storage water heaters for October 2014 increased 5.2 percent, […]
For the week ending December 13, 2014, the American Iron & Steel Institute (AISI) estimated that the U.S. steel industry produced 1,880,000 net tons (NT) of raw steel, a 0.2 percent increase over the previous week and a 5.1 percent increase over the same week one year ago. The estimated capacity utilization rate is 78.2 […]
According to Baker Hughes data from December 12th, 2014, the U.S rig count for this week is 1,893 rigs exploring for or developing oil or natural gas. This count is a decrease of 27 rigs when compared to last week, with oil rigs down 29 to 1,546 rigs, gas rigs up 2 to 346 rigs, […]
The following is a calculation used by Steel Market Update in order to analyze the spread between world hot rolled export prices and domestic (USA) hot rolled prices. SMU compares the world hot rolled export price using a range of adders for freight, handling, trader margin, etc. This is then compared to the spot (FOB […]
Apparent steel supply for October 2014 was 10,954,832 net tons, the highest monthly figure we have seen since the beginning of the Great Recession. Apparent steel supply is calculated by adding domestic shipments and finished US imports and subtracting total US exports. October supply represents a 1,509,671 ton or 16.0 percent increase compared to the […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S. indicates hot rolled coil price momentum continued its downward trend for the 16th week in a row. MoMo, a trailing indicator, is measured as a percentage and shows the relation of the current hot rolled coil (HRC) price movements against the […]
Total October steel imports were recently finalized by the US Department of Commerce at 4,441,271 net tons (4,029,058 metric tons), surpassing the previous high of 4,417,811 tons in August 1998. October had been on pace to be a high tonnage month, but previous preliminary data figures were a few thousand tons shy of breaking the […]
October steel exports totaled 1,010,089 net tons (916,338 metric tons), down 2.3 percent over September and down 10.9 percent from October 2013 (all products). Cut plate exports declined 16.1 percent from September to October to 108,527 tons, but were up 0.6 percent compared to levels one year prior. Exports of coiled plate were 39,950 tons in […]
Based on preliminary Chinese data, total steel exports from China were 9.7 million metric tons (10.7 million net tons) for the month of November, a 14 percent increase from the previous month and a 94 percent increase from November 2013 tonnage. This brings total 2014 exports to 83.6 million tons (92.2 million net tons). To […]
October ferrous scrap exports totaled 1,473,856 net tons (1,337,061 metric tons) with Turkey, Taiwan, Korea, Canada, and Saudi Arabia being the top five countries receiving scrap from the United States. These five countries accounted for 72.4 percent of all scrap exports. Total October ferrous scrap exports were 14.9 percent higher than previous month and 1.5 […]
For the week ending December 6, 2014, the American Iron & Steel Institute (AISI) estimated that the U.S. steel industry produced 1,877,000 net tons (NT) of raw steel, a 2.3 percent increase over the previous week and a 5.0 percent increase over the same week one year ago. The estimated capacity utilization rate is 78.0 […]
According to Baker Hughes data from December 5th, 2014, the U.S rig count for this week is 1,920 rigs exploring for or developing oil or natural gas. This count is an increase of 3 rigs when compared to last week, with oil rigs up 3 to 1,575 rigs, gas rigs unchanged at 344 rigs, and […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S. indicates hot rolled coil price momentum continued its downward trend for the 15th week in a row. MoMo, a trailing indicator, is measured as a percentage and shows the relation of the current hot rolled coil (HRC) price movements against the […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. The total number of indicators considered in this analysis is currently 36. The Chicago Fed Mid-West Manufacturing Index which was suspended earlier this year was expected to be re-instituted this month but […]
For the week ending November 29, 2014, the American Iron & Steel Institute (AISI) estimated that the U.S. steel industry produced 1,835,000 net tons (NT) of raw steel, a 2.5 percent decrease over the previous week but a 0.5 percent increase over the same week one year ago. The estimated capacity utilization rate is 76.3 […]
The following is a “hypothetical” calculation of the spread between world hot rolled export prices and domestic (USA) hot rolled prices. SMU compares the world hot rolled export price with hypothetical adders for freight, handling, trader margin, etc. This is then compared to the spot (FOB Mill) domestic hot rolled price using the SMU Hot […]