The latest SMU Market Survey results are now available on our website to all Premium members. After logging in at SteelMarketUpdate.com, visit the Analysis tab and look under the “Survey Results” section for “Latest Survey Results.” The historical survey results presentations also are available in the Survey Results section for “Survey Results History.” If you […]
The number of active oil and gas drill rigs in the U.S. and Canada was flat or fell this week after gains in prior weeks, according to recent data released by oilfield services company Baker Hughes. The active drill rig count is important to the steel industry because it is a leading indicator of oil […]
Steel mill lead times remain short, but yielded minor upward movements this week for most products, based on Steel Market Update’s latest check of the market. SMU’s data on mill negotiations shows buyers still have the upper hand. Buyers polled this week by SMU reported mill lead times ranging from 2-6 weeks for hot rolled, […]
Last year when hot rolled coil prices in the U.S. surged to record highs, foreign steel was hundreds of dollars cheaper, and import orders skyrocketed. Now that U.S. steel prices have come back to earth, foreign steel has lost that competitive advantage. Foreign HRC prices are now approximately $45-108 per ton more expensive than domestic steel, […]
February marked month six of declining steel prices, following a 12-month streak of continuous price increases. Hot rolled prices declined $215 per ton throughout the month, with the SMU index averaging $1,020 per ton at the end of February (recall our HR average this week declined another $20 to $1,000 per ton). The SMU Price Momentum Indicator for sheet products was […]
Sheet prices fell again this week. But price declines for hot-rolled coil have slowed, with HRC tags down $20 per ton ($1 per cwt) and coalescing around $1,000 per ton. While some mills were reported to be cutting deals as low as $900 per ton, others were said to be mulling price hikes. Cold-rolled and […]
Preliminary Census data shows that steel imports in January rose 7% month-over-month to 3.08 million net tons, the highest monthly level seen in the past two years. February import licenses through March 1 are currently at 2.20 million tons, a 29% decline from January and down 24% compared to December. Note that the latest U.S. […]
California Steel Industries, Nucor and USS-UPI notified customers of an upward revision to their galvanized steel coating extras earlier this week. Prior to this change, many mills had revised their galvanized coating extras in late-2021, with new prices going into effect in January 2022. Although the reason for these updated extras was not specifically mentioned by […]
Join us in Memphis, Tenn., for the next LIVE Steel 101 workshop on April 19-20, 2022. We are pleased to offer our first in-person course since the pandemic and will include an in-person tour of Nucor Steel Arkansas. Steel Market Update’s Steel 101: Introduction to Steelmaking & Market Fundamentals workshop has been helping businesses empower their employees (from […]
Sheet prices fell hard again this week. Our average hot-rolled coil number now stands at $1,020 per ton ($51/cwt), down $60 per ton from last week and marking the lowest point for HRC prices since January 2021. Large buyers reported deals in the mid-$900s. Another notable trend: Prices for coated products led the way downward […]
The number of active oil and gas drill rigs continues to recover in both the U.S. and Canada, according to recent data released by oilfield services company Baker Hughes. The active drill rig count is important to the steel industry because it is a leading indicator of oil country tubular goods (OCTG) demand. The number […]
The latest SMU Market Survey results are now available on our website to all Premium members. After logging in at SteelMarketUpdate.com, visit the Analysis tab and look under the “Survey Results” section for “Latest Survey Results.” The historical survey results presentations also are available in the Survey Results section for “Survey Results History.” If you […]
Prices for five of the seven steelmaking raw materials tracked in this SMU analysis increased over the last 30 days, with only one product decreasing. Through Feb. 17, iron ore prices rose 18% from one month prior, aluminum prices increased 10%, coking coal prices rose 9%, zinc prices were up 3%, and pig iron prices […]
Foreign steel imports from the three regions tracked by Steel Market Update have nearly lost their price advantage over domestic steel, according to our latest foreign versus domestic hot rolled steel price comparison. Foreign HRC prices are now theoretically just $7-80 per ton cheaper than domestic steel, after taking freight costs, trader margins and tariffs […]
Steel prices saw another big drop this week, taking the benchmark price for hot rolled below $1,100 per ton for the first time since January 2021. Cold rolled and coated products registered double-digit declines as well, while plate prices appear to be holding their own, according to Steel Market Update’s check of the market on […]
U.S. apparent steel supply levels slipped 3% from November to December, down 286,000 net tons to 9.48 million net tons, according to the latest U.S. Department of Commerce and American Iron and Steel Institute data. Recall that September 2021 saw the highest monthly supply level in over six years, going back to January 2015 when supply surpassed 10 […]
According to the latest Steel Market Update data, the spread between hot rolled coil prices and prime scrap is slowly shrinking from the September 2021 peak. The latest spread is in line with levels seen in early-2021 but two times higher than pre-pandemic spreads. {loadposition reserved_message} Last week, the SMU hot rolled price average declined for the […]
U.S. heating and cooling equipment shipments in December rose 3.7% from November to 1.85 million units, according to recent data from the Air-Conditioning, Heating, and Refrigeration Institute (AHRI). Total shipment levels are up 2.4% from those seen one year prior. Recall that 2020 monthly shipment levels were somewhat erratic; shipments in the second quarter were significantly impacted […]
According to the latest Steel Market Update data, the spread between hot rolled coil prices and prime scrap is slowly shrinking from the September 2021 peak. The latest spread is in line with levels seen in early-2021 but two times higher than pre-pandemic spreads. Last week, the SMU hot rolled price average declined for the 18th consecutive […]
December U.S. steel exports fell 10% from the month prior to 654,000 net tons, according to the latest U.S. Department of Commerce data. While the last few months have seen declining export levels, the 12-month moving average through December is now at a 33-month high. December exports are up 6% compared to levels one year […]
Final Census data shows U.S. steel imports fell 8% from November to December to 2.89 million net tons, the fifth highest monthly level in 2021. January import licenses through Feb. 7 are currently at 3.04 million tons, a 5% jump from December, but down 4% compared to November. Recall that total imports in September had reached a 28-month […]
U.S. raw steel production marginally increased from November to December to 7.83 million net tons, according to recently released American Iron and Steel Institute data. Recall that in August, production reached a 20-month high of 8.29 million tons. December production was up 691,000 tons or 10% compared to the same month last year. Note that […]
The Energy Information Administration’s February Short-Term Energy Outlook (STEO) continues to predict a wide range of potential outcomes for future global energy consumption, due to the ongoing pandemic recovery and evolving effects of consumer behavior. EIA forecasts oil prices to remain near current levels in the coming months, while natural gas prices could experience volatility as winter temperatures drive demand and prices. Spot […]
Sheet prices continue to fall, but the pace of declines has moderated on the hot-rolled coil side. SMU’s average hot-rolled coil price now stands at $1,190 per ton ($59.50 per cwt), down $45 per ton from $1,235 per ton last week. This weeks’ drop was less than half the $100-per-ton decline recorded last week. And […]
The number of active oil and gas drill rigs continued to recover in both the U.S. and Canada this past week, according to data released Friday by oilfield services company Baker Hughes. The rig count is important to the steel industry because it is a leading indicator of oil country tubular goods (OCTG) demand. The […]
The latest SMU Market Survey results are now available on our website to all Premium members. After logging in at SteelMarketUpdate.com, visit the Analysis tab and look under the “Survey Results” section for “Latest Survey Results.” The historical survey results presentations also are available in the Survey Results section for “Survey Results History.” If you […]
Hot rolled imports continue to tempt U.S. buyers with potential discounts of 14-23% over domestic prices, according to Steel Market Update’s latest foreign versus domestic price comparison. Foreign hot rolled steel prices are now theoretically $177-283 per ton cheaper than domestic steel, after taking freight costs, trader margins and tariffs into consideration. However, this foreign […]
Flat rolled steel prices declined by another $60-100 per ton in the past week, pushing the benchmark hot rolled price down to $1,235 per ton. That’s a decline of about 37% or a total of $720 per ton since the market peaked five months ago. Why the sharp decline? An imbalance between supply and demand […]
SMU continues to hear that domestic HR prices are moving lower, in particular for large orders. Are mills trying to keep lead times above three weeks, are we going back to a cost plus model on the EAF side, or is it something else entirely? This isn’t 2008-09 or even 2014-15. The music hasn’t stopped […]
January marked the fifth consecutive month of declining steel prices, following a year-long streak of continuous price increases. Hot rolled prices declined $200 per ton throughout the month, with the SMU index averaging $1,335 per ton ($66.75 per cwt) as of Tuesday, Jan. 25. The SMU Price Momentum Indicator for sheet products remains at Lower since its mid-October adjustment. January […]