Preliminary Census data indicates that June steel imports will total 2.81 million net tons, just 61,000 tons higher than May levels. June figures are down 9% compared to March’s 26-month high of 3.09 million tons. Import licenses for July are currently at 2.15 million tons through July 25th data. (July figures are expected to increase as import […]
Steel Market Update sources expect ferrous scrap prices to weaken further in August, potentially registering the fourth consecutive month of declines since March and April’s record high prices. Obsolete grades are anticipated to decrease around $30 per gross ton over July, while prime scrap is expected to ease marginally. “Despite what I think is slightly […]
Foreign hot-rolled steel imports have all but lost their appeal this week and are now at levels comparable to domestic steel prices, according to Steel Market Update’s latest analysis. Since mid May, US steel prices have generally declined at a faster rate than foreign prices, meaning the potential discount on imported products has been shrinking […]
Prices for all seven of the steelmaking raw materials tracked in this SMU analysis declined over the last 30 days, receding further from record-high levels seen in March and April. Through the latest data available as of July 27, coking coal prices decreased 56% compared to one month prior, pig iron and busheling scrap prices […]
Prices for hot-rolled, cold-rolled and galvanized flat-rolled steel fell again this week with little signs of a near-term bottom. Hot-rolled prices fells into the low $800s per ton ($40s per cwt). Cold-rolled and galvanized base prices, meanwhile, fell into the $1,200s per ton ($60s per cwt) for the first time since mid-March. Spreads between highs […]
On Monday and Tuesday of this week, SMU polled steel buyers on a variety of subjects including steel prices, supply and demand, and new mill capacity. We are sharing some of the comments we received in each buyer’s own words rather than summarizing them in ours. Want to have your voice heard? Contact Brett@SteelMarketUpdate.com to […]
UPI made downward revisions to most of its galvanized coating extras on Monday, with new extras going into effect immediately. Over the last few weeks, Steel Dynamics, NLMK USA, Wheeling-Nippon, and US Steel also revised their coating extras. SMU provides an updated comparison of mill galvanized coating extras in the Resources section of our website, comparing […]
Nucor made downward revisions to most of its galvanized coating extras on Friday, with new extras going into effect Sept. 3, 2022. “Consistent with our practice to monitor the cost of zinc, we have revised our galvanized coating weight extras effective with orders acknowledged for week ending September 3, 2022,” a Nucor press release reads. “Price […]
The number of total active drilling rigs in the US and Canada increased this week, according to data from oilfield services company Baker Hughes. The number of active oil and gas drilling rigs in operation is important to the steel industry because it is a leading indicator of oil country tubular goods (OCTG) demand. The […]
Steel Market Update’s Steel Buyers Sentiment Index fell this week to its lowest level since early August 2020. Our Future Sentiment Index also saw double-digit declines this week, dropping to a near two-year low. SMU surveys steel buyers every other week and asks how they view their chances of success in the current market and […]
The latest SMU Market Survey results are now available on our website to all Premium members. After logging in at SteelMarketUpdate.com, visit the Analysis tab and look under the “Survey Results” section for “Latest Survey Results.” Historical survey results are also available in the Survey Results section under “Survey Results History.” If you need help […]
Once again, nearly nine out of ten steel executives reported that mills are willing to talk price to secure an order, according to buyers polled in this week’s steel market survey. Now standing at a five-month high, this high negotiation rate is similar to what we saw in early July. A high willingness to negotiate […]
Steel mill lead times through this week were relatively flat for sheet products and down slightly for plate, according to SMU’s latest market check. On average this week, lead times declined by 0.1 weeks across the board compared to early July and are down an average of 0.4 weeks compared to one month ago. Having […]
The appeal to import cheaper foreign hot-rolled coil (HRC) instead of domestic steel continues to lessen, according to Steel Market Update’s latest foreign versus domestic price comparison. For the past two months, domestic steel prices have generally declined at a faster rate than foreign prices, meaning the potential discount on imported products has been shrinking. After […]
The spread between hot-rolled coil (HRC) and prime scrap prices is back on the downward trend seen prior to the Russia-Ukraine war, according to Steel Market Update data through this week. The HRC-scrap spread peaked last September, falling to an 18-month low in early March and briefly rebounding through May. The latest spread is nearly […]
SMU’s average hot-rolled coil prices dropped below $900 per ton ($45 per cwt) for the first time since December 2020. And some sources, citing short lead times and spotty demand, said they see little reason for the trend to reverse in the short term. SMU’s hot-rolled coil prices now stand at $875 per ton ($43.75 […]
US Steel made downward revisions to their galvanized and Galvalume coating extras on Monday, with new extras going into effect Sept. 4, 2022. Earlier this month, Steel Dynamics, NLMK USA, and Wheeling-Nippon also revised their galvanized coating extras. SMU provides an updated comparison of mill galvanized coating extras in the Resources section of our website, […]
The Energy Information Administration’s July Short-Term Energy Outlook (STEO) remains subject to a high level of uncertainty, driven by factors such as sanctions affecting Russia’s oil production, the production decisions of OPEC (Organization of the Petroleum Exporting Countries), and the rate at which US producers increase drilling. Due to these variabilities, the EIA continues to […]
SMU canvassed steel buyers on a variety of subjects including steel prices, supply and demand, and new mill capacity on Monday and Tuesday of this week. Rather than summarizing the comments received, we are sharing them in each buyer’s own words. Want to have your voice heard and share your comments with SMU? Contact Brett@SteelMarketUpdate.com […]
Sheet prices continued to slide this week and plate prices to defy gravity. If there is an upside, it’s that the pace of sheet declines has moderated slightly. SMU’s hot-rolled coil price now stands at $910 per ton ($45.50 per cwt), down $45 per ton from $955 per ton a week ago and down $190 […]
Steel Market Update sources reported ferrous scrap prices fell significantly in July, the third consecutive month of declines since peaking in March and April. Prime grades declined as much as $150 per gross ton, while obsolete grades decreased $30-50 per ton. Scrap prices are now in line with levels seen in the first two months […]
Data on US industrial production, capacity utilization, orders and inventories continued to improve through the first half of 2022, indicating a strengthening manufacturing sector. The health of the manufacturing economy has a direct bearing on the health of the steel industry. The Industrial Production (IP) Index The IP index is a gauge of output from […]
Wheeling-Nippon Steel made downward revisions to their galvanized coating extras on Tuesday, with new extras going into effect immediately. Last week, Steel Dynamics and NLMK USA also revised their galvanized coating extras, with their new prices going into effect in August 2022. SMU provides an updated comparison of mill galvanized coating extras here in the […]
US heating and cooling equipment shipments rose 1% from April to May. They now stand at 2.09 million units according to data from the Air Conditioning, Heating, and Refrigeration Institute (AHRI). Recall that two months prior, in March, we saw the third highest monthly shipment rate in our history at 2.28 million units (behind June […]
US apparent steel supply increased 4% from April to May, rising to 9.48 million net tons, according to the latest US Department of Commerce and American Iron and Steel Institute data. Recall that supply reached a six-year high last September at 9.92 million tons, declining each month through February. May’s supply level is now the […]
US steel exports fell 4% in May to 793,000 net tons, further declining from a 45-month high in March, according to the latest US Commerce Department data. On a 12-month moving average (12MMA), May exports have reached a 3+ year record high. Total May exports are 7% higher than levels seen one year ago. As shown […]
The number of total active drilling rigs in the US and Canada increased this week, according to data from oilfield services company Baker Hughes. The number of active oil and gas drilling rigs in operation is important to the steel industry because it is a leading indicator of oil country tubular goods (OCTG) demand. The […]
Sheet steel prices declined last week for the eleventh week in a row, while plate prices have remained relatively stable in comparison, according to SMU’s price indices published last Tuesday. Plate prices typically carry a premium over hot rolled prices because plate is a value-added product and requires more time on the mill. SMU’s hot […]
NLMK USA made mostly downward revisions to their galvanized coating extras this week. The new extras go into effect in August 2022. Earlier this week, Steel Dynamics also revised their galvanized coating extras, with their new prices going into effect August 1, 2022. SMU provides a comparison of mill galvanized coating extras here in the […]
The latest SMU Market Survey results are now available on our website to all Premium members. After logging in at SteelMarketUpdate.com, visit the Analysis tab and look under the “Survey Results” section for “Latest Survey Results.” Historical survey results are also available in the Survey Results section under “Survey Results History.” If you need help […]