Steel Mills
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/media/k2/items/src/6a95680ba8ca5c86252fd0324c85a112.jpg)
Nucor to Commission Gallatin Expansion in June, New Plate Mill on Track
Written by Michael Cowden
April 21, 2022
Nucor expects to complete the $650 million expansion and upgrade of its Gallatin sheet mill in Ghent, Ky., in June, company executives said.
And the Charlotte, N.C.-based steelmaker’s new $1.35 billion plate mill in Brandenburg, Ky. – slated to have annual capacity of 1.2 million tons – remains on track to start up late in the fourth quarter of this year with “meaningful production” in the first quarter of 2023.
“They’ve come through Covid and they’ve come through supply chain issues, and they remain on track for a start up at the end of the year,” Al Behr, executive vice president of plate and structural products, said on an earnings conference call with analysts on Thursday, April 21.
As for Gallatin, Nucor has already commissioned its new electric arc furnace (EAF) and ladle metallurgy furnace (LMF). Its caster and second down coiler will be commissioned in the coming weeks, Nucor president and CEO Leon Topalian said on the same call.
The company will then take a seven-day outage in early June to install Gallatin’s roughing mill and hot mill crop shear. The result: “By June, all of Gallatin’s new capabilities and capacities will be online,” he said.
Recall that Nucor in 2018 announced plans to roughly double Gallatin’s capacity from 1.6 million tons per year to 3 million tons per year. Doing so required adding a second EAF and caster.
Nucor expects to ship approximately 500,000 tons of Gallatin’s new capacity in 2022, with the facility hitting at a run rate of three million tons per year by the third quarter, Topalian said.
Rex Query, executive vice president of sheet and tubular products, said it would be roughly six to seven weeks before Gallatin was fully commissioned. He also said that Gallatin had taken an “extended outage” in December and January following various issues that delayed equipment installation by a matter of months.
And Topalian noted that Gallatin was not alone in taking downtime around the same period. Prices were falling late last year and early in the first quarter of this year, and so Nucor decided to take maintenance outages that had been delayed in 2021 – a period of high steel prices and strong demand.
Nucor also made a conscious decision “not to chase tons” as the market was falling. Prices fell in part because the distribution sector – which usually buys aggressively in January and February – largely sat out of the market amid questions about how far prices might fall and how protracted the downturn might be, he said.
Prices pivoted sharply upward following the war in Ukraine. And now orders from distribution are back – demand that Nucor has the capacity to chase and that could drive spot prices even higher, Topalian said.
Approximately 75% of Nucor’s business on the sheet side is contract based, a much higher percentage than in any of its other product groups. And most of those contracts are based on monthly terms, meaning that higher spot prices will flow into contract prices on a one-month lag. A smaller number of contracts are based on quarterly or more extended terms, he said.
Topalian’s comments came after analysts asked why utilization rates at Nucor’s mills had fallen so much – to 77% in the first quarter of this year from 95% in the first quarter of 2021.
Topalian pointed out that market conditions now are broadly similar to those a year ago. Automotive demand was – and still is – challenged by supply chain problems, notably chip shortages. And energy demand has been “tepid” this year despite sharply higher prices for oil and natural gas. (Last year, oil and gas prices were still low.)
Weakness in those segments has been offset not only from a rebound in demand from service centers but also from continued strong demand from the construction sector, notably for manufacturing facilities and for warehouses, server farms and other physical structures needed to support the digital economy. Another bright spot is physical infrastructure required for electric vehicles, said Chad Utermark, executive vice president of fabricated construction products.
“I think you are going to see – well, I know you are going to see – a significant increase in utilization rates across both our sheet and plate groups,” Topalian said.
By Michael Cowden, Michael@SteelMarketUpdate.com
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/2024/02/SMU_MC_headshot-150x150.png)
Michael Cowden
Read more from Michael CowdenLatest in Steel Mills
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/stelco.png)
Steel Summit 2024: Stelco CEO reflects on strategy, growth, and sale to Cleveland-Cliffs
In a candid fireside chat with SMU Senior Analyst/Editor David Schollert, Stelco’s CEO Alan Kestenbaum opened up about Stelco’s pending sale to Cliffs, his business strategy, outlook for the industry, and plans for the future. The chat took place on Tuesday, Aug. 24, at the 2024 SMU Steel Summit in Atlanta.
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/AISI.png)
AISI: US steel shipments unchanged in July vs. June, down on-year
Domestic steel shipments remained nearly flat in July month over month but fell from a year earlier.
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/white_house.png)
Media reports: Biden could block USS sale on national security concerns
President Joe Biden could block the $15-billion sale of U.S. Steel to Japan's Nippon Steel by citing national security concerns That’s according to reporting in the Washington Post and the Financial Times that was later picked up by the New York Times as well as in wire services.
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/US_Steel.png)
USS threatens to cut ‘thousands’ of jobs, move HQ if Nippon sale blocked
U.S. Steel could slash thousands of jobs, shift away from integrated steelmaking, and move its headquarters out of Pittsburgh if its acquisition by Nippon Steel isn’t completed, the company’s top executive said. “We want elected leaders and other key decision makers to recognize the benefits of the deal was well as the unavoidable consequences if the deal fails,” company President and CEO David Burritt said in a statement on Wednesday.
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/SSAB.png)
CRU: SSAB to expand Mobile plate mill
SSAB plans to spend $12 million to boost production capacity at its electric-arc furnace (EAF) plate mill in Mobile, Ala. The Sweden-based steelmaker will do that by expanding the existing furnace there. Shot blast equipment will also be upgraded. The expanded capacity is expected to come online late next year. The mill currently has an […]