SMU Data and Models
Drill Down of Cold Rolled Imports into Product Detail
Written by Peter Wright
August 20, 2019
Using U.S. International Trade Commission (USITC) data, SMU has taken the import tonnage of cold rolled sheet and broken it down into coil and leveled, then into four thickness ranges, and then identifies how much was full hard, annealed and high strength.
Through June 2019, of the total cold rolled sheet and strip imports into the U.S. only 2.3 percent was strip. By gauge range, the sheet broke down to: 27.0 percent < 0.5mm, 29.8 percent ≥ 0.5 to 1.0 mm, 42.2 percent > 1 to 3mm thick and 1.0 percent > 3 mm.
Table 1 is a summary for 2019 through June of cold rolled imports showing gauge ranges and condition and the annual year-to-date total for sheet. Strip is itemized separately at the bottom of the table.
Figure 1 breaks the year-to-date cold rolled sheet tonnage down into the four gauge ranges that are identified in the HTS codes.
Figure 2 does the same thing for condition. It identifies the volume of full hard, annealed, high strength and high strength annealed. Year-to-date June, 46.7 percent was full hard, 43.7 percent was annealed, 2.1 percent was high strength and 7.5 percent was high strength annealed.
Note: This data was accessed through the USITC database. All steel traded globally is classified by the Harmonized Tariff System (HTS). The HTS code has 10 digits. The first six are globally universal. The last four are used at the discretion of the nations involved in a particular transaction and are the basis of this report. The way the U.S. uses the last four digits to define products may be different from other nations’ product classification.
Peter Wright
Read more from Peter WrightLatest in SMU Data and Models
SMU Survey: Steel Buyers’ Sentiment Indices contrast at year end
Both of our Sentiment Indices remain in positive territory and indicate that steel buyers are optimistic about the success of their businesses.
SMU Survey: Mill lead times contract slightly, remain short
Steel mill production times have seen very little change since September, according to buyers participating in our latest market survey.
SMU Survey: Buyers report mills are slightly less flexible on pricing
Steel buyers of sheet and plate products say mills are still willing to bend on spot pricing this week, though not quite as much as they were two weeks prior, according to our most recent survey data.
December energy market update
Trends in energy prices and active rig counts are leading demand indicators for oil country tubular goods (OCTG), line pipe and other steel products
Apparent steel supply remained near two-year low in October
Referred to as ‘apparent steel supply’, we calculate this volume by combining domestic steel mill shipments with finished US steel imports and deducting total US steel exports.