Steel Markets
US Rig Count Declining Canada Sees Uptick
Written by Brett Linton
May 29, 2015
According to Baker Hughes data from May 29, 2015, the U.S rig count for the week was 875 rigs exploring for or developing oil or natural gas. The last time the active U.S. count was this low was back on January 31, 2003 at 873 rigs.
This week’s total rig count is down 10 rigs when compared to last week, with oil rigs down 13 to 646 rigs, gas rigs up 3 to 225 rigs, and miscellaneous rigs unchanged at 4 rigs. Compared to this time last year, the 875 count is down 991 rigs, with oil rigs down by 890, gas rigs down by 101, and miscellaneous rigs unchanged.
The decline in the drilling of new gas and oil wells is having a direct impact on the amount of line pipe, storage tanks, and OCTG that is being used by the energy sector. A good portion of these products come from hot rolled coil or plate substrate, and are reasons for both the short lead times on hot rolled and plate at North American steel producers and the falling steel prices we have seen going back to mid-2014.
The situation in Canada is just as bad as the U.S. with total rigs down over 50 percent compared to this time last year. The Canadian rig count increased by 26 to 98 rigs this past week, with oil rigs up 20 to 44 rigs and gas rigs up 6 to 54 rigs. Compared to last year the 98 count is a decrease of 100 rigs, with oil rigs down by 61 and gas rigs down by 39. International rigs decreased by 49 to 1,202 rigs for the month of April, a decrease of 147 rigs from the same month one year ago. For a history of both the US and Canadian rig count click here.
About the Rotary Rig Count
A rotary rig is one that rotates the drill pipe from the surface to either drill a new well or sidetracking an existing one. They are drilled to explore for, develop and produce oil or natural gas. The Baker Hughes Rotary Rig count includes only those rigs that are significant consumers of oilfield services and supplies.
The Baker Hughes North American Rotary Rig Count is a weekly census of the number of drilling rigs actively exploring for or developing oil or natural gas in the United States and Canada. Rigs considered active must be on location and drilling. They are considered active from the time they break ground until the time they reach their target depth.
The Baker Hughes International Rotary Rig Count is a monthly census of active drilling rigs exploring for or developing oil or natural gas outside of the United States and Canada. International rigs considered active must be drilling at least 15 days during the month. The Baker Hughes International Rotary Rig Count does not include rigs drilling in Russia or onshore China.
Brett Linton
Read more from Brett LintonLatest in Steel Markets
Latin America’s steel industry grapples with declining demand, rising imports
With climbing imports and falling consumption, the Latin American steel industry has had a challenging 2024, according to an Alacero report.
CRU: Trump tariffs could stimulate steel demand
Now that the dust has settled from the US election, as have the immediate reactions in the equity, bond, and commodity markets, this is a prime opportunity to look at how a second Trump presidency might affect the US steel market.
HVAC shipments slip in September but are still trending higher
Following a strong August, total heating and cooling equipment shipments eased in September to a five-month low, according to the latest data from the Air-Conditioning, Heating, and Refrigeration Institute (AHRI).
GrafTech Q3 loss widens as electrode demand remains soft
GrafTech International’s third-quarter net loss increased from last year, with the company anticipating continuing weakness in near-term demand for graphite electrodes.
Cliffs forecasts 2025 rebound after Q3’s weakest demand since Covid
The negative impact of high interest rates on consumer behavior, particularly in the automotive and housing sectors, was the primary driver of the demand weakness seen across the third quarter, according to Cleveland-Cliffs executives.