By CRU Senior Analyst Ryan McKinley, from CRU’s Steel Sheet Products Monitor, Jan. 26 Steel sheet prices in the U.S. sank by about 9% w/w as they continued to fall towards the global average. CRU’s weekly HR coil assessment in the U.S. was $126 /s.ton lower than the prior week, and high inventory levels relative to […]
Prices for four of the seven steelmaking raw materials tracked in this SMU analysis increased over the last 30 days, while three products decreased. Through Jan. 26, coking coal prices rose 26% from one month prior, aluminum prices increased 10%, iron ore prices rose 8%, and zinc prices were up 2%. In that same time […]
I want to spend some time talking about the Steel Market Update website and the value that can be found there. Over the years we have tweaked and added new content to the site as we strive to provide more information to the industry and our readers. The SMU Website There are a number of […]
I want to spend some time talking about the Steel Market Update website and the value that can be found there. Over the years we have tweaked and added new content to the site as we strive to provide more information to the industry and our readers. The SMU Website There are a number of […]
By CRU Research Analyst James Mills and Multi Commodity Analyst Alex Christopher, Jan. 6 The synchronized rise in commodity prices in 2021 prompted some market commentators to speculate the beginnings of a “supercycle.” At CRU, we are more cautious. In the past year, commodity prices have been more volatile than in the preceding years, with […]
Steel prices declined for the fourth consecutive month in December, following a year-long streak of continuous price increases. Hot-rolled coil prices declined $130 per ton throughout the month, with the SMU index averaging $1,600 per ton ($80.00 per cwt) as of Tuesday, Dec. 21 (SMU did not published updated prices on Dec. 28). The SMU Price Momentum […]
Steel Market Update is pleased to share this Premium content with Executive members. For information on upgrading to a Premium-level subscription, email Info@SteelMarketUpdate.com. Prices for three of the seven steelmaking raw materials tracked in this SMU analysis increased over the last 30 days, while three products decreased and one was unchanged. Through Dec. 21, iron ore prices […]
The Commerce Department has declined to initiate a duty-circumvention case filed by Steel Dynamics Inc. (SDI) against Vietnamese coated flat-rolled steel made from Japanese substrate The decision came on the heels of opposition from big foreign mills, major steel importers and exporters, as well as lobbying groups in Japan and Vietnam. “Commerce finds that SDI did […]
By CRU Principal Analyst Josh Spoores, from CRU’s Steel Monitor, Dec. 15 Seasonal pressures are starting to temporarily slow demand for some steel products. For sheet, this weakness is adding to a monumental shift in supply fundamentals. For other products, an unseasonably warm start to December has allowed construction demand to remain stronger than normal. […]
U.S. Steel has released updated galvanized steel coating extras, with new prices going into effect on Jan. 2, 2022. Other mills have also adjusted their coating extras due to rising zinc costs in recent months; NLMK, Big River Steel, and Nucor all have revised extras going into effect in January 2022, and ArcelorMittal USA and […]
Late last week both Nucor and Big River Steel notified customers of an upward revision to their galvanized steel coating extras. A letter from Nucor stated, “Consistent with our practice to monitor the cost of zinc, we have revised our galvanized coating weight extras effective with orders acknowledged for the week ending Jan. 8, 2022.” […]
Nucor and Big River Steel have joined the ranks of sheet mills announcing new coating extras for 2022. “Consistent with our practice to monitor the cost of zinc, we have revised our galvanized coating weight extras,” Charlotte, N.C.-based Nucor said in a letter to customers on Wednesday, Dec. 1. The new coating extras will be […]
By CRU Analyst Tanya Bhaiji, from CRU’s Steel Sheet Products Monitor, Nov. 29 Galvanized sheet is the biggest first use for refined zinc, constituting around 30% of total refined zinc demand in 2020. The majority of galvanized sheet is consumed in end-use sectors such as construction and automotive while a smaller percentage is also consumed in […]
Steel prices declined for the third consecutive month in November, following a 12-month streak of continuous price increases. Hot-rolled coil prices declined $105 per ton throughout the month, with the SMU index averaging $1,770 per ton ($88.50 per cwt) as of Tuesday, Nov. 30. The SMU Price Momentum Indicator for hot-rolled coil was adjusted from Neutral […]
Prices for four of the seven steelmaking raw materials tracked in this SMU analysis declined over the last 30 days. Through Nov. 18, iron ore prices fell 27% from one month prior, aluminum prices are down 17%, zinc prices declined 15%, and coking coal prices decreased 4%. In that same time frame, shredded scrap prices […]
Steel buyers are “confused” as are some traders as to what deals are being offered into the hot rolled market right now. Steel Market Update has been advised by a couple of large HRC buyers of offers below $1,600 per ton ($80.00/cwt), while at the same time we have spoken to buyers who continue to […]
Steel buyers are “confused” as are some traders as to what deals are being offered into the hot rolled market right now. Steel Market Update has been advised by a couple of large HRC buyers of offers below $1,600 per ton ($80.00/cwt), while at the same time we have spoken to buyers who continue to […]
On Monday, Nov. 8, NLMK notified customers of an upward revision to their galvanized steel coating extras, effective on orders starting January 2022. Zinc prices soared in October, reaching a record high of $1.74 per pound on Oct. 15. Prices have since declined, down to $1.48 per pound as of Nov. 9. Recall that the last round of […]
October saw a gradual decline in steel prices for the second consecutive month, following one full year of continuous price increases. Hot rolled steel prices decreased $45 per ton throughout the month, with the SMU index averaging $1,885 per ton ($94.25 per cwt) as of Tuesday, Oct. 26. The SMU Price Momentum Indicator for hot […]
Domestic mills plan to announce higher zinc coating extras as soon as this week, according to market participants. The higher coating extras would be effective Jan. 1, 2022, they said. At least two domestic mills have also confirmed that extras will move higher. Zinc is used to make galvanized products. It prevents rust. Zinc prices […]
By CRU Analyst Helen O’Cleary, from CRU’s Zinc Monitor Zinc’s price started LME Week looking mildly bullish on short covering, with the 3-month official price settling at $3,246 /t on Oct. 12. By Oct. 15, it had reached $3,944 /t, turbocharged by news of smelter cutbacks in Europe due to soaring energy prices and the […]
By CRU Research Manager Eoin Dinsmore, from CRU’s January Zinc Monitor Buyers who are unfortunate enough to find themselves in the spot market are paying 18-23¢ /lb for SGH zinc. The most recent deals have all been at 20¢ /lb or higher. Buyers are fearful of being left short metal, while suppliers are either sold […]
Prices for four of the seven steelmaking raw materials tracked in this SMU analysis increased over the last 30 days. Through Oct. 20, zinc prices shot up 24% over one month prior, iron ore prices rebounded 18% in one month’s time, aluminum prices rose 9%, and coking coal prices increased 8%. In that same time […]
Editor’s note: SMU contributor Bryan Tice is a partner at Metal Edge Partners, a firm engaged in Risk Management and Strategic Advisory. In this role, he and the firm design and execute risk management strategies for clients along with providing process and analytical support. Before joining Metal Edge Partners, Bryan held a variety of commercial […]
Steel prices gradually declined through the month of September, following one full year of increasing prices. Hot rolled steel prices decreased $35 per ton ($1.75 per cwt) throughout the month, with the SMU index averaging $1,920 per ton ($96.00 per cwt) as of last Tuesday. The SMU Price Momentum Indicator was adjusted to neutral the […]
By CRU Senior Analyst Helen O’Cleary, from CRU’s Steel Sheet Products Monitor CRU recently developed a bottom-up zinc demand model to improve our medium-term demand forecasts. The model calculates demand in key regions and countries for the six major first uses of refined zinc: galvanized sheet, general galvanizing, copper-zinc alloys, die casting alloys, zinc oxide […]
Prices for four of the seven steelmaking raw materials tracked in this SMU analysis decreased over the last 30 days. Through Sept. 17, iron ore prices stumbled 21% in one month’s time, busheling scrap prices declined 12%, pig iron prices fell 11%, and shredded scrap prices declined 3%. Coking coal prices jumped 49% in that […]
Prices for four of the seven steelmaking raw materials tracked in this SMU analysis decreased over the last 30 days. Through Sept. 1st, iron ore prices stumbled 18% in one month’s time, pig iron prices fell 11%, shredded scrap prices declined 4%, and zinc prices decreased 2%. Busheling scrap prices remained flat month over month, while aluminum prices rose […]
Steel prices continued to climb through the month of August, marking one full year of increasing prices. Hot rolled steel prices increased $45 per ton ($2.25 per cwt) throughout the month, with the SMU index averaging $1,935 per ton ($96.75 per cwt) as of Tuesday. The SMU Price Momentum Indicator remains unchanged since the August 2020 adjustment to higher, indicating prices […]
By CRU Senior Analyst Helen O’Cleary, from CRU’s Steel Sheet Products Monitor The automotive industry accounts for approximately 10% of end-use sector zinc demand, in the form of galvanized steel sheet, die castings and oxide. Even before the pandemic, vehicle output and sales in some of the major producing countries were being constrained by new […]