This is Steel Market Update’s first Key Market Indicators report since April as we have renegotiated some data supply contracts and made a few changes to the content. The report still summarizes 36 data streams that we believe critically describe the state of the steel market and provide forward guidance to steel buyers. Data released […]
Steel Market Update is sharing this Premium content with Executive-level readers. For more information about upgrading to a Premium-level subscription, email Info@SteelMarketUpdate.com. Key market indicators in December were at an all-time high in the history of Steel Market Update’s analysis, but trends are deteriorating. This report summarizes 36 data streams that we believe critically describe […]
The prices of scrap and iron ore advanced in April, but coking coal and zinc declined. To put the raw materials analysis into perspective, Figure 1 shows the spread between Chicago #1 busheling and hot rolled coil ex works Indiana through April 13, both in dollars per net ton. The spread at $538.50 is now […]
Materials Science Corporation has completed an electro-galvanizing expansion for coating ultra-high-strength steels at its East Chicago, Ind., manufacturing operation. “The use of ultra-high-strength steels in automotive applications continues to grow, and many of those applications require zinc coating for corrosion protection. Our line in East Chicago specializes in coating all grades and sizes of UHSS […]
The high price of galvanized steel has not dampened demand, at least not yet, say distributors of HVAC products, who report continued strong market conditions. “The market is somewhat back to normal, just at dramatically higher transaction prices,” commented one member of the Heating, Air-conditioning, and Refrigeration Distributors International (HARDI), during the trade group’s monthly […]
The high price of galvanized steel has not dampened demand, at least not yet, say distributors of HVAC products, who report continued strong market conditions. “The market is somewhat back to normal, just at dramatically higher transaction prices,” commented one member of the Heating, Air-conditioning, and Refrigeration Distributors International (HARDI), during the trade group’s monthly […]
Flat rolled and plate steel prices were mixed this past week. Benchmark hot rolled price averages ranged from a low of $854 per ton (SteelBenchmarker) to a high of $882 per ton (Platts) with Steel Market Update reporting our average last week as $870 per ton, unchanged from the week prior. Cold rolled averages ranged […]
Trying to predict the price of a metal is an exercise in futility, but MetalMiner strives to provide metal buying organizations with clarity around when and how much to buy, says Lisa Reisman, MetalMiner Executive Editor. Reisman will make another appearance at Steel Market Update’s 2018 Steel Summit Conference, set for Aug. 27-29 at the […]
Steel Market Update has been diligently working toward completing our SMU Steel Summit Conference agenda. We have been intentionally taking our time as we wait for market developments to mature and provide guidance as to what subjects will be the most pressing to the manufacturing companies, fabricators, steel distributors, steel mills, trading companies, toll processors […]
Steel Market Update has been diligently working toward completing our SMU Steel Summit Conference agenda. We have been intentionally taking our time as we wait for market developments to mature and provide guidance as to what subjects will be the most pressing to the manufacturing companies, fabricators, steel distributors, steel mills, trading companies, toll processors […]
Key market indicators tracked by Steel Market Update in March remain very positive, but took a small step back from the all-time highs reported in February. Data released in March shows that 18 of the 36 indicators are historically positive with only 5 negative. The balance is within the band of historically normal. Trends deteriorated […]
Scrap and coking coal prices advanced in March. Iron ore and zinc declined. To put the raw materials analysis into perspective, we include here Figure 1, which shows the spread between Chicago #1 busheling and hot rolled coil ex works Indiana through March 9, both in dollars per net ton. March was the first time […]
Scrap, iron ore and zinc prices advanced in February, while the price of coking coal has declined by $4 per ton since mid-January. To put the raw materials analysis into perspective, Figure 1 shows the spread between Chicago #1 busheling and hot rolled coil ex works Indiana through Feb. 9, both in dollars per net […]
When the pressure begins, and the cooking surface gets “hot,” that is when you have to be at your best, most nimble and anticipate problems. USS/POSCO announced new prices late yesterday. We have not heard from California Steel Industries (CSI) on what they are going to do regarding pricing. We have heard from their customers […]
Distributors of galvanized steel products to the HVAC industry are concerned that steel prices could experience a correction once President Trump finally announces his decision on Section 232. “I fear that a lot of 232 is already built into the pricing, and if the [trade action] is less than people were expecting, we could see […]
It is not enough to know a steel mill’s base price. When doing a comparison of galvanized transaction pricing, a steel buyer must understand the extras being added to the base price as well as freight and other considerations that could impact the total delivered cost to your facility. During our Steel 101 workshop we […]
Industry data through the end January, including drivers of steel prices, supply and demand, are all pointing up as the year got off to a strong start. As the month ended, the Steel Market Update (SMU) Price Momentum indicator was pointing to higher flat rolled steel prices over the next 30 to 60 days as […]
Of the four raw materials tracked by Steel Market Update, scrap and zinc prices advanced in January, iron ore took a small step back and coking coal declined by 10 percent. Each January, Bloomberg and U.S. Global Investors compile their Periodic Table of Commodity Returns. Figure 1 shows the returns of commodities each year of […]
The steel community was probably disappointed this evening when President Trump failed to mention anything about the Section 232 investigation that has been hanging over the heads of the industry for one year. We will all need to wait to see if the president will do anything on the subject of steel and aluminum imports. […]
Demand is good heading into 2018, mill prices are on the upswing and trade cases promise to keep low-priced imports at bay. So why aren’t distributors who sell galvanized steel products to the HVAC market happier? Members of the Heating, Air-conditioning, and Refrigeration Distributors International (HARDI) reported that market conditions remain highly competitive despite price […]
As we collected hot rolled, cold rolled, galvanized, Galvalume and plate prices earlier this week, we asked a number of questions trying to get reactions from the steel buyers. We asked how high steel prices could go (using hot rolled as the benchmark) and what were the key drivers affecting prices right now. Here are […]
Zinc reached a 10-year high on Thursday, closing at $3,364 per metric ton on the London Metal Exchange. Zinc, used for galvanizing metals, has nearly doubled in price over the past two years as supplies have tightened. At the same time, demand has increased. Chinese demand grew by 2.1 percent last year, and U.S. demand […]
Key market indicators bode well for business conditions in the first quarter of 2018. Steel Market Update’s view of the present situation based on our examination of data released in December shows that 47.2 percent of the 36 indicators are historically positive with only 19 percent negative. The balance is within the historically normal band. […]
All four raw materials tracked by Steel Market Update— iron ore, scrap, coking coal and zinc—increased in price in December. From Australia News Digest on Dec.18: “Steelmaking raw materials made strong gains on Monday as Chinese mills, responsible for half the world’s steel output, restock ahead of the resumption of full production at the end […]
The following industry data, current through the end of the month of December 2017, covers a number of important indices and drivers of steel prices, as well as supply and demand. As the month ended, the Steel Market Update (SMU) Price Momentum indicator was referencing higher flat rolled steel prices over the next 30 to […]
The year 2017 proved a bit “odd” as the threat of political action against foreign steel worked against the domestic steel mills. Early in the year, newly crowned President Trump authorized the U.S. Department of Commerce, led by former steel magnate Wilbur Ross, to investigate if the steel industry is essential to the U.S. for […]
Current and future sentiment among flat rolled steel buyers improved further in December, according to the Steel Market Update Steel Buyers Sentiment Index, mirroring the pattern at this time last year that heralded a strong first quarter. The SMU Steel Buyers Sentiment Index measures changes in buyers’ optimism levels, which offers insight into their likely […]
More than nine out of 10 respondents to Steel Market Update’s latest market trends questionnaire see steel prices heading higher in the first quarter. Seven percent say they see no clear direction for prices. Virtually no one expects prices to decline in the wake of price hike announcements by the major mills earlier this month. […]
Service centers continue to hold flat rolled inventories steady at 2.89 months of supply at the end of November, according to the proprietary Steel Market Update Service Center Inventories Index (SSII). This is now the third consecutive month we have found flat rolled steel distributors’ inventories close to the three months of supply level. Contrast […]
On the heels of its $50 per ton increase on carbon plate prices on Wednesday, Nucor announced an additional $30 per ton increase on hot rolled, cold rolled and galvanized steel products on Friday, effective immediately. U.S. Steel, NLMK USA and California Steel matched the Nucor sheet price increase of $30 per ton. ArcelorMittal USA, […]