The fifth round of NAFTA negotiations will be Nov. 17-21 in Mexico City, but contentious U.S. proposals are making a compromise between the three trading partners problematic. The U.S. has proposed a sunset clause, rules of origin tipped in favor of the U.S., restrictions on government procurement and elimination of dispute settlement mechanisms, none of […]
Nearly as disturbing as the steel imports themselves are repeated delays in promised trade relief, say steel industry executives, who find themselves doing business in a state of “perpetual uncertainty.” While there is no official confirmation from the Department of Commerce, SMU’s sources have confirmed reports that the Commerce Department has again delayed a preliminary […]
SMU published an article in Tuesday evening’s issue about the comments made by General John Adams on national security and the need for steel. The title of the article was “General Goes Nuclear in Support of Section 232.” We received a number of comments from that article wanting to know if we had fact-checked what […]
Buyers and sellers of flat rolled steel continue to be optimistic about their company’s ability to be successful in the current market environment as well as three to six months into the future. We are seeing signs of what has become a normal mild tapering of enthusiasm as we enter the fourth quarter of the […]
Despite the major flat rolled trade cases concluded in 2016, flat rolled steel imports continue to surge. Coated imports are at their highest levels ever and cold rolled imports are near record levels. This article, by Paul Lowrey of Steel Research Associates, provides some historical context to the current situation. This analysis includes all products […]
Last Friday, the U.S. International Trade Commission ruled that the domestic solar industry has been seriously injured by imports of cheap, foreign-made solar cells. The case was brought by solar panel makers Suniva and SolarWorld under Section 201 of the Trade Act of 1974. The ITC now has until Nov. 13 to make recommendations to […]
Both Current and Future Sentiment showed a slight decline as a single data point in the latest SMU Steel Buyers Sentiment Index, based on data gathered in mid-September. The index measures how buyers and sellers of flat rolled steel feel about their company’s ability to be successful both in the current market environment, as well […]
Nucor expects earnings to be lower in third quarter compared to second quarter. Although Nucor sheet mills are operating at high utilization rates, pricing is not keeping pace with raw material costs due to pressure from imports. Plate demand has been tepid in end-use markets following a restocking of inventory in the supply chain earlier […]
Steel Market Update asked four panelists at the 2018 Steel Summit to define free and fair trade and offer some solutions to what most in the industry consider unfairly traded steel imports. Philip Bell, president of the Steel Manufacturers Association representing North American EAF steel producers, said there are five components of free and fair […]
How can domestic mills expect to increase prices when their lead times are so short and foreign steel is still so plentiful? In the monthly steel conference call hosted today by the Heating, Air-conditioning, and Refrigeration Distributors International, HARDI members commented on the contradictions in mill behavior that have left them confused and concerned about […]
In their pursuit of free and fair trade, U.S. steelmakers are often called protectionist—a label they increasingly resent. Steel industry trade groups, including the American Iron and Steel Institute and the Steel Manufacturers Association, have urged the Trump administration to take a harder stance on steel imports. Trade action, including new tariffs or quotas under […]
In their pursuit of free and fair trade, U.S. steelmakers are often called protectionist—a label they increasingly resent. Steel industry trade groups, including the American Iron and Steel Institute and the Steel Manufacturers Association, have urged the Trump administration to take a harder stance on steel imports. Trade action, including new tariffs or quotas under […]
Responses to two questions in Steel Market Update’s latest flat roll market trends analysis elicited a clear consensus from our participants: The Trump administration’s delay in acting on Section 232 could open the door to more foreign steel imports. But the government should not necessarily penalize foreign countries just because they export a high rate […]
Gilbert Kaplan, nominee for undersecretary for international trade at the Department of Commerce, was questioned today by the Senate Finance Committee on how he will approach trade issues for the nation. As undersecretary, Kaplan would be responsible for promoting U.S. trade and enforcing trade laws. Sen. Sherrod Brown (D-OH) pressed Kaplan on whether he supported […]
I had to smile on Friday when Brett in my office forwarded an email to me from one of the steel mills. Here is part of what this mill executive had to say: “I occasionally write to John just to vent. It doesn’t help him, but it makes me feel better. Section 232 is the […]
Foreign steel imports continue to trend well over the 3.0 million net tons mark as steel buyers placed heavy tonnage once the Section 232 investigation was announced in March (March orders = June/July delivery). The U.S. Department of Commerce (DOC) released preliminary census for June and license data for July earlier this evening. According to […]
Cliffs Natural Resources is psyched to begin construction on its HBI facility. The company is currently in discussions with potential financial partners that align with Cliffs’ strategy for growth. CEO Lorenzo Goncalves says a financial partner for a $700 million private investment is not necessary to move the project forward, but would be nice to […]
AK Steel is looking for a broad application of Section 232 that will address the continued increase in unfairly traded imports. CEO Roger Newport said during the second-quarter earnings conference call that trade cases are not working the way they were designed and hopefully Section 232 will address loopholes and those who figure out how […]
The American steel industry is facing a crisis that endangers U.S. national security, and it’s time for decisive action, says Philip Bell, president of the Steel Manufacturers Association in Washington, which represents the interests of EAF steel producers in the U.S. In the pending Section 232 investigation, SMA is advocating strongly for a new steel […]
Nucor CEO John Ferriola said that in the current challenging environment, he is encouraged by second-quarter results, but not satisfied. Illegally traded imports continue to be a problem in the United States for Nucor and the domestic steel industry, Ferriola said during the company’s second-quarter conference call. He cited a 15 percent year-over-year increase in […]
The European steel market and economy improved in the first half of 2017, but the EU is concerned that increasing protectionist policies may lead to “disastrous trade flow distortions.” Apparent steel consumption grew 3.1 percent year-over-year in the European Union during the first quarter of 2017, according to a new report by the European Steel […]
Steel Market Update (SMU) Publisher John Packard and Executive Editor Tim Triplett were in New York City over the past two days meeting with manufacturing companies, service centers, steel mills, trading companies and members of the financial community associated with the steel industry. We found the first words off of everyone’s lips were “what do you think […]
The steel industry has a way of surprising those who use its products. This may be especially true this year as it appears the industry is about to enter a phase not seen in decades. It is mid-June 2017 and the domestic flat rolled steel mills are raising steel prices as the U.S. Department of […]
Ships, barges, trains and trucks move the nation’s cargo. Here is this month’s look at shipping conditions by various modes. Seaborne Freight Rates have dropped in the dry bulk market recently, but may now be plateauing, according to the latest report by MID-SHIP Group. Fleet expansion was strong during the first half of 2017, growing […]
The Section 232 Investigation of steel imports on national security hearing was held on Tuesday. The testimonies included four representatives of foreign governments: China, Russia, the European Union, and Ukraine. Not surprising, none were in support of new import restrictions by a Section 232 action. China was represented by Yu Gu, First Secretary of the […]
I have read reports that suggest the first fully integrated mill in Vietnam, Formosa Ha Tinh Steel, has received permission to test their #1 blast furnace. The Vietnamese government has approved the pollution control equipment and the company is going to be allowed to run the blast furnace on a six-month trial period. In July […]
US Steel announced on Wednesday that Mario Longhi has stepped down as CEO of US Steel Corp. As of May 8, 2017, president and chief operating officer David Burritt will take the reins as chief executive officer. Longhi will remain on the board of directors and as an employee of US Steel, providing transitional support, […]
China’s Ministry of Commerce called the initiation by the U.S. of antidumping investigations on imports of cold-drawn steel mechanical tubing from China and five other countries “excessive,” in comments made on Thursday. Wang Hejun, head of the trade remedy and investigation bureau, said he was concerned over rising protectionism from the United States. “Under excessive […]
Lately, Steel Market Update (SMU) has been hearing the word “risk” bantered about by many within the steel industry. In Steel Market Update’s opinion, how one perceives the risks associated with buy and sell decisions is one of the factors determining the direction of flat rolled steel prices. which at this time are moving lower. […]
My “final thoughts” is an area of the newsletter where I can provide some of my opinions on a wide range of topics, provide information or updates on our workshops and conference or provide late-breaking tidbits from around the world that come in late in the day and are unable to make it into a […]