Tag: Ternium

While Ternium is expecting an increase in shipments in the current quarter, a decrease in earnings is also anticipated due to lower international steel prices and higher unit costs.

Mexican steelmaker Ternium could benefit if the US places new steel tariffs on Mexico, according to New York-based investment firm Morgan Stanley. “First, if the US were to levy tariffs on steel imports from Mexico, we believe the government of Mexico would likely respond with a similar measure. Second, due to its product mix, Ternium would likely benefit […]

Mexican steelmaker Ternium could benefit if the US places new steel tariffs on Mexico, according to New York-based investment firm Morgan Stanley. “First, if the US were to levy tariffs on steel imports from Mexico, we believe the government of Mexico would likely respond with a similar measure. Second, due to its product mix, Ternium would likely benefit […]

Ternium and Tenaris have upped their stake in Brazilian steelmaker Usinas Siderúrgicas de Minas Gerais S.A. (Usiminas). Ternium’s Brazilian subsidiary Confab Industrial S.A., Ternium Investments, and Ternium Argentina, collectively known as the T/T group within the controlling group of Usiminas, closed on a previously announced acquisition of 68.7 million ordinary shares of Usiminas. The shares […]

Ternium announced this week that its new slab mill will be built in Pesquería, Nuevo León, Mexico. The Luxembourg-based Latin American steelmaker had said earlier this year it would build an electric-arc furnace (EAF) and direct-reduced iron (DRI) facility in North America. Brownsville, Texas, had been rumored to be in the running for the new […]

SMU’s Steel Summit Conference 2023 is two months away, and it’s never too early for attendees and prospective attendees to start preparing for how to take advantage of the conference’s resources. CRU principal analyst Josh Spoores sat down with SMU managing editor Michael Cowden and senior analyst David Schollaert on Tuesday for a webinar in […]

We are counting down the days until SMU’s Steel Summit Conference on Monday-Wednesday, Aug. 21-23, in Atlanta. It’s only a little over two months away. Approximately 755 people have already registered. Our discounted room blocks are almost gone. Register here. The event will again be held at the Georgia International Convention Center, a massive conference center in close […]

Mexico is benefiting from the trend of the reshoring of manufacturing as companies work to secure reliable supply chains and be closer to their end markets. As a result, Ternium’s Mexican operations are seeing increasing shipments and market share. Company executives discussed this and other topics on the company’s first-quarter earnings conference call on Wednesday, […]

As you make your travel plans for this summer, don’t forget about this year’s Steel Summit Conference in Atlanta. The event will again be held at the Georgia International Convention Center, a world-class conference facility adjacent to the Hartsfield-Jackson Atlanta International Airport—think low airfares and easy access. So mark your calendar for Monday-Wednesday, Aug. 21-23. The […]

Despite high interest rates dampening demand, strength in manufacturing across the globe will drive a rebound in steel demand this year, the World Steel Association (worldsteel) said in its April 2023 Short Range Outlook. “In 2022, recovery momentum after the pandemic shock was hampered by high inflation and increasing interest rates, the Russian invasion of […]

Ternium SA and its affiliates aim to take a majority stake in Brazilian flat-rolled steelmaker Usinas Siderúrgicas de Minas Gerais SA (Usiminas). The Latin American flat-rolled steelmaker said it and related companies had agreed to pay $111 million in cash for 57.7 million in ordinary shares of Usiminas. The shares will be purchased from Japan’s […]

The steel industry in the US, and across much of the developed world, finds itself between two greens. On the one hand is the constant innovation towards sustainable, decarbonized “green” steel. And, on the other, is a more traditional green, the bottom line: money. The hope is to keep the two aligned, increasing profits while […]

Mexico has historically relied on steel sheet product imports to meet its demand as domestic suppliers, such as Ternium and AHMSA, had insufficient production capacity. But, in recent years, both Ternium and ArcelorMittal have built new capacities for hot-rolled (HR) coil in Mexico. Ternium is also in the process of building more downstream capacity and […]

Sometimes it’s hard to know who your friends are. What starts offs as a simple disagreement escalates. Things can soon spin out of control. And that’s just for people. When dealing with nation states like the US and Mexico, things get a bit more complex, and the stakes a whole lot higher. At the beginning […]

Ternium plans to spend $2.2 billion to build an electric-arc furnace (EAF) and direct-reduced iron (DRI) module in North America. The Latin American steelmaker said the EAF would have capacity of 2.86 million short tons (2.6 million metric tons) per year and that the DRI unit would have capacity of 2.31 million short tons (2.1 […]

Ternium recorded narrower profits in the fourth quarter on lower steel prices and higher costs. The Luxembourg-based steelmaker, which operates primarily in Latin America, said it expected results to improve in 2023, echoing the comments of its competitors in their recent earnings releases. Ternium’s earnings financial results are in the table to the left. The […]

Ternium Mexico president César A. Jiménez sees the company’s investment in Pesquería, outside of Monterrey, as an opportunity to replace imports with steel produced in Mexico. Jiménez sat down with SMU managing editor Michael Cowden at SMU’s Tampa Steel Conference for a Fireside Chat. Beyond Pesquería, he gave his thoughts on a range of topics, […]

I am writing these Final Thoughts from an exhibition hall at Tampa Marriot Water Street hotel, where we just wrapped up the Tampa Steel Conference. The table I’m writing from is about to be taken down and packed up, and I have to get to the airport soon – so forgive me for what tonight […]

We’re less than two weeks away from the Tampa Steel Conference. It’s not too late to register, but you should do it ASAP. The event will be at the Tampa Marriott Water Street hotel on Sunday-Tuesday Feb. 5-7. Approximately 445 people have already registered, which is more than total attendance last year. New companies are being added […]

We’re less than two weeks away from the Tampa Steel Conference. It’s not too late to register, but you should do it ASAP. The event will be at the Tampa Marriott Water Street hotel on Sunday-Tuesday Feb. 5-7. Approximately 430 people have already registered, which is more than total attendace last year. We expect that number to […]

We’re less than one month away from the Tampa Steel Conference. The event will be at the Tampa Marriott Water Street hotel again, so mark your calendar for Sunday-Tuesday, Feb. 5-7. There are nearly 375 attendees registered, and the list is growing daily. Keep in mind that this is the high season for tourism in Florida, and […]

The new year is off to a great start, and there’s still time to register for the Tampa Steel Conference as you make your travel plans for 2023. The event will be at the Tampa Marriott Water Street hotel again, so mark your calendar for Sunday-Tuesday, Feb. 5-7. Nearly 300 of you have registered already. We’re on track […]

Ternium has named international technology group Andritz to build its new high-end push pickling line (PPL) near Monterrey, Mexico.  The new line in Pesquería will have an annual capacity of approximately 600,000 tons, and will be used mainly for the automotive and home appliance industry, Andritz said. The company added that the line is designed […]

We’re nearing the end of 2022, which means it’s time to register for the Tampa Steel Conference as you make your travel plans for 2023. The event will be at the Tampa Marriott Water Street hotel again this year. Mark your calendar for Sunday-Tuesday Feb. 5-7. Nearly 200 of you have registered already. We’re on track […]

We’re nearing the end of 2022, which means it’s time to register for the Tampa Steel Conference as you make your travel plans for 2023. The event will be at the Tampa Marriott Water Street hotel again this year. Mark your calendar for Sunday-Tuesday Feb. 5-7. Nearly 200 of you have registered already. We’re on track […]

The Tampa Steel Conference – which SMU does every February together with the Port of Tampa Bay – offers the tantalizing prospect for those of us in the Midwest of getting out of the cold to network outdoors in Florida. We’ll again hold the conference at the Tampa Marriot Water Street hotel. We’ve got a solid agenda […]

Latin American steelmaker Ternium saw a big earnings drop in the third quarter but remains upbeat on its position in and the fundamentals of the North American markets, according to the company’s Q3 earnings report and conference call with analysts on Thursday, Oct. 3. The Luxembourg-based company’s Q3 net income declined substantially, falling 84% year-on-year […]

Ternium executives provided an update on the company’s new Pesquería hot strip mill and plans for a greenfield electric-arc furnace in North America on the company’s second quarter earnings conference call on Wednesday, August 3. Weak demand and falling prices are impacting the company, but it remains positive on its plans moving forward. Updates on […]

As it reported strong second quarter results, Ternium said it expects falling steel prices and high raw materials costs to negatively impact the third quarter. The current “significant” declines in steel prices are due to the normalization of the global steel market after Russia’s invasion of Ukraine in February of this year. They are also the […]

Is this a case of the summer doldrums or something more serious? That might be a more important question to answer than where the bottom is and when we might hit it. But first let’s start with a recap of where prices landed this week. SMU’s hot-rolled coil price is now at $955 per ton ($47.75 […]