Tag: steel

Former U.S. Steel executive Kenneth Jaycox is moving from steel to the automotive parts industry.

When we last talked to Jared Rowe in May, he had just been appointed Reibus International's new CEO and chairman of the board. Now two months into the job, SMU caught up with him on our July 24 Community Chat for the latest on the online metals marketplace.

Domestic raw steel production eased last week following a seven-week high, according to the latest release by the American Iron and Steel Institute (AISI).

Japan’s Nippon Steel announced it was withdrawing from a joint venture (JV) with China's Baoshan Iron & Steel (Baosteel) that served the Chinese automotive industry.

Nearly 1,200 people have registered for SMU Steel Summit, which is less than a month away now. That means we’re still on pace to meet or exceed last year’s record attendance despite a tough flat-rolled steel market over the last few months. So, a big thank you to everyone who already plans to go for your continued support. If you haven’t booked travel yet, don’t miss out on one of the greatest shows in steel – register here. (You can also check out the latest agenda here.)

Six steel industry organizations have urged House Speaker Mike Johnson to include the Leveling the Playing Field 2.0 Act in any proposed package of legislation against China’s "unfair" trade practices.

GrafTech cited a “challenging” part of the business cycle as its net loss widened in the second quarter.

Drilling activity rose in both the US and Canada last week, according to the latest data release from Baker Hughes. US rig activity increased to a six-week high but remains near multi-year lows. Canadian counts continue to improve, now at a 20-week high.

Both iron ore and coking coal prices fell this week because of resistance from buyers. Iron ore prices have continued to fall throughout the past week, following sharp declines in steel prices in China, given no new policy announcement from the ‘Third Plenum’ meeting.

The prices for the July market weren’t settled until July 8 and now we are approaching the formation of the August market.

Cleveland-Cliffs announced on Friday that it would seek $670 per short ton (st) for hot-rolled (HR) coil. The steelmaker said the move was effectively immediately. It coincides with the opening of the company’s HR order book for September.

SMU has heard from some larger buyers who have stepped back into the market to buy at prices that, if not at a bottom, they assess to be close to one. Is it enough to stretch out lead times and send prices upward again? Or do we continue to scrape along the mid-$600s per short ton (st) as we have been doing for most of the last month?

Summer is here, and a familiar sentiment has hit the hot-rolled coil (HRC) futures market. Prices continue to decline in both the spot market and the futures market, with expectations of sub-$800 prices for the remainder of the year.

Reliance Inc. said a faster-than-expected decline in carbon steel prices offset higher shipments in the second quarter.

The majority of steelmaking raw material prices declined in June, following the same trend seen in May, according to SMU’s latest analysis.

Nucor has lowered the 2024 production estimate for its Brandenburg, Ky., plate mill due to soft market conditions.

Galvanized prices have fallen precipitously from a month ago, though many market participants think a bottom is in sight.

SSAB said lower plate prices in the US were the primary reason for reduced results in the second quarter. With a dismal Q3 outlook, the Swedish steelmaker is adjusting production across its facilities. That includes moving up its annual US mill outage in anticipation of a better Q4. SSAB Americas Revenues in the Americas segment […]

High levels of steel imports, especially from China, in recent months are worrying steel makers in India and Vietnam.

Nucor’s top executive expressed concerns over unfair trade practices, highlighting increased steel imports from Mexico and Canada.

On Monday and Tuesday of this week, SMU polled steel buyers on an array of topics, ranging from market prices, demand, and inventories to imports and evolving market events.

Cleveland-Cliffs Chairman, President and CEO Lourenco Goncalves had some insightful things to say today about the steel market and about a conference we suspect might be Steel Summit.

Cleveland-Cliffs expects its acquisition of Canada’s Stelco to close later this year, which will help the the Cleveland-based steelmaker as a bottom to steel tags nears.

Global steel output eased 2% in June following May’s 14-month high, according to World Steel Association’s (worldsteel) latest release.

SMU’s Key Market Indicators include data on the economy, raw materials, manufacturing, construction, and steel sheet and long products. They offer a snapshot of current sentiment and the near-term expected trajectory of the economy. All told, nine key indicators point lower, 16 are neutral, and 13 point higher. One thing worth noting: The nine indicators pointing lower are all lagging indicators. Many of those pointing upward are leading indicators.

Nucor recording lower second quarter earnings on falling steel prices. And the Charlotte, N.C.-based predicted that profits would be lower still in the third quarter, primarily because of weaker results from its steel mills divisions.

Cleveland-Cliffs’ earnings tumbled in the second quarter as the company cited weak demand and pricing.

Domestic raw steel production rise to a seven-week high last week, according to the latest release by the American Iron and Steel Institute (AISI). Raw output from US steel mills now stands at the highest recorded weekly rate since the first week of June.

Cleveland-Cliffs is starting a new electrical distribution transformer production plant in Weirton, W.Va.

They say a picture is worth a thousand words. Well, when you add in some commentary from respected peers in the steel industry to those pictures, that may shoot you up to five thousand words, at least. In that spirit, we’ve added some snapshots from our market survey this week, along with some comments from market participants.