Tag: Steel Summit

Flat-rolled steel prices have been largely falling since the beginning of the year. Even after a slight bump in early April when mills tried to halt the downtrend, the decrease resumed.

First off, we hope everyone had a safe and happy July 4th holiday, with fireworks seen and BBQs attended. Many parts of the country are quite toasty at the moment, signaling that, yes, summer has indeed arrived. And looking at our most recent survey results, the summer doldrums have arrived as well.

It’s been a slow start to the week as far as news goes, something you’d expect ahead of a shortened Independence Day week. That said, it’s not as if transactions have completely ground to a halt. (Prices continue to drift lower.) And while news might be slow, rumors of low-priced deals, price hikes, and trade cases seem to have filled that void.

Veteran investment bankers Vince Pappalardo and Andy Pappas will be the featured guests on the next SMU Community Chat on Wednesday, July 10, at 11 am ET (10 am CT). The live webinar is free to attend for all who register. A recording will be available only to SMU members. You can register here.

Domestic plate prices have been on a historic run since they began surging in January 2021. Tags reached an all-time high of $1,940 per short ton (st) in May 2022, though they have mostly trended lower over the past two years.

July is less than a week away, which means SMU’s Steel Summit in August is just around the corner.

It was great to have Gary Stein, CEO of Triple-S Steel, join SMU for a Community Chat earlier this week. (Btw, you can find a record of the webinar here.) We covered a lot of ground. From Andrew Carnegie and the Johnstown Flood to the current steel market and the state of domestic manufacturing broadly speaking. One thing that stuck with me was how unevenly construction spending appears to be on “green” initiatives and other key items funded by infrastructure spending, the Inflation Reduction Act, and the CHIPS Act.

US sheet prices continue to fall, with SMU’s average hot-rolled (HR) coil price now at $670 per short ton (st). Prices for cold-rolled and coated products are now in the mid/high $900s/st. As I noted in my last Final thoughts, the consensus among our readers is that prices will bottom out in July. And that makes intuitive sense. Lead times in mid/late July should be stretching into the typically busier fall months. The question then is where prices bottom.

Many of our contacts remain bearish about the very short-term direction of steel prices. But a consensus seems to be forming, according to our latest survey results, that a bottom will occur in July. Consensus is also that hot-rolled (HR) coil prices won't fall below $600 per short ton (st).

Summer has officially begun, and the countdown to SMU Steel Summit is on. More than 800 steel industry professionals from nearly 350 companies have already registered to attend the Summit on Aug. 26-28 at the Georgia International Convention Center (GICC) in Atlanta. Are you one of them? If so, we’re looking forward to seeing you […]

Nearly 800 people have registered to attend Steel Summit on Aug. 26-28 at the Georgia International Convention Center (GICC) in Atlanta.

We’re less than a week off from the official start of summer, and anticipation leading up to SMU’s Steel Summit 2024 is already heating up.

We’ve been writing a lot about sheet prices, and those for hot-rolled (HR) in particular, coming down. Here's one thing that hasn't dropped: The wide spread between HR and cold-rolled (CR) prices. That's what's in a chart below. And I'm using it as a rough proxy for galv and G'lume base prices as well

Now that June has arrived, the official countdown until SMU’s Steel Summit 2024 – North America’s premier flat-rolled steel conference – has begun. If you haven’t already registered, don’t delay. More than 700 attendees from more than 300 companies have already registered to be in Atlanta this August. In short, it’s poised to be another […]

We’re just a few months away from SMU’s Steel Summit 2024 – North America’s premier flat-rolled steel conference.

Let's take a collective deep breath ::in:: and ::out::... And we're back. But where exactly are we? Are steel prices going up or down? Is demand really decelerating or is it an illusion? How is the market navigating the new mill pricing mechanisms?

What's the tea in the steel industry this week? Here's the latest SMU gossip column! Just kidding... kind of. Yes, some of the comments we receive in our weekly flat-rolled market steel buyers' survey are honestly too much to put into print. Some make us laugh. Some make us cringe. Some are cryptic. Most are serious. We appreciate them all. Below are some highlights from our survey results this week. Some of the comments that we can share with you are also included, in italics, in the buyers' own words, with minimal editing on our part.

Unless you've been under a rock, you know by know that Nucor's published HR price for this week is $760 per short ton, down $65/st from the company’s $825/st a week ago. I could use more colorful words. But I think it’s safe to say that most of the market was not expecting this. For starters, US sheet mills never announce price decreases. (OK, not never. It has come to my attention that Severstal North America rescinded a price increase back on Feb. 14, 2012. And it caused quite the ruckus.)

Hold-rolled (HR) prices held roughly steady this week after slipping for much of April. I don’t have any spicy quotes to offer about mostly flat prices. Besides, a lot of the questions I’ve gotten recently have been about demand. Some of you tell me that it’s still stable or improving. Others tell me that it’s suddenly dried up.

What a difference a month makes. In late March, it seemed like the US hot-rolled (HR) coil market was poised to cycle upward. Large buyers had re-entered the market and placed big orders earlier in the month. Several outages were underway or upcoming. And expectations were that lead times would continue to extend. Cliffs said […]

Worthington Steel is taking a pause on M&A activity as it focuses on progressing its electrical steel expansions in Mexico and Canada.

SMU caught up with Barry Zekelman, executive chairman and CEO of Zekelman Industries, on Wednesday’s Community Chat. As one of the largest independent steel pipe and tube manufacturers in North America, his company is also one of the largest steel buyers in the region. This year alone, the Chicago-based company will buy roughly 2.8 million tons of steel. As such, Zekelman provides a great perspective on the steel industry and the markets it serves.

Join SMU’s next Community Chat webinar with Barry Zekelman, executive chairman and CEO of Zekelman Industries – the largest independent steel pipe and tube manufacturer in North America. The webinar will be on Wednesday, March 20, at 11 a.m. ET. It’s free for all to attend. A recording will be available to SMU members. You can register here.

What does it mean to be a domestic steelmaker in the 21st century? Of course, that idea is open to interpretation. The vibrancy of the US industry is a testament to that. Between integrateds, EAFs, how to approach decarbonization, downstream ventures, American innovation goes in many directions.

A clear consensus has emerged among respondents to SMU’s latest steel market survey that hot-rolled (HR) coil prices will bottom this month or in April. Seventy-five percent of respondents to our latest survey think that prices will find a floor before May as the chart below shows:

I want to give a big shoutout to the good folks at the Fabricators and Manufacturers Association (FMA) for inviting me to their annual conference this week in Clearwater, Fla. I also want to give a special thanks to the FMA for awarding SMU founder John Packard with a lifetime achievement award – on that also gave me a chance to catch up with my old boss in person.

Sheet prices have fallen again this week on shorter lead times, higher imports, and potentially higher inventories. (We’ll see for sure when we release our service center shipment and inventory data next week.) I remember reporting almost exactly the same thing about a month ago and getting a fair amount of pushback. Not so much these days.

Coming out of a strong fourth quarter, galvanized steel market participants are reporting an above-average start to January and are cautiously optimistic for 2024.

The end of one year is often both a time for reflection, and for looking ahead. You make sense of the ups and downs from January through December. Then you wipe off the old crystal ball, and try to make out what’s in store for the next 365 days.

While you gear up for the holidays, don’t forget that the 2024 Tampa Steel Conference is just a little over a month away. One of the premier steel conferences in the US, it will be a great complement to our record-breaking SMU Steel Summit this past August.