Steel Market Update is pleased to announce the new SMU NexGen Leadership Award in partnership with the Steel Manufacturers Association. The award is designed to recognize and celebrate the excellence of emerging leaders within the greater steel community. As an industry publication and supplier of market intelligence, and host of the premier steel conference in North America, SMU is […]
I have moved from our Steel 101 workshop in Iowa to Minnesota where I met with a large flat rolled service center this afternoon. The service centers are consistently reporting to SMU that the domestic steel mills are just plain producing too much steel. With scrap down and the marginal cost to produce a hot […]
Steel Market Update is pleased to announce the new SMU NexGen Leadership Award in partnership with the Steel Manufacturers Association. The award is designed to recognize and celebrate the excellence of emerging leaders within the greater steel community. As an industry publication and supplier of market intelligence, and host of the premier steel conference in North America, SMU is […]
Steel Market Update is dedicated to assist the greater steel community to attract and maintain young people to the industry. The SMU NexGen Leadership Award, which is in partnership with the Steel Manufacturers Association, is but one step in the process that was begun many years ago. Our Steel 101: Introduction to Steel Making & […]
AISTech 2019, presented by the Association for Iron & Steel Technology, boasted more than 8,000 attendees this year. The four-day conference May 6-9 in Pittsburgh included more than 550 technical presentations and nearly 550 domestic and international exhibiting companies. The exhibit floor was a dizzying display of the latest innovations from software and robotics to cranes […]
AISTech 2019, presented by the Association for Iron & Steel Technology, boasted more than 8,000 attendees this year. The four-day conference May 6-9 in Pittsburgh included more than 550 technical presentations and nearly 550 domestic and international exhibiting companies. The exhibit floor was a dizzying display of the latest innovations from software and robotics to cranes […]
First, please be aware that Sunday is Easter and Steel Market Update will not publish an issue on Sunday evening. Our next issue will be on Tuesday, April 23. We have been receiving calls and getting comments associated with our release of the SMU Service Center Inventories Analysis in Sunday evening’s issue where we showed […]
The Steel Manufacturers Association remains a strong supporter of Section 232, even as the tariffs face increased scrutiny as a stumbling block to passage of the new U.S.-Mexico-Canada trade agreement. SMA President Phil Bell defends the 25 percent tariffs on steel imports from critics who contend they unfairly tax downstream steel consumers. “The gloom and […]
The American Iron and Steel Institute and the Steel Manufacturers Association are among more than 200 companies and trade associations that have formed the USMCA Coalition to push for prompt congressional approval of the U.S.-Mexico-Canada trade agreement, the updated version of NAFTA. “We look forward to working with members of the USMCA Coalition to support […]
The Bureau of Industry and Security today denied the exclusion exemptions for two mills: California Steel Industries and Evraz. At this point, we are expecting the NLMK USA and JSW USA exclusion requests to be denied as well. However, a trade attorney (not Lewis) suggested that we not move too fast with any proclamations. There […]
Earlier this week I was at the Port of Tampa Steel Conference as I was asked to be the master of ceremonies, and I also moderated the two main panels on Wednesday morning. Both panels dealt with trade issues with the primary focus being on the Section 232 tariffs on steel. The Port of Tampa […]
I am in Tampa, Fla., where I will be the master of ceremonies and the moderator of two panels regarding trade and trade policy at the 30th Port of Tampa Steel Conference. Originally, I was only going to moderate one panel, but weather in the Northeast has fouled up air travel and the original moderator’s […]
I continue to get mixed messages regarding the strength of the flat rolled steel market, and specifically lead times and pricing. I have heard from a number of steel buyers of longer lead times on galvanized at a couple of mills. The strength does not yet seem to be universal. Neither is the weakness. For […]
There is a considerable amount of information/debate happening in Washington, D.C., Canada, Mexico, China and Europe regarding tariffs either in place or being threatened by the Trump administration. We included a press release in tonight’s issue that was sent out by Wilbur Ross of the U.S. Department of Commerce earlier this week. U.S. Trade Representative […]
President Trump signed an executive order today intended to boost the use of American-made iron, steel and other manufactured products in infrastructure projects by adding pressure on private and public sector entities that receive federal financial assistance. Called “Strengthening Buy American Preferences for Infrastructure Projects,” the order directs agency heads to “encourage recipients of new […]
The Steel Manufacturers Association would like to see the U.S.-Mexico-Canada Agreement ratified by the three countries, even if it calls for a change to the tariffs. Speaking at a press briefing during SMA’s board meeting Thursday in Washington, SMA President Phil Bell said the modernized trade rules in the USMCA are an improvement on NAFTA. […]
On Wednesday in New York, a three-judge panel on the U.S. Court of International Trade began deliberating a case that will examine the constitutionality of the Section 232 tariffs imposed by President Trump on imports of steel and aluminum in the name of national security. Opponents argue that such tariffs should be subject to congressional […]
We have opened registration for the 2019 SMU Steel Summit Conference, which will be at the Georgia International Convention Center in Atlanta on Aug. 28-30, 2019. We anticipate that 1,000 executives from the manufacturers, service centers, steel mills, trading companies, fabricators, toll processors and others associated with these industries will be in attendance. “I have […]
The North American auto industry is urging the White House to drop the Section 232 tariffs before the official signing of the U.S.-Mexico-Canada Agreement (USMCA). During testimony last week before the International Trade Commission, the Motor and Equipment Manufacturers Association, Alliance of Automobile Manufacturers and the American Automotive Policy Council asked the administration to exempt […]
SSAB Americas has announced the retirements of two long-standing, distinguished members of the company’s senior executive team: Steve Hansen, Vice President and Chief Technical Officer, and Paul Wilson, Senior Advisor to Operations. Wilson’s retirement will be effective Feb. 1, 2019, and Hansen’s retirement will be effective March 1, 2019. Hansen has been with SSAB for […]
The renegotiated NAFTA, now called USMCA (the U.S.-Mexico-Canada Agreement), still needs to be ratified in Mexico, the United States and Canada, but it is generating a plethora of commentary, both supportive and cautious. The new deal reached late Sunday “provides certainty to financial markets and supports investment and job creation in our country,” said incoming […]
Lewis Leibowitz, trade attorney and contributor to Steel Market Update, offers the following commentary on the latest developments in Washington: A rather eventful few days on the tariff and legal fronts: Final list of $200 billion in trade value of imports from China: The USTR announced the final list (“list 3”) of $200 billion in […]
What is in the nation’s best interest when it comes to international trade? Are the Trump administration trade policies the best approach? Speaking at the Steel Market Update Steel Summit Conference in Atlanta on Aug. 27, a spokesperson for the domestic steel industry and a Washington trade attorney offered sharply contrasting views. The Steel Manufacturers […]
We are now one week away from the start of the 2018 SMU Steel Summit Conference. We are continuing to accept registrations, and we expect the conference to be completely full when we kick off at 1 p.m. on Monday, Aug. 27. If you would like to register, you can do so on our website […]
The 2018 SMU Steel Summit Conference is on pace to become the largest conference we have ever hosted. Our conference will be the premium networking event for manufacturers, fabricators, steel distributors, steel mills, trading companies and toll processors, as well as the industries that supply those groups. Based on the current registration rate, we anticipate […]
A meeting of the Global Forum on Excess Steel Capacity scheduled for Wednesday in Paris has been postponed until September as trade tension intensifies among world leaders. The agenda for the ministerial meeting of the 33-member Forum was to include discussions on preferential policies that China and other countries apply to their steel industries, as […]
I am excited for you, our customers. I have been working closely with the CRU Group, and our members will begin to see some subtle changes to the articles we write. One will be the use of CRU data on such items as our Foreign vs. Domestic Price Spread articles, which we will publish in […]
Jean Carroll Kemp may have been the speaker at the Association of Steel Distributors meeting in Chicago last Thursday, but it was ASD members who really delivered the message. The event was co-hosted by the Chicago Chapter of Association of Women in the Metals Industry (AWMI). Kemp is the Senior VP of Government Affairs and […]
Commerce Secretary Wilbur Ross has made it official—there will be no tariff exemptions for Canada, Mexico, and the European Union. In a briefing on Thursday, Ross said the tariffs of 25 percent on imports of steel and 10 percent on imports of aluminum will go into effect at midnight. Argentina, Brazil, Australia and South Korea […]
Last week Steel Market Update conducted our early May 2018 flat rolled and plate steel market trends survey. We sent invitations to 640 individuals representing approximately 620 companies mostly located in the United States and Canada. The purpose of our inquiries is to better follow various trends affecting the flat rolled and plate markets. We […]