Don’t forget to tune into SMU’s next Community Chat webinar on Wednesday, June 23, at 11 a.m. ET with SSAB Americas President Charles Schmitt. SSAB, a Nordic steel company with employees in over 50 countries, claims to be the largest producer and supplier of heavy plate in North America, with a market share of approximately 33% in […]
U.S. Steel’s mill in Košice, Slovakia, must swap out its blast furnaces for electric-arc furnaces (EAFs) to survive in a decarbonizing world, a government official said. The problem: Doing so doesn’t come cheap. The change would cost approximately €1.5 billion ($1.8 billion), Slovakian Finance Minister Igor Matovič said per reports in local media. “If we want […]
SSAB Americas and Evraz North America have followed Nucor in increasing plate prices by at least $100-150 per ton ($5-7.50/cwt). Both steelmakers said their price hikes were effective immediately in letters to customers dated Thursday, May 20. SSAB said the $100-per-ton increase applied to as-rolled mill plate and coil as well as to cut-to-length plate more […]
SSAB Americas and Evraz North America have followed Nucor in increasing plate prices by at least $100-150 per ton ($5-7.50/cwt). Both steelmakers said their price hikes were effective immediately in letters to customers dated Thursday, May 20. SSAB said the $100-per-ton increase applied to as-rolled mill plate and coil as well as to cut-to-length plate more […]
U.S. Steel has left open the possibility of moving its endless casting and rolling project–initially slated for its Mon Valley Works in western Pennsylvania–elsewhere. The Pittsburgh-based steelmaker declined to say what equipment it had in hand and where it might be able to relocate it. “We do not have any information beyond what has already been […]
SSAB Americas reported lower shipments of 480,000 metric tons in the first quarter of 2021 despite strong demand for heavy plate in North America. Due to weather issues in February and lower slab inventories at the beginning of the quarter, shipments fell 16% from the previous quarter and 9% compared to Q1 2020. Higher steel […]
Nucor has increased plate prices by $80-100 per ton ($4-5/cwt) along with the opening of its June order book. Nucor’s new ex-works base price for cut-to-length A36 plate is $1,220 per ton ($61/cwt), up from $1,140 per ton a month ago, according to letters to customers. The steelmaker’s new base prices for quenched-and-tempered Grade A514 […]
SSAB Americas aims to increase plate prices by at least $60 per ton ($3/cwt) on all new, non-contract orders effective immediately. The steelmaker’s price hike appears to be a leading move, according to market participants. The price increase applies equally to as-rolled mill plate, cut-to-length plate more than 72 inches wide, hot-rolled coils more than […]
Swedish steelmaker SSAB and automaker Volvo have teamed up to make what they hope will be the first vehicles made from fossil-free steel. Volvo plans to begin production of concept vehicles this year using fossil-free steel produced by SSAB, which is pioneering a hydrogen-based steelmaking process. Small-scale serial production will begin in 2022, and mass […]
Nucor increased plate prices by $50 per ton ($2.50/cwt) in the afternoon on Friday, March 26, after SSAB had earlier in the day lifted plate tags by $100 per ton. It was not immediately clear why there was such a large difference. The steelmakers don’t always increase plate prices by the same amount, but a […]
SSAB Americas aims to increase plate prices by $100 per ton ($5/cwt) on all new non-contract orders, effectively immediately. The price hike applies equally to as-rolled mill plate, cut-to-length plate more than 72 inches wide, hot-rolled coils more than 72 inches wide, normalized plate, and quenched-and-tempered plate, SSAB said in a letter to customers Friday, […]
Foreign or domestic? “More risk buying domestic….” I had some interesting conversations with steel buyers today as I have been trying to gauge the strength of domestic price support, and what will be the catalyst that will turn the tide. One large manufacturing steel buyer with operations around the world told me, “The prices will […]
Foreign or domestic? “More risk buying domestic….” I had some interesting conversations with steel buyers today as I have been trying to gauge the strength of domestic steel price support, and what will be the catalyst that will turn the tide. One large manufacturing steel buyer with operations around the world told me, “The prices […]
Reducing carbon isn’t just something that steel wants to do to be a good corporate citizen, it’s increasingly something that key customers – such as automakers – are demanding. Case in point: German automaker BMW is investing in a CO2-free steel production process developed by Boston Metal, a U.S.-based start-up. Boston Metal has found a way […]
The U.S Department of Commerce has decided to continue antidumping duties on cut-to-length plate imported from China, Russia and Ukraine as part of the “sunset review” process. China will remain subject to dumping margins of up to 128.59%, Russia to dumping margins of as much as 185% and Ukraine to margins of up to 237.91%, […]
SSAB Americas raised some eyebrows in the steel market when it officially announced a “scrap collar” along with an $80-per-ton ($4/cwt) plate price increase earlier this week. The move, while not unheard of in the steel market, is not necessarily typical for standard spot market plate orders, some buyer sources said. An SSAB Americas spokeswoman […]
SSAB Americas raised some eyebrows in the steel market when it officially announced a “scrap collar” along with an $80-per-ton ($4/cwt) plate price increase earlier this week. The move, while not unheard of in the steel market, is not necessarily typical for standard spot market plate orders, some buyer sources said. An SSAB Americas spokeswoman […]
SSAB has increased plate prices by $80 per ton ($4/cwt) for U.S. customers and C$100 per ton for customers in Canada. The price hike is effective immediately and applies to all new non-contract orders of as-rolled mill plate, cut-to-length plate more than 72 inches wide, hot rolled coils more than 72 inches wide, normalized plate […]
Rio Tinto, Paul Wurth SA and SHS Stahl Holding Saar are exploring a potential hydrogen-based hot-briquetted iron (HBI) operation in Canada. The Anglo-Australian miner, the equipment manufacturer and the German steelmaker have already inked a memorandum of understanding. They will now conduct a feasibility study about an “industrial-scale” low-carbon iron production plant, according to a […]
Swedish steelmaker SSAB navigated a difficult year in 2020, taking down production and idling blast furnaces due to lower demand and COVID-19 restrictions. “Looking back at it, I think our flexibility in the system has served us well because when the market started to recover in Q4, we were quite fast to adapt to that […]
No steel mill earnings report is complete these days without the CEO touting his company’s environmental credentials. Cleveland-Cliffs CEO Lourenco Goncalves said this week that his company is committed to reducing its greenhouse gas emissions 25% by 2030. “We at Cleveland-Cliffs acknowledge that one of the most important issues impacting our planet is climate change. […]
We continue to receive registrations for the 32nd annual Tampa Steel Conference to be held virtually next week on Feb. 2. We expect over 400 attendees once the conference opens. Here are some of the companies that registered just this week, those with an asterisk (*) next to their name means they have more than one person […]
Evraz North America has followed Nucor and SSAB Americas in increasing plate prices by at least $80 per ton ($4/cwt). The steelmaker said that the increase was effective immediately and that it applied equally to all carbon, high-strength low-alloy, hot-rolled coil, normalized, and quenched-and-tempered products, according to a letter to customers Jan. 26. “We reserve the […]
Nucor and SSAB Americas aim to increase plate prices by another $80 per ton ($4/cwt). Effective immediately, Nucor’s new ex-works base price for cut-to-length grade A36 plate is $1,020 per ton ($51/cwt), up from $940 per ton on Jan. 5, according to a letter sent to customers on Tuesday. The new base price for quenched-and-tempered A514 […]
Nucor and SSAB Americas have raised plate prices sharply higher to ring in the New Year. Effective immediately, Nucor’s new ex-works base price for cut-to-length grade A36 plate is $940 per ton ($47/cwt), up $140 per ton from $800 per ton on Dec. 14, according to letters to customers dated Tuesday, Jan. 5. The new […]
Flat Rolled = 40.0 Shipping Days of Supply Plate = 45.7 Shipping Days of Supply Flat Rolled Service center flat rolled steel inventories continue to reach new lows. At the end of November, service centers carried 40 shipping days of supply, down from 43.1 days in October. November had 19 shipping days, compared to October’s […]
SSAB Americas notified customers Wednesday that it is increasing transaction prices by $40 per ton on non-contract orders of its plate products “to maintain fair market value for its products.” The increase applies to As-Rolled Mill Plate, Cut-To-Length Plate >72”, Hot Rolled Coils >72”, Normalized Plate and Quenched & Tempered Plate shipped via preferred freight […]
Plate prices have finally gained some traction, seeing a notable jump this past week to an average of $720 per ton, according to Steel Market Update’s latest check of the market. Nucor and SSAB Americas announced plate increases this week in hopes of maintaining that upward momentum. Flat rolled prices continued their relentless climb, with […]
Steel plate is likely to get more expensive, and not just because of the usual price increases. SSAB Americas informed customers on Monday that it has increased transaction prices by a minimum of $50 per ton effective on all new non-contract orders of As-Rolled Mill Plate, Cut-To-Length Plate >72”, Hot Rolled Coils >72”, Normalized Plate […]
JSW Steel USA has hired Christine Ovsenar as its new Chief Commercial Officer, effective Jan. 1, 2021. Ovsenar will be responsible for developing JSW Steel USA’s commercial team and strategy. She joins the company following 19 years at SSAB where she most recently served as Director of Sales, Commercial Products. Her 30 years of experience in […]