Swedish steelmaker SSAB said it has produced the world’s first-fossil free steel and delivered a trial order to automaker Volvo. “It’s possible to … significantly reduce the global carbon footprint of the steel industry. We hope that this will inspire others to also want to speed up the green transition,” SSAB President and CEO Martin Lindqvist […]
SSAB Americas aims to increase plate prices by $150-200 per ton ($7.50-$10 per cwt) effective immediately. The $150-per-ton price hike applies to as-rolled mill plate and coil as well as to cut-to-length plate more than 72 inches wide, the steelmaker said in letters to customers on Monday, July 26. The $200-per-ton increase is for all […]
SSAB Americas reported record profits on shipments totaling 494,000 metric tons in the second quarter, up 2% from the previous quarter and up 6% when compared to the same year-ago period. Demand for heavy plate remained strong across most consumer segments, the company said. Sharp increases in steel prices pushed revenues up 32% from the […]
Nucor plans to slash Scope 1 and Scope 2 greenhouse gas emissions at its steel mills by 35% by 2030. North America’s largest steelmaker also aims in the following years to be “net zero” when it comes to carbon emissions. “Our GHG intensity is less than one-third the world average, but we are committed to […]
One of two United Steelworkers (USW) locals at Algoma Steel is opposed to the Ontario mill’s proposed switch from integrated steelmaking to electric arc furnace (EAF) production. USW Local 2251 President Mike DaPrat went so far as to boycott an event at the mill – attended by Canadian Prime Minister Justin Trudeau – to announce government-funding […]
Steel Dynamics Inc. (SDI) aims to be carbon neutral at its electric arc furnace (EAF) steel mills by 2050. The steelmaker has also set interim emissions reductions goals for 2025 and 2030. Namely, it plans to reduce combined Scope 1 and Scope 2 greenhouse gas emissions at its EAF mills by 20% by 2025 and […]
Steel Market Update is pleased to announce that Dan Sullivan, founder of Chicago-based Montrose Advisors, will be the featured speaker for our next Community Chat webinar on Wednesday, July 14 at 11 a.m. ET. Montrose Advisors specializes in M&A among small- to mid-size privately held service centers, fabricators and manufacturers. Think Berlin Metals’ sale to […]
Steel Market Update is pleased to announce that Dan Sullivan, founder of Chicago-based Montrose Advisors, will be the featured speaker for our next Community Chat webinar on Wednesday, July 14 at 11 a.m. ET. Montrose Advisors specializes in M&A among small- to mid-size privately held service centers, fabricators and manufacturers. Think Berlin Metals’ sale to […]
Algoma Steel is slated to receive as much as C$420 million ($340 million U.S.) from the Canadian government to help pay for its switch from integrated steelmaking to electric-arc furnace (EAF) production. The amount will be distributed over four years and is aimed at making the Sault Ste. Marie, Ontario-based flat-rolled steelmaker one of the […]
U.S. Steel is studying the possibilities for deploying carbon capture and storage (CCS) as well as hydrogen-based production as part of its efforts to decarbonize. The Pittsburgh-based steelmaker is doing so via a non-exclusive memorandum of understanding with a U.S. subsidiary of Norwegian energy company Equinor ASA. The effort will be centered in the Mon Valley […]
Mark Bula sees an analogy between the latest green steel technology and the electric arc furnaces (EAFs) that transformed traditional steelmaking back in the 1980s. “Just as minimills once disrupted the industry, we must once again take a monumental leap forward,” he said. Bula is well known in the steel industry for his prior role […]
SSAB Americas President Chuck Schmitt joined SMU for a Community Chat webinar last week during which we talked plate, renewable energy and fossil-free steelmaking. We also got to some good questions from you about the hydrogen-based steelmaking SSAB is undertaking in Sweden through its HYBRIT partnership with iron ore miner LKAB and power producer Vattenfall. […]
SSAB Americas plans to take a three-week outage at its plate mill in Mobile, Ala., in late November and early December, a company spokeswoman said. No outage is planned at the steelmaker’s plate mill in Montpelier, Iowa, for the balance of the year, she added. SSAB Americas – and subsidiary of Swedish steelmaker SSAB – […]
Let’s talk about lead times. Because the results from our latest survey caught my attention. This is the first time in since January-February that you can maybe discern a potential peak in pricing – at least judging by that metric. Lead Times: Trend or Head Fake I’m going to display our lead latest lead time […]
Let’s talk about flat rolled and plate steel mill lead times. Because the results from our latest steel market survey caught my attention. This is the first time in since January-February that you can maybe discern a potential peak in pricing – at least judging by that metric. Lead Times: Trend or Head Fake I’m […]
Nucor has increased base prices for steel plate by at least $120 per ton ($6/cwt) along with the opening of its August order book. The new, higher prices are effective immediately and will be collected along with published freight and extras, the Charlotte, N.C.-based steelmaker said. Nucor’s new ex-works base price for cut-to-length A36 plate […]
Encouraging the market to use better steel, and use steel better, along with being a leader in fossil-free steel production, is SSAB’s broader goal, said SSAB Americas President Charles Schmitt, during Wednesday’s SMU Community Chat webinar. SSAB Americas is the largest supplier of heavy steel plate in North America. Steel consumption has doubled since 2000, and […]
SSAB Americas aims to increase plate prices by another $50 per ton ($2.50 per cwt) – just days after lifting tags by $100 per ton. The latest increase is effective immediately on all non-contract orders, and it means SSAB’s prices are up $150 per ton within a span of only three days. The latest increase […]
If you’re seeking a peak, keep looking. Because it wasn’t this week. Steel Market Update found that spot prices for most sheet and plate products were again higher – despite scattered reports of increased availability for some contract buyers. SMU’s benchmark hot-rolled coil prices stands $1,760 per ton ($88/cwt), up $40 per ton from last […]
SSAB and its green steel partners LKAB and Vattenfall claim to have made a major breakthrough in environmentally friendly steelmaking. The HYBRIT team said it has produced the world’s first hydrogen-reduced sponge iron, a major step toward fossil-free steel. The HYBRIT pilot plant in Sweden – a joint project undertaken by steelmaker SSAB, iron ore […]
SSAB Americas aims to increase steel plate prices by at least $100 per ton ($5/cwt) effective immediately on all new spot orders. The increase applies equally to as-rolled mill plate and coil, cut-to-length plate, normalized plate, and quenched-and-tempered plate, the company said in a letter to customers on Monday, June 21. “In addition to this […]
Flat rolled steel prices have been rising consistently for 45 straight weeks (since the week of Aug. 10, 2020). There is a chance (no guarantees) that we could see the cycle continue for a full 52+ weeks as the steel mills continue to have supply issues and demand remains quite strong in just about every […]
Infrastructure, Energy, Wind Farms, Tanners, Summit Conference, Imports. If you are watching the news, you are aware of the Biden administration’s push for a large (at least $1 trillion) infrastructure bill. There is a lot of discussion about what infrastructure entails in light of the current economy. It’s not your father’s economy. There is need […]
I want to thank the National Association of Steel Pipe Distributors for giving me a chance to open their summer conference in Denver last week. I spoke about – what else, these days – steel prices. During the Q&A afterward and on the sidelines of the event, it was clear people were worried about (a) […]
I want to thank the National Association of Steel Pipe Distributors for giving me a chance to open their summer conference in Denver last week. I spoke about – what else, these days – steel prices. During the Q&A afterward and on the sidelines of the event, it was clear people were worried about (a) […]
Nucor CEO and President Leon Topalian will serve as the next chairman of the American Iron and Steel Institute, announced the AISI Board of Directors on Tuesday. Topalian will serve a two-year term at the head of the industry trade group, taking over the role from John Brett, CEO of ArcelorMittal North America. “Leon Topalian […]
Privately held Canadian steelmaker Algoma Steel has agreed to be taken over and taken public in a deal valued at as much as $1.7 billion, the company said. Proceeds from the initial public offering (IPO) might result in the Sault Ste. Marie, Ontario-based company becoming the latest producer to switch from integrated to electric arc […]
Don’t forget to tune into SMU’s next Community Chat webinar on Wednesday, June 23, at 11 a.m. ET with SSAB Americas President Charles Schmitt. SSAB, a Nordic steel company with employees in over 50 countries, claims to be the largest producer and supplier of heavy plate in North America, with a market share of approximately 33% in […]
Don’t forget to tune into SMU’s next Community Chat webinar on Wednesday, June 23, at 11 a.m. ET with SSAB Americas President Charles Schmitt. SSAB, a Nordic steel company with employees in over 50 countries, claims to be the largest producer and supplier of heavy plate in North America, with a market share of approximately 33% in […]
Don’t forget to tune into SMU’s next Community Chat webinar on Wednesday, June 23, at 11 a.m. ET with SSAB Americas President Charles Schmitt. SSAB, a Nordic steel company with employees in over 50 countries, claims to be the largest producer and supplier of heavy plate in North America, with a market share of approximately 33% in […]