Ferrous scrap prices settled in Detroit with prime grades (bundles/busheling) settling at $360 per gross ton. At the same time there is Chinese auto bundles for sale at very low prices FOB China. Chinese scrap exports are new for the Chinese and there are issues that need to be overcome before they become major suppliers […]
Scrap dealers are pointing at the order book at the domestic mills as one of the main reasons why ferrous scrap prices inched back after the domestic mills initially pushed for shred and obsolete grades to be lower by $30 per gross ton. The mills could not get enough dealers to fill their scrap order […]
Early indications (and we should put special emphasis on the word “early”) are for ferrous scrap prices to trend slightly lower on shred and obsolete grades while prime grades (busheling/bundles) are expected to trade sideways due to strong demand from sheet mills. In March, prices for prime grades of scrap rose $60-$65 per gross ton […]
The scrap market created a lot of buzz over the past two months that resulted in, so far, two domestic steel mill price increases totaling $60 per ton ($3.00/cwt). I got a note over the weekend from one of the national companies who told me about the scrap markets, “There is a sense the market […]
Flat rolled steel order books have been helping push ferrous scrap prices higher for March delivery to the domestic steel mills. Steelmakers have paid $50 to $80 per gross ton higher prices than February for prime grades such as busheling and bundles. Sheet mills pushed their buying prices in order to get the supply of […]
The ferrous scrap markets have been all about doom and gloom up until the past couple of days. Obsolete grade and shredded scrap were reported trading down $25 per ton in Brazil. Prime grades were down $10 per ton. Our sources were telling us export prices were down and the exporters off the east coast […]
Steel Market Update (SMU) has been struggling to get a clear view of the current market situation as we attempt to identify which direction we see flat rolled steel prices going from here. We have been receiving mixed messages over the past two weeks and we have been advising our readers to remain vigilant and […]
Ferrous scrap price negotiations for January were slow to develop but by late Thursday and into Friday prices firmed and deals between the domestic steel mills and the scrap dealers were getting done. The two largest scrap buyers, David J Joseph (Nucor) and Omnisource (Steel Dynamics), entered the market late during the week at $30 […]
January scrap negotiations have begun between the domestic (USA & Canada) steel mills and their scrap suppliers. As one large scrap company put it, “Things are slow to develop today, but I’m anticipating some movement by day’s end. This market has been sort of like a junior high dance at this point, with the reluctant […]
The following article on the hot rolled coil (HRC) futures markets was written by David Feldstein. As Flack Steel’s director of risk management, Dave is an active participant in the hot rolled coil (HRC) futures market and we believe he will provide insightful commentary and trading ideas to our readers. Besides writing Futures articles for […]
Since Tuesday Steel Market Update has received more input regarding the ferrous scrap markets and what we may be looking at regarding negotiations as we head into the month of January. We asked a couple of questions to World Steel Dynamic’s scrap guru, Mike Markley and this is what he told us: Initial thoughts are […]
If you are a steel buyer thinking that this rash of price increase announcements has run its course you may want to re-think the market forces again. One of the major scrap exporters booked a cargo of 80/20 mix to Turkey at $296 per metric ton delivered. They also sold shredded scrap at $301 delivered. […]
Often with steel related economic statistics it’s useful to compare a given data stream with others which may or may not be causally related. This usually puts the steel data into context and shows whether a direction change is for real. In this piece we are comparing the price of Chicago shredded scrap with the […]
Steel Market Update (SMU) ferrous scrap sources advised us over the weekend that strength in the Ohio Valley, as well as in the export markets, has led to ferrous scrap prices trading higher than originally thought. Talks continue in many of the regions of the country which have not yet completed scrap pricing negotiations for […]
All eyes this week will be on the scrap dealers and their steel mill customers as they haggle over where ferrous scrap prices will trade for the month of November. The opinion of many in the steel industry is that as scrap prices increase, it will both support the flat rolled steel price announcements already […]
Steel Market Update ferrous scrap sources advised us over the weekend that scrap negotiations have wrapped up between the dealers and the domestic mills and that steel mills, once again, have walked away the winners as scrap prices dropped across the country. However, the weakest areas are those furthest away from the east coast where […]
Market sources are advising Steel Market Update to expect lower ferrous scrap prices in October. We are hearing the expectation by the dealers is for prices to drop anywhere from $15 to $40 per ton with most believing the adjustments will be in the $20 per ton range for obsolete grades and $30 per ton […]
Scrap prices surprised scrap dealers and have deteriorated more than what was expected going into September negotiations with the domestic steel mills. Here is how one of the national scrap companies portrayed the tone of the negotiations: “As you can imagine, it’s been a hectic time since the return from the holiday last week. As […]
SMU scrap sources advised ferrous scrap prices have settled in Detroit with prime grades (Busheling and bundles) moving lower by $30 per gross ton and shredded scrap by $20 per gross ton. Dealers had been hoping that a slower flow of feeder stock into the yards coupled with stronger buying by long products mills might […]
Scrap trading has been slow to develop in all but the Detroit area mills. The domestic steel mills are trying to reduce the spread between shredded scrap and prime grades of scrap (busheling and bundles) which in some cases has expanded to $70 per gross ton. Scrap guru Michael Marley reported this afternoon that the […]
As reported last week, obsolete grades of ferrous scrap came under price pressure as negotiations concluded for July deliveries. Prime grades, however, saw prices move sideways as the spread between shredded scrap and primes increased. The product that saw the most movement was shredded due to excessive inventories and little movement on the export front […]
To our USA customers welcome back from your 4th of July holiday. I saw this quote while doing some research this afternoon, “Fun is one of the most important and underrated ingredients in any successful venture” (Richard Branson) This is something I have believed in for my entire steel career. Speaking of fun, we have […]
We purposely did not begin this article on where our sources are seeing ferrous scrap prices with an attention grabbing headline as we think readers would be confused. The confusion comes from the pressure the domestic steel mills are expected to put on obsolete grades, like shredded scrap and HMS (heavy melt scrap). Those of […]
There is a big difference between the settlement prices in the Midwest versus those on the East Coast. Ferrous scrap prices in the Chicago area saw shredded scrap drop by $30 per gross ton, cuts (obsolete scrap) was down $20 per ton while prime grades (bundles and busheling) went sideways. In the Detroit numbers shredded […]
SMU scrap sources on Friday divulged that negotiations have been slow with many mills not yet having bought as of this past Friday. Price indicators are running from sideways on prime grades (busheling/bundles) to down $10, $20, $30 in the Ohio Valley, Midwest and Southeast. The east coast was referenced as being down by even […]
I received a couple of notes from trading companies thanking me for my article on Thursday evening (The Sky is NOT Falling… at least not yet) as I tried to put into context some of the pricing available for foreign steel, correct some misinformation and look at the bigger picture. Even as questions arise about […]
My understanding is most of the mills canceled any scrap not yet delivered by the end of May. They do this when they believe scrap negotiations for June will result in better prices for them. It is still very early in the negotiation process, especially considering that Monday was a holiday. One scrap expert told […]
Scrap prices settled higher by $20 to $30 per gross ton delivered to the domestic steel mills, according to Steel Market Update (SMU) scrap sources. The rise in ferrous scrap prices has been one of the driving factors behind the flat rolled price increases announced by the domestic steel industry over the past few months. […]
Scrap negotiations are taking some time to complete as the steel mills and dealers haggle over what is an appropriate increase above what the mills paid during the month of April. Our sources are advising us that there have been a few transactions in the Midwest and in the Detroit markets. So far the Detroit […]
Steel Market Update ferrous scrap sources are advising us that scrap prices are poised to move $30 to $50 per gross ton higher for April deliveries than what we saw negotiated at the beginning of March. The issue is supply. The domestic sheet mills are having issues finding all of the tonnage they need and […]