The value of the U.S. dollar is in free fall on the international foreign exchange markets. Through July 18, the Broad Index value of the U.S. dollar had depreciated by 7 percent since January 3. Comparing on a rolling three-month basis, the index has declined every single day since January 20. (Please see the end […]
Like the rest of the steel market, wholesalers of galvanized steel and other products used in HVAC applications are stuck in an uncomfortable wait-and-see mode as the Section 232 drama plays out in Washington. In the monthly steel conference call hosted today by the Heating, Air-conditioning, and Refrigeration Distributors International, HARDI members reported anxiety over […]
We believe that misinformation (or lack of) about regional import volumes is often used to influence purchase decisions. Our intent with this analysis of tonnage by district of entry is to describe in detail what is going on in a company’s immediate neighborhood and thus provide a negotiating advantage for our premium subscribers. We are […]
Apparent supply is a proxy for market demand, and for hot rolled coil has been growing strongly this year. Imports continue to be an increasing factor in the sheet markets. There is a major difference in import market share for the four major sheet products. This report summarizes total steel supply from 2003 through May […]
The final license data for June was reported by the Steel Import Monitoring and Analysis system of the U.S. Commerce Department on July 5. An explanation of the methodology that we at SMU use to analyze the trade data is given at the end of this piece. All volumes in this analysis are reported in […]
Once its new Ruhrstahl-Heraeus (RH) degasser is fully commissioned in the next 30-45 days, Big River Steel will have all its steelmaking equipment up and running. Except for “a few hiccups,” the startup of the new EAF mill in Osceola, Ark., has gone smoothly, said Mark Bula, chief commercial officer, “above plan, plan-plus.” Speaking at […]
An explanation of the Key Market Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. This will explain the difference between our view of the present situation, which is subjective, and our analysis of trends, which is based on the latest facts available. In the June […]
Please see the end of this report for an explanation of data sources. The analysis of currency trends is a highly technical undertaking; therefore we at SMU rely on the opinions of experts for much of our commentary. As expected, the Fed raised its policy rate range by 25 basis points on June 14. This […]
Daily shipments by service centers in May decreased by 1.4 percent from April’s result. On average since 2009, May has increased by 1.3 percent, therefore these latest numbers were a little worse than normal for this time of year. Carbon steel shipments were 148,500 tons per day in May and months on hand on the […]
On Friday, June 16th USS/POSCO Industries (UPI) in Pittsburgh, California increased flat rolled steel prices by $50 per ton ($2.50/cwt). The steel price increases were to be in effect “immediately.” Prices were raised on all products produced at UPI. This includes hot rolled pickled & oiled (HRPO), cold rolled (CR) and galvanized steels. In a […]
The steel industry has a way of surprising those who use its products. This may be especially true this year as it appears the industry is about to enter a phase not seen in decades. It is mid-June 2017 and the domestic flat rolled steel mills are raising steel prices as the U.S. Department of […]
Nucor Corp. expects second-quarter results to be somewhat weaker than the first quarter, but an improvement from second-quarter 2016. Results in the range of $1.00 to $1.05 per diluted share will be Nucor’s best second-quarter performance since 2008. In guidance this week, Nucor noted a decrease in the performance of its sheet and bar mills […]
As you can see by the number of articles in tonight’s newsletter, there is a LOT going on and we are working over-time trying to stay on top of everything. For that reason we have put off our MSCI articles until Sunday evening’s issue (we will actually publish them to the front of our website […]
The uncertainty surrounding the Section 232 national security investigation on steel has HARDI members worried about what the steel industry will be like if the ruling favors domestic steel mills and imports are sharply curtailed. In the monthly steel conference call hosted by HARDI (Heating, Air-conditioning, and Refrigeration Distributors International), members talked about “chaos” and […]
We start this report with comments made by Jun Wei Yeo on iron ore and coking coal. “In April to May alone, there was an over 30 percent drop in the price of iron ore. Iron ore mining companies such as Rio Tinto, BHP Billiton, and Brazil’s Vale are suffering simultaneous stock price declines. Most […]
We believe that misinformation (or a lack of) about regional import volumes is often used to influence purchase decisions. Our intent with this analysis of tonnage by district of entry is to describe in detail what is going on in a company’s immediate neighborhood and thus provide a negotiating advantage for our premium subscribers. We […]
The final license data for May was reported by the Steel Import Monitoring and Analysis system of the U.S. Commerce Department on June 6. An explanation of the methodology that SMU uses to analyze the trade data is given at the end of this piece. All volumes in this analysis are reported in short tons. […]
This report summarizes total steel supply from 2003 through April 2017 and year-on-year changes. It then compares domestic mill shipments with total supply to the market. It quantifies market direction by product and enables a side-by-side comparison of the degree to which imports have absorbed demand. Sources are the American Iron and Steel Institute and […]
All of the major flat rolled steel producers have approached their customers and advised them of their intention to increase hot rolled, cold rolled, galvanized and Galvalume prices by a minimum of $30 per ton. As of this evening (Tuesday, June 6, 2017) we have seen price announcements out of California Steel Industries, USS Posco […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. This will explain the difference between our view of the present situation which is subjective and our analysis of trends which is based on the latest facts available. We now have three […]
CHARLOTTE, N.C., May 25, 2017 /PRNewswire/ — Nucor Corporation (NYSE: NUE) announced today that it is investing an estimated $176 million to build a hot band galvanizing and pickling line at its sheet mill in Ghent, Kentucky. The new galvanizing line will expand Nucor Steel Gallatin’s product capabilities and have an annual capacity of 500,000 […]
Steel Market Update (SMU) has been contacted by end users, distributors and steel mills regarding an article published by another trade publication on Galvalume. The article, which was published on Thursday, May 18, 2017, quoted Keith Medick, president and CEO of Union Corrugating Company, as he made the point that there is not enough light […]
Flat rolled steel distributors are reporting to Steel Market Update (SMU) that their inventories are balanced to slightly over-stocked and there is minimal need to build carbon sheet inventories from here. At the end of March the MSCI reported flat rolled steel inventories at 1.82 month’s supply. Last week the MSCI reported end of April […]
When we saw that shipments had dropped by over 500,000 tons in April our first thought was “Yikes!” but as we looked deeper we saw that shipping days in March were 23 days (their highest in the cycle) and in April fell to 19 days. Daily shipments in April increased by 6.6 percent from March. […]
Later this week the U.S. Department of Commerce will hold public hearings for interested parties to voice their opinions regarding the Section 232 (national security) inquiry into the steel industry. Many believe the conclusion of this investigation was predetermined at the time of the original announcement. In the Fact Sheet produced by the U.S. Department […]
The Metal Service Center Institute (MSCI) released their April 2017 shipment and inventories data for the United States and Canada. The following is a recap of the U.S. data. Total steel shipments (all products) were reported to be 3,110,500 tons which was 4.2 percent lower than year ago levels (19 days vs. 21 day month […]
HVAC wholesalers reported despite “good” demand they are seeing ultra-competitive conditions on the sales of galvanized steel they are attempting to sell into the HVAC (heating, ventilation, air-conditioning) markets. Steel Market Update participates in a monthly steel conference call hosted by HARDI (Heating, Air-conditioning, and Refrigeration Distributors International) for their member companies. The HARDI conference […]
AM Castle, a distributor of specialty metal and supply chain solutions, reported net sales in Q1 2017 of $136 million, a decrease of $28 million or 17 percent compared to Q1 2016 net sales of $164 million, which included the $27 million sale of inventory of the Houston and Edmonton locations. Tons sold per day […]
How Much Power Does Section 232 Give the President to Restrict Steel Imports? Commentary by Lewis LeibowitzThe Law Office of Lewis E. LeibowitzWashington, D.C. We have had many questions about the power of the President under Section 232 of the Trade Expansion Act of 1962. The statute gives the President considerable power to take action […]
This report summarizes total steel supply from 2003 through March 2017 and year on year changes. It then compares domestic mill shipments with total supply to the market. It quantifies market direction by product and enables a side by side comparison of the degree to which imports have absorbed demand. Sources are the American Iron […]