Nucor’s Sheet Mill Group announced a $40 price hike this morning. In an Oct. 10 letter to customers, Nucor said that base prices on hot rolled, cold rolled and galvanized steel products would all increase by $40 per ton, effective immediately. The steel mills have been largely silent on price changes for the past few […]
Spot plate prices have not budged this week, according to the numerous data points received from both large and small plate buyers today. Our range is $980 to $1,030 per ton delivered with an average of $1,005 per ton. The domestic plate mills continue to be on “controlled order entry” (they don’t like the word […]
Rolled product imports into the United States were down by 21.6 percent in September on a three-month moving average basis compared with the prior year, according to Steel Market Update’s latest analysis of import license data. Figure 1 shows the tonnage of total rolled steel and semi-finished imports through September on a 3MMA basis. The […]
In an article last week, I overstated the amount of quota Brazil had for Galvalume. One of the other traders/mills was nice enough to provide me the accurate data. The yearly quota on AZ is 49,974.44 metric tons. The other flat rolled and plate product quotas out of Brazil are as follows: Hot rolled = […]
Priefert Manufacturing Co. is one of hundreds that have applied for exclusions from U.S tariffs on steel products they can’t source domestically. Priefert’s experience, much like so many others, is a case study in frustration. Based in Mt. Pleasant, Texas, Priefert is both a service center and a manufacturer of ranching equipment. The company filed […]
In the cyclic environment of the steel industry, the best time to sell your company is when you are at the top of your game, said Vincent Pappalardo and Justin Wolfort of advisory firm Brown, Gibbons Lang & Co. Addressing service center executives at the Association of Steel Distributors regional meeting last week in Cleveland, […]
CSN continues to export slabs and coated steels to the United States, but tariffs and quotas make the market a challenge for the Brazilian steelmaker, reports a Steel Market Update source. Earlier this year, Steel Dynamics bought the CSN conversion mill in Terre Haute, Ind. At the time of the purchase, the company had two […]
Despite moderating prices, the outlook for the U.S. steel market is generally favorable for 2019, reported Josh Spoores, CRU Principal Analyst for North America, during a CRU Webinar on Friday. The Trump administration’s Section 232 steel tariff has limited competition from steel imports this year. Steel sheet arrivals into the U.S. are down 12 percent […]
I am back in my office after four very long days, mostly due to long and late flights to Minnesota, Pittsburgh and back to West Palm Beach. I will be in the office for most of the day on Friday should you need to reach me. I am off again on Sunday as I head […]
On Friday, Steel Market Update received a note from one of our readers asking why foreign steel import totals have not dropped. The domestic mills have won countless antidumping and countervailing duty suits against flat rolled and plate products. The president has placed 25 percent tariffs on steel, citing national security as the reason to […]
In the last month, eight of the 16 currencies that Steel Market Update tracks were down against the dollar and eight were up. This was a dramatic change from the May-August period when few of the 16 appreciated against the dollar (just one in May, two in June, three in July and two in August). […]
The following article is regularly published for our Premium users, but we decided to share it with our entire readership this month. If you are interested in upgrading to a Premium subscription, contact us at info@SteelMarketUpdate.com or 800-432-3475. Oil and gas prices have stabilized, oil inventories are declining and the number of operating rigs exploring […]
Steel Market Update is sharing this Premium-level content with all readers this month. For more information on how to upgrade to a Premium subscription, email info@SteelMarketUpdate.com. Oil production in the U.S. hit another all-time high in July, but the number of operating rigs exploring for oil and gas has not changed much in 3½ months. […]
Oil production in the U.S. set another all-time record in August and stocks are increasing. In the last month, the price of oil has dropped by $16/barrel. Wall Street Breakfast had this to say on Nov. 9: “Oil fell below the $60 level overnight, a day after slipping into a bear market. That means U.S. […]
Distributors of products for the HVAC sector are keeping a tight rein on inventories as pricing for galvanized steel continues to weaken. The wholesalers are seeing pressure from customers postponing orders in anticipation of better prices down the road. “It appears customers are living hand to mouth, waiting to place any large orders until they […]
Steel Dynamics is expecting third-quarter profitability to exceed second-quarter results, based on strong underlying demand and meaningful metal spread expansion. Average price for steel products is outpacing scrap costs for the quarter resulting in increased profitability for SDI’s sheet and long product steel operations. “Based on strong steel demand fundamentals and customer optimism, the company […]
This article is regularly published for our Premium users, but we decided to share it with our entire readership this month. If you are interested in upgrading to a Premium subscription, contact us at info@SteelMarketUpdate.com or 800-432-3475. Carbon steel tubular products have a rate of price escalation much higher than plastic products. This is also […]
Nucor is expecting earnings to improve from second to third quarter at its sheet and plate mills, despite weather-related outages at some locations. Lower sequential earnings are forecast at its steel products segment. Decreased performance at Nucor’s scrap brokerage and processing operations and at the Louisiana DRI facility will result in lower earnings for the […]
This analysis breaks down the imported tonnage of six flat rolled products into the district of entry and the source country. We believe that misinformation (or lack of) about local import volumes is often used to influence purchase decisions. Our intent with this analysis is to describe in detail what is going on in a […]
Steel Market Update is sharing the following Premium-level content on flat rolled imports with Executive-level members. For more information about upgrading to a Premium-level subscription, contact info@steelmarketupdate.com. This analysis breaks down the imported tonnage of six flat rolled products into the district of entry and the source country. We believe that misinformation (or lack of) […]
Premium subscribers to Steel Market Update have access to reports on our website that break out the import tonnage into district of entry and source nation for six sheet and plate categories. SMU has now developed reports that drill down the HRC and CRC into product detail both nationally and for each district. We report […]
Charlotte-based Nucor Corp. will suspend operations at its sheet mill in Berkeley, S.C., and its plate mill in Hertford, N.C., in anticipation of Hurricane Florence. Operations began shutting down on Wednesday and will restart after the storm passes, said Nucor spokesperson Katherine Miller. “At Nucor, safety is our top priority…. We are closely monitoring the […]
Steel Market Update steel training workshops continue to be very popular. We are finding many companies sending their new people to our flagship Steel 101 workshop. This workshop is excellent for those new to the industry; however, it is not just for new employees. It is an excellent way to expand the knowledge base of […]
Nucor Corp. announced plans to invest $650 million to expand the production capability at Nucor Steel Gallatin. The upgrade would increase the Kentucky flat rolled sheet mill’s capability to 3.0 million tons annually from its current level of 1.6 million tons. In addition, the maximum coil width would be increased to 73 inches. The facility […]
Section 232 tariffs on steel and aluminum products from Canada and Mexico are back in the spotlight now that NAFTA talks are, hopefully, nearing an end. Steel associations from Canada and Mexico are calling for the tariffs to be terminated while the negotiations are under way. Mexican association Canacero has stated that a NAFTA deal […]
Are the Section 232 tariffs affecting the volume of steel imports? We will look at this several different ways, as the answer depends on what time frame is chosen for comparison. Commerce Secretary Wilbur Ross said on Aug. 10 that since the imposition of Section 232 tariffs in March, imports to the U.S. have declined […]
The Trump administration tariffs have had the expected effect on steel imports and steel pricing this year, but prices for hot rolled coil and plate could moderate a bit next year as economic growth slows and the cost of steelmaking raw materials begins to decline, forecasts Josh Spoores, principal steel analyst for the CRU Group. […]
United Steelworkers have not reached a collective bargaining agreement with ArcelorMittal or U.S. Steel with just one day remaining before the current contracts expire. As union officials consider their options, including a possible strike, marches and rallies were planned for Thursday, Aug. 30, at ArcelorMittal and U.S. Steel locations to show union solidarity. “Steelworkers have made […]
The Nucor Sheet Mill Group and USS-POSCO Industries have notified customers of changes in their coating extras as a result of lower zinc prices. The announcements follow on a similar letter to customers from California Steel Industries (CSI) last week. Nucor’s Aug. 30 letter stated: “Consistent with our practice to monitor the cost of zinc, […]
The spot price of West Texas Intermediate (WTI) has been erratic in the last four months with two brief spikes above $70 per barrel. The oil price was $66.50 on Aug. 20. The total number of operating rigs exploring for oil and gas was up by 11.7 percent year over year and increased by nine […]