As widely expected, Nucor was the first to announce another $40 increase in flat rolled steel prices today. Other steelmakers are likely to follow suit. This represents the fifth round of price hikes by the major mills since late October totaling around $190 per ton. In a letter dated Jan. 8, Nucor’s Sheet Mill Group […]
By CRU Analysts, from CRU’s Bulk Ferroalloys Monitor U.S. finished steel prices have risen following price increase announcements that found support from service center restocking. Adding to this price support was the scrap market, where scarcer supply and increased mill demand put prices on an upward trajectory. Some steel products have enjoyed quicker price gains […]
Steel Market Update is pleased to share this Premium content with Executive level members. For more information on how to upgrade to a Premium-level subscription, email Info@SteelMarketUpdate.com. Key Market Indicators showed a substantial improvement in market trends in the December data. This report is designed to be a big picture summary of data SMU has […]
Key Market Indicators showed a substantial improvement in market trends in the December data. This report is designed to be a big picture summary of data SMU has reported in detail during the month. It summarizes 36 data streams that describe the state of the steel market and provide forward guidance for steel buyers and […]
By CRU Chief Economist Jumana Saleheen, from the CRU Steel Sheet Products Market Outlook Global Economic Outlook: 2019 has been an eventful year. Many decisions were taken, including tariffs and monetary policy easing. Other decisions were put-off, such as Brexit and auto tariffs. Looking back to our expectations at the start of 2019, four things […]
By CRU Analyst Sam Grant, from CRU’s Zinc Monitor The North American market (U.S., Canada and Mexico) accounts for approximately 9.6 percent of global refined zinc demand. This year, we have seen a sharp slowdown in both global trade and industrial production, with the North American region experiencing its slowest rate of IP growth since […]
Based on Steel Market Update’s analysis of 10 indicators, there is a faint glow in the manufacturing environment. This report summarizes 10 data streams that describe the state of U.S. manufacturing in general and the steel industry in particular. We have reported on most of these separately in our Steel Market Update publications, and therefore […]
Crude oil prices broke out to the upside in December, but the rig count continues to decline. U.S. exports of crude oil and petroleum products, including gasoline, diesel, jet fuel, naphtha, and many others, exceeded imports in September by 89,000 barrels a day, the Energy Information Administration (EIA) reported on Nov. 28. Thus, the U.S. […]
U.S. Steel announced today that it intends to “indefinitely idle” a significant portion of its Great Lakes Works operation near Detroit. The decision was made to better align the company with its three core flat rolled operations and advance its “best of both strategy” as an integrated and EAF company. U.S. Steel expects to begin idling […]
U.S. Steel announced today that it intends to “indefinitely idle” a significant portion of its Great Lakes Works operation near Detroit. The decision was made to better align the company with its three core flat rolled operations and advance its “best of both strategy” as an integrated and EAF company. U.S. Steel expects to begin idling […]
Nucor Steel says it will add a new coil paint line at its Mississippi County sheet mill in Arkansas. The new coil paint line will have a capacity of 250,000 tons per year and is expected to start up in the first half of 2022. “The new coil paint line will diversify our product and […]
By CRU Prices Analyst George Pearson, from the CRU Steel Sheet Products Monitor Sheet prices in the U.S. were mixed this week. HR coil at $555 was steady w/w, falling by $2 /s.ton, while CR and HDG coil products gained $26-30 /s.ton w/w after steadying last week. For HR coil, overall volume has picked back […]
By CRU Principal Analyst Matthew Watkins, from the Steel Sheet Products Market Outlook The European Green Deal for the EU was launched on Dec. 11 by the new European Commission. This is a strategy that aims both at achieving zero net emissions of greenhouse gases by 2050 and at managing the transition to that state […]
Steel Market Update is pleased to share this Premium content with Executive-level subscribers. For information on how to upgrade to a Premium-level subscription, email Info@SteelMarketUpdate.com. Steel production in the U.S. in 2018 was the highest since 1981, according to the World Steel Association, which released its statistical yearbook for 2018 on Dec. 16. Crude steel […]
As widely expected, Nucor and U.S. Steel raised their flat rolled prices by $40 per ton on Monday, effective immediately on new spot orders, following on a comparable announcement by ArcelorMittal USA on Friday. NLMK USA is reported to be following suit, but has not issued a written announcement. USS-POSCO Industries (UPI) raised its base […]
Affirming that steel imports from Vietnam have been circumventing U.S. antidumping and countervailing duties, the Department of Commerce on Monday upheld its preliminary AD/CVD rates on imports of galvanized and cold rolled sheet from Vietnam manufactured with hot- or cold-rolled substrate from Korea and Taiwan. Steel products produced in Korea and Taiwan, shipped to Vietnam […]
Steel Market Update’s analysis of flat rolled and plate inventories and shipments for the month of November: Flat Rolled = 51.1 Shipping Days of Supply Plate = 56 Shipping Days of Supply Flat Rolled Sheet steel inventories increased in November, and the SMU Service Center Inventories Report shows that service centers have an abundance of […]
On Friday afternoon of this past week, ArcelorMittal USA began advising their flat rolled clients of their intention to raise sheet prices by $40 per ton. AMUSA customers were advised by phone and by email that base prices of hot rolled, cold rolled and coated products would increase effective immediately. At the same time, AMUSA […]
Steel Market Update offers a comprehensive series of import reports ranging from the first look at licensed data to the very detailed look at volume by district of entry and source nation. The report you are reading now is designed to plug the gap between those two. National level import reports do a good job […]
Steel Market Update offers a comprehensive series of import reports ranging from the first look at licensed data to the very detailed look at volume by district of entry and source nation. The report you are reading now is designed to plug the gap between those two. National level import reports do a good job […]
In October, demand for sheet products declined by more than the seasonal norm. Demand for long products is softening as construction expenditures decline. This analysis by Steel Market Update is based on steel mill shipment data from the American Iron and Steel Institute (AISI) and import-export data from the U.S. Department of Commerce (DoC). The […]
New rounds of flat rolled price increases began on Friday with ArcelorMittal USA and NLMK USA taking the lead at $40 per ton. My expectation is the other mills will follow on Monday and Tuesday of this week. Watch lead times – with some of the mills they are beginning to stretch. Steel Dynamics has […]
Changes may be coming for two joint ventures held by Brazilian mining giant Vale, including California Steel Industries. Vale is looking to trim costs as it continues to make reparations stemming from the Brumadinho tailings dam collapse that took 270 lives and caused major environmental damage to the region. At Vale Day on Dec. 2 […]
This Steel Market Update report examines the import share of sheet, plate, long and tubular products and 16 subcategories. Since January, there has only been one month when the import market share of total sheet products exceeded 15 percent. The import share of HRC has been below 10 percent since January. The most striking result […]
Nucor is expecting its earnings to decrease in the fourth quarter, according to just released guidance estimates. Earnings are expected in the range of $0.25 to $0.30 per diluted share, down from third-quarter earnings of $0.90 per share. Nucor’s steel mills segment will be impacted in the fourth quarter by lower steel prices that occurred […]
The United States, Mexico and Canada have finally reached consensus on a new North American trade agreement. In an announcement on Tuesday, the office of U.S. Trade Representative Robert Lighthizer said the USMCA “will support mutually beneficial trade leading to freer markets, fairer trade, and robust economic growth in North America.” Lighthizer and Canadian Deputy […]
On Friday, SSAB announced another plate price increase. Plate buyers were putting the new “aim to” base price around $700 per ton. Plate prices have been stubborn to move higher. SMU will watch momentum carefully this week to see if prices have finally turned the corner. This weekend I am in New Orleans attending HARDI’s […]
By CRU Prices Analyst George Pearson, from CRU’s Steel Sheet Products Monitor Sheet prices in the U.S. have risen at a strong rate, yet the underlying volume behind the prices is near the lowest level for the year. This low volume may be attributed to the holiday-shortened week, but more likely it reflects the fact […]
November’s licensed import volume of total rolled steel products was the lowest since February 2010. Year over year, total rolled product imports in November were down by 27.4 percent on a three-month moving average (3MMA) basis. This follows the 17.7 percent decrease in October and 15.5 percent decline in September on the same basis. This […]
Service has been restored to the largest of the blast furnaces, and a second furnace will be back online shortly, following a water pipe break Nov. 27 that forced U.S. Steel to shut down all three operating furnaces at its Gary Works mill. In an update on Monday, a spokesperson said the third furnace is […]