By CRU Principal Analyst Josh Spoores, from CRU’s Steel Sheet Products Market Outlook In less than a year Cleveland-Cliffs has transformed themselves from a Great Lakes-based iron ore miner to the largest fully integrated flat rolled steel producer in the USA. Cliffs has done this by acquiring AK Steel earlier this year and now they […]
By CRU Senior Cost Economist Ross Cunningham and CRU Research Analyst Eric Lucking, from CRU’s Global Steel Trade Service At CRU, we forecast the exchange rates for all the countries where our relevant commodities are produced. Our short and medium-term view is reviewed each quarter. This is anchored to our long-term forecast, which uses a […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: Tariffs are coming at us from every direction, it seems like. Tariffs are taxes, as we hear a lot. Some taxes are predictable, but those on China, steel, aluminum, washing machines and solar panels tend to be vastly […]
Following on the heels of plate price increases earlier this week, the mills have announced another $50 increase on flat rolled. On Wednesday, Nucor’s Sheet Mill Group notified customers that it is increasing base prices on new orders of hot rolled, cold rolled and galvanized products by a minimum of $50 per ton, effective immediately. […]
Recovery, fundamental, opportunity, strategic, exciting. These are the five words steel executives used during AIST’s Virtual Town Hall Forum Wednesday to describe the current state of steel. In the aftermath of an unprecedented upheaval for the economy and the industry caused by the COVID-19 crisis, executives from Big River Steel, Cleveland-Cliffs, Nucor, Steel Dynamics and […]
ArcelorMittal’s divestment of U.S. assets to Cleveland-Cliffs completes the company’s $2 billion asset portfolio optimization and strategically repositions its North American platform. “This transaction is a unique opportunity for ArcelorMittal to unlock significant value for shareholders while retaining exposure to the North American economy through our high-quality NAFTA assets alongside a participation in what will […]
From the CRU weekly Steel Monitor: Most Chinese product prices were either unchanged or marginally lower this week, except for HR coil, that has fallen RMB220 /t ($32 /t) over three weeks. Although this keeps Chinese prices at a relatively high level, it has created caution and may now indicate a limit to how far rallies in […]
Editor’s note: SMU Contributor David Feldstein is president of Rock Trading Advisors. David has over 20 years of financial market trading experience and has been active in the ferrous futures space for eight years. David earned an MBA from the University of Chicago Booth School of Business with concentrations in economics, statistics and analytical finance. […]
Wholesalers who sell HVAC and galvanized steel products to the construction sector have been pleasantly surprised by the resilience of demand in a market dealing with the COVID pandemic. They have been downright shocked by the spike in galvanized steel prices, which have jumped by about $7/cwt or $140 per ton in just the past […]
Wholesalers who sell HVAC and galvanized steel products to the construction sector have been pleasantly surprised by the resilience of demand in a market dealing with the COVID pandemic. They have been downright shocked by the spike in galvanized steel prices, which have jumped by about $7/cwt or $140 per ton in just the past […]
Galvanized steel prices have skyrocketed by more than $200 per ton since August, leaving wholesalers who serve the HVAC market to wonder how much higher the price can possibly go before it begins to cut into demand. On a conference call this morning, members of the Heating, Air Conditioning & Refrigeration Distributors International (HARDI) said […]
Demand remains strong even as galvanized steel prices have topped $900 per ton, reported members of the Heating, Air Conditioning & Refrigeration Distributors International in a conference call this morning. But the HARDI members—wholesalers who serve the HVAC market—expressed concern about the tight availability of galvanized steel and fear of running low on supplies. “We are […]
By CRU Prices Analyst Estelle Tran, from CRU’s Global Steel Trade Service A combination of increased seasonal demand, low service center inventories, unplanned outages, spike in scrap prices and government restrictions on Brazilian slab imports have added fuel to the usual seasonal uptick and turned it into a surge. After reaching a bottom in mid-August, […]
Steel Market Update is pleased to share this Premium content with Executive members. For information on upgrading to a Premium-level subscription, email Info@SteelMarketUpdate.com. Following is an analysis of Bureau of Labor Statistics (BLS) Producer Price Index data. The PPI is a family of indexes that measure the average change over time in the prices received […]
Flat Rolled = 48.6 Shipping Days of Supply Plate = 56.9 Shipping Days of Supply Flat Rolled Service centers’ flat rolled steel supply reached its lowest point of the year in August, as shipments increased and intake remained nearly flat month on month. In August, service centers carried 48.6 shipping days of supply of flat […]
Demand and pricing improved late in the third quarter, said Nucor in earnings guidance issued Thursday. Continued resiliency of the nonresidential construction market has resulted in a strong performance for Nucor’s downstream products. Steel segment earnings are expected to be similar to second quarter. Nonresidential construction is also benefiting Nucor’s bar and structural mills, but market conditions […]
By CRU Analyst Kevin Bai, from CRU’s Steel Sheet Products Monitor Domestic sheet prices in China continued to reach new highs for the year alongside further improvement in underlying sheet demand in combination with limited supply. Domestic CR coil prices went up by RMB290 /t to RMB4720 /t and HDG sheet by RMB140 /t to […]
Total rolled product imports in August were down by 28.0 percent on a three-month moving average (3MMA) basis. This was the 10th consecutive month in which imports were down by more than 20 percent compared to the same time last year. This early look at August’s import volume is based on Commerce Department license data […]
Steel Market Update is pleased to share this Premium content with Executive members. The information below is excerpted from the full article, which is available to Premium subscribers on SMU’s website. For information on upgrading to a Premium-level subscription, email Info@SteelMarketUpdate.com. Total rolled product imports in September were down by 28.7 percent on a three-month […]
Mills have hiked prices on flat rolled and plate steels in the past 10 days and it appears they will collect at least a portion of the increases. Steel Market Update’s check of the market this week shows prices up as much as $30 per ton, depending on the product, on top of a $10 […]
By CRU Senior Analyst Erik Hedborg, from CRU’s Raw Materials Monitor The iron ore price has risen again in the past week as offloading activities have continued while demand from China’s steel mills has been robust. On Tuesday, Sept. 1, CRU has assessed the 62% Fe fines price at $124.5 /dmt, up by $1.5 /dmt […]
Six months of adversity was not what Leon Topalian expected when he took over the reigns of Nucor in January. But a pandemic that devastated the economy, caused demand and pricing to plummet and put the very lives of employees in jeopardy was a formidable challenge to overcome. “I’m not sure I’ve seen before in […]
The future of U.S. Steel and Big River Steel as one entity continues to excite CEOs from both companies. Speaking during the SMU Virtual Steel Summit this past week, U.S. Steel CEO David Burritt could barely contain his enthusiasm regarding the opportunities the marriage of the two companies will provide the iconic steel producer. Burritt […]
Following on a similar move by the plate mills earlier in the week, flat rolled mills announced price changes Wednesday and Thursday ranging from $40 to $60 per ton. Nucor’s Sheet Mill Group notified customers today, Aug. 27, that it has increased base prices on new orders of hot rolled, cold rolled and galvanized steel […]
California Steel Industries has appointed Shinji Tanaka as President and Chief Executive Officer. He will replace Marcelo Botelho Rodrigues who completed his four-year term on Aug. 1, 2020. Tanaka joined CSI in January 2020 as the Executive Vice President of Engineering and Continuous Improvement following a 21-year career at JFE Steel in Japan. At JFE […]
Claiming national security concerns over a slump in the U.S. steel market, President Trump issued a proclamation late Friday that appears to amend the quota limits on Brazil, further restricting steel imports from South American nation. While it’s unclear at this point which products will be affected and to what degree, one source tells SMU […]
Prices for flat rolled steel products moved up by as much as $20 per ton in the past week, while plate increased by $10, according to Steel Market Update’s check of the market on Monday and Tuesday. SMU’s Price Momentum is higher on sheet products, but Neutral on plate products, as the plate mills’ price […]
By CRU Prices Analyst Estelle Tran, from CRU’s Global Steel Trade Service U.S. sheet steel prices hit their lowest point of the year on Aug. 12 and are slated to rise as steel consumption has been increasing. Steel mill capacity utilization reached 61.5 percent in the week ended Aug. 15, up from 60.4 percent the […]
The latest CRU Global Economic Outlook indicates that Mexican auto production will not reach 2019 levels until 2023, with expectations that 2020 volumes will be down about 23 percent in 2020 and recover 19 percent in 2021. There is some near-term upside to the Mexican market as production returns to normality after the Covid-19-related shutdowns, […]
By CRU Prices Analyst George Pearson, from CRU’s Steel Monitor Sheet prices in the U.S. Midwest market were led lower by declines in HR and CR coil. The price of HR coil is now back down to the low reached in early May, though market participants have noted that low priced offers have become scarce. […]