Hot-rolled coil (HRC) imports remain at a discount to domestic hot band, though the US premium has declined to its lowest margin in over three months, according to SMU’s latest foreign vs. domestic price analysis. While both offshore and US product continue to decline, domestic HRC just saw its sharpest week-on-week (WoW) fall year to date, […]
Hot-rolled coil (HRC) imports remain at a discount to domestic hot band tags as both offshore and US product continue to decline at a similar rate, according to SMU’s latest foreign vs. domestic price analysis. Even as domestic tags have been on a seven-week decline, HRC imports have fallen at a comparable rate, keeping US hot […]
The US and EU affirmed their intention to reach a common framework on carbon emissions in steel and aluminum by October at the Trade and Technology Council (TTC) meeting in Luleå, Sweden, on Wednesday. At the meeting the EU and US said that via the Transatlantic Initiative for Sustainable Trade they are “strengthening engagement towards […]
The US will extend for another year an exemption for Ukrainian steel from Section 232 tariffs. “The United States has provided a much-needed market for the steel that Ukraine is able to export,” Commerce Secretary Gina Raimondo said in statement on Wednesday, May 31. “In doing so, Americans are directly supporting the people of Ukraine, […]
Swedish steelmaker SSAB is urging ambitious standards for the steel industry’s transition to green steelmaking as the EU-US Trade and Technology Council (TTC) meeting takes place in Luleå, Sweden, on May 30-31. Martin Lindqvist, president and CEO of SSAB, said that to succeed in the transition, effective frameworks, political leadership, and action are needed. “It is also […]
Foreign cold-rolled coil remains much less expensive than domestic CRC even as prices in the US fall roughly in tandem with those abroad, according to SMU’s latest check of the market. Domestic CRC was, on average, $77 per ton ($3.85 per cwt) more expensive than imported steel in the four regions we track as recently as early February. […]
Two separate developments suggest that the Biden administration may have concerns that more tariffs would damage the US economy by harming consumers. First, we saw the president suspend action to impose additional tariffs on solar cells and modules from four countries in the face of an antidumping “circumvention” proceeding. Circumvention determines whether operations in third […]
A lot of steel companies are talking about being carbon neutral by 2050. But how are we going to get there? And how do we get the rest of the world to come with us? As we proceed with decarbonization, what actually qualifies as “green steel,” and who gets to decide? A conversation today with Kevin […]
Hot-rolled coil (HRC) imports are lingering at a notable price discount to domestic hot band tags despite repeated price decreases in the US market, according to SMU’s latest foreign vs. domestic price analysis. Domestic tags are still markedly more expensive than imported product, as both offshore and US steel prices continue to ease. The price advantage domestic […]
Jeremy Flack, founder and CEO of Flack Global Metals, joined Steel Market Update for a Community Chat on May 17 where he spoke about his involvement in futures trading, risk management, and the new arm of the organization, Flack Manufacturing Investments. Flack discussed the state of the market for the past three years with SMU’s […]
Lourenco Goncalves, Cleveland-Cliffs’ chairman, president, and CEO—as well as the newly elected AISI chairman—and Kevin Dempsey, AISI president and CEO, discussed issues ranging from Section 232 tariffs and hydrogen in steelmaking, to steel imports from Mexico, along with a host of other topics on Tuesday at the American Iron and Steel Institute (AISI) General Meeting press […]
Executives from leading US steel companies sat down to discuss some of the challenges ahead of what appears to be a very bright future for the industry at AISTech 2023’s Town Hall Forum in Detroit on Wednesday, May 10. Panelists included Traci L. Forrester, Cleveland-Cliffs’ EVP, environmental and sustainability; Richard L. Fruehauf, SVP – chief […]
The Congressional Steel Caucus (CSC) has urged the US Department of Commerce and the US Trade Representative to take action to address what it calls a “surge of Mexican steel imports” into the US. The CSC claims the imports are in violation of the US and Mexican 2019 Joint Statement on Section 232 Duties on Steel and Aluminum, […]
Hot-rolled coil (HRC) imports remain a feasible alternative despite repeated price decreases in the US market, according to SMU’s latest foreign vs. domestic price analysis. Domestic tags are still notably more expensive than imported product, as offshore steel prices and US prices decline in tandem. The price advantage domestic HRC had enjoyed over imported material as recently […]
Hot-rolled coil (HRC) imports remain attractive to US buyers despite the current price correction in the domestic market, according to SMU’s latest foreign vs. domestic price analysis. Domestic tags are still significantly more expensive than imported product, namely because offshore steel prices are declining concurrently with US tags. The price advantage domestic HRC had enjoyed over imported […]
Our hot-rolled coil price slipped modestly again this week. That wasn’t a surprise given the trends we’ve outlined in our newsletters over the last few weeks – shorter lead times, increased domestic output, and mills more willing to negotiate lower prices. Declines often aren’t modest for long. Could we see bigger drops in two weeks […]
We’ve written in SMU about “green” steel and whether steel consumers, including market-leading OEMs, will pay a premium for it. What about the potential for premiums in scrap too? Maybe not for green scrap. But what about for “prime grade” or prime-equivalent shredded scrap? Shred that transforms into prime – maybe we could call it […]
The United States and European Union are quarrelling about several trade issues. None is more far-reaching than the trade impact of measures to address climate change. While some still doubt the need or ability of the world’s nations to tax or subsidize their way out of human-caused global warming, governments, at least in Europe and […]
Hot-rolled coil (HRC) imports remain attractive, even as US price gains have slowed, according to SMU’s latest foreign vs. domestic price analysis. And while domestic tags continue to inch higher, they remain well behind the targeted base price of $1,300 per ton ($65 per cwt) for HRC issued by Cleveland-Cliffs back on April 3. The price […]
We’ve reached a milestone on the trade litigation front. Nearly all the cases (save two) have been decided regarding the legality of Section 301 tariffs on China and of Section 232 tariffs (and other measures) on steel and aluminum. The US government has prevailed. The Supreme Court last week declined to review one of the […]
The wide spread between foreign and domestic cold-rolled coil (CRC) prices remains in place despite recent price increases in Europe, according to SMU’s latest check of the market. Domestic CRC was, on average, $77 per ton more expensive than imported steel in the four regions we track as recently as early February. That premium has […]
The appeal for imports of hot-rolled coil (HRC) remains strong even as US price gains have slowed, according to SMU’s latest foreign vs. domestic price analysis. And while we haven’t seen an official mill pricing notice in nearly three weeks, domestic tags continue to inch higher towards the targeted base price of $1,200 per ton […]
Foreign cold-rolled coil’s (CRC) pricing advantage over domestic product widened this past week as US prices rose further in response to continued mill tag hikes, according to Steel Market Update’s latest foreign vs. domestic price analysis of the CRC market. The move continues to widen the gap between US and offshore cold-rolled. Longer lead times […]
The LME aluminum three-month price steadied this week despite a whirlwind of upsetting news, finding its footing near $2,300 per metric ton. That’s below the $2,500-per-ton mark we saw as 2023 opened on a more optimistic tone. The recent news from across the geopolitical and macroeconomic scene has dampened demand sentiment in the near term. […]
The appeal for imports of hot-rolled coil (HRC) continues to grow as US prices move higher in response to repeated mill tag hikes. The price advantage domestic HRC had enjoyed over offshore just last month has swung negative at an accelerated rate, according to SMU’s latest foreign vs. domestic price analysis. The most recent pricing […]
Imports of cold-rolled coil (CRC) extended their pricing advantage over domestic product as US mills continued to drive prices higher, according to Steel Market Update’s latest foreign vs. domestic price analysis of the CRC market. US mills have announced multiple rounds of price increases since the beginning of the year, widening the gap between US […]
The US International Trade Commission issued a report to Congress last week on the impact of the Section 232 import restrictions on steel and aluminum and the tariffs on imports from China under Section 301. The report catalogued significant injury to downstream industries. Namely, those that use steel or aluminum in manufacturing. The losses were […]
The US Court of Appeals for The Federal Circuit has upheld Section 232 duties on steel tube and pipe from Turkey’s Borusan Mannesmann and its American subsidiary Borusan Mannesmann Pipe US. In a March 15 ruling the court affirmed an earlier opinion by the US Court of International Trade. Borusan had appealed the original decision, […]
Imports of hot-rolled coil (HRC) are becoming more attractive as US mills continue to drive domestic prices higher. The price advantage domestic HRC had enjoyed over offshore hot band as recently as five weeks ago swung negative, mirroring dynamics seen more than a year ago, according to Steel Market Update’s latest foreign vs. domestic price […]
The LME aluminium three-month price eased lower again last week and was seen trading Friday at around $2,300 per tonne. Still below the high mark for 2023, recent news from the macroeconomic scene has dampened demand sentiment and prices accordingly. Market participants awaited Jerome Powell’s semi-annual congressional testimony, with Friday’s focus the nonfarm payrolls report. […]