Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: On Friday, President Trump issued another proclamation on steel and aluminum. This time, the proclamation imposes tariffs on selected “derivative” products made from steel and aluminum. I was reminded of the movie “The Monster that Devoured Cleveland,” which […]
On Thursday I provided some of the feedback I was getting from those involved in both the sales and purchasing of flat rolled steel into the North American markets. The comments continued to flow in and here are a couple more that I found interesting: The general manager of a service center provided these insights […]
U.S. manufacturers have requested a total of 93,933 exclusions from steel tariffs and 13,249 exclusions from aluminum tariffs since the Trump administration imposed Section 232 in 2018. To get an exemption, an applicant must make the case that the metal they require is not available domestically in a sufficient quality or quantity. While Commerce has […]
Looking back on 2019, it’s difficult to assess the success of Trump’s tariffs. A case for their effectiveness can be made either way. Judging by one measure, imports, it certainly appears the tariffs did their job. The American Iron and Steel Institute estimates that total steel imports declined by approximately 17.9 percent in 2019 to […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: Challenges to the Section 232 steel tariffs are intensifying lately. The cases raise issues going to the heart of the Section 232 import restrictions. Here is a summary of the court cases to watch: AIIS—challenging the constitutionality of […]
December’s licensed import volume for rolled steel products was the lowest since December 2009. Year over year, total rolled product imports in December were down by 27.8 percent on a three-month moving average (3MMA) basis. This follows the 27.4 percent decrease in November, 17.7 percent decrease in October and 15.5 percent decline in September on […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: We are now in the third year of the steel tariffs. On Jan. 11, 2018, the Department of Commerce transmitted its report and recommendations to President Trump. The president was waiting for the document, which gave him power […]
Allegheny Technologies’ Midland plant may be on the chopping block if the Trump administration doesn’t approve an exclusion from Section 232 tariffs. ATI CEO Robert Wetherbee, in an op-ed for the Wall Street Journal, demonstrated how difficult it can be to support Trump trade policies and one’s own business interests. Wetherbee believes the tariffs were […]
Commercial Metals Company is looking forward to a steady construction market in 2020 for its merchant bar and rebar products. “We are positioned to continue benefiting from the positive trends in our core markets and remain optimistic about the construction market, as many of the macro indicators we monitor point to resilience ahead,” said President […]
By CRU Analysts, from CRU’s Bulk Ferroalloys Monitor U.S. finished steel prices have risen following price increase announcements that found support from service center restocking. Adding to this price support was the scrap market, where scarcer supply and increased mill demand put prices on an upward trajectory. Some steel products have enjoyed quicker price gains […]
A recent study by the Federal Reserve concludes that the Trump administration tariffs are doing more harm than good to the U.S. economy and manufacturing. Federal economists Aaron Flaaen and Justin Pierce examined the impact the “unprecedented” number of tariffs imposed under the Trump administration have had on the U.S. manufacturing sector. Escalation of tariff […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: Happy New Year to all. The president has imposed a host of import restrictions and sanctions since 2017. The list is extensive and the statutes under which he claims to be acting can be bewildering: Section 232, Section […]
In Q3 2019, Vietnam was second only to Turkey as a buyer of scrap on the global market. This Steel Market Update quarterly analysis uses data from the Iron and Steel Statistics Bureau (ISSB) in the UK. We believe that to improve our understanding of the gyrations of the domestic scrap market, we should be […]
President Trump is walking back his decision to impose tariffs on steel and aluminum imports from Brazil. After accusing Brazil and Argentina earlier this month of currency manipulation that is harming U.S. farmers, and threatening immediate tariffs in retaliation, Trump now says he will not follow through on his threat. Brazilian President Jair Bolsonaro said […]
Fitch Ratings, a global leader in credit ratings and research, is forecasting a negative outlook for the global steel industry in 2020 and challenging conditions in North America. The Fitch Ratings 2020 Outlook: Global Steel notes weaker economic growth impacted by ongoing trade and geopolitical tensions. “Over the past two years companies have talked at […]
By CRU Analyst Sam Grant, from CRU’s Zinc Monitor The North American market (U.S., Canada and Mexico) accounts for approximately 9.6 percent of global refined zinc demand. This year, we have seen a sharp slowdown in both global trade and industrial production, with the North American region experiencing its slowest rate of IP growth since […]
Members of the Precision Metalforming Association are a bit more positive about business conditions for 2020. The December PMA Business Conditions Report shows an uptick in the percentage of survey participants who predict an improvement in economic activity during the next three months, while also noting a decline in current average daily shipping levels. The […]
A new report by the World Trade Organization shows trade restrictions by WTO members are at historically high levels. Between mid-October 2018 and mid-October 2019, the trade coverage of import-restrictive measures implemented by members was estimated at $747 billion, an increase of 27 percent from the prior year and the highest level since October 2012. […]
Changes may be coming for two joint ventures held by Brazilian mining giant Vale, including California Steel Industries. Vale is looking to trim costs as it continues to make reparations stemming from the Brumadinho tailings dam collapse that took 270 lives and caused major environmental damage to the region. At Vale Day on Dec. 2 […]
Total steel imports into the United States are trending toward 2.5 million tons in December, which would be up dramatically over November and higher than the 12-month average. However, imports of semifinished steels, some of which are subject to quota restrictions, are likely to come in well under the current trend of 1.1 million tons. […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: I have received questions from several people about the ins and outs of product exclusions. I thought I’d give a brief summary of the subject and the opportunities and the problems that may arise. Section 301 (China) Product […]
In the spirit of the season, Keith Gunter of McElroy Metal offers the following poetic look back at the year in steel: ‘Twas almost Christmas and all through the land, Steel increases were announced but will they all stand? Buyers are wary as steel mills try to pounce, Is this for real, or just […]
Editor’s note: President Trump’s surprise decision to impose 25 percent tariffs on steel and aluminum imports from Argentina and Brazil stunned the industry and leaves many questions unanswered. Paul Nathanson, executive director of the Coalition of American Metal Manufacturers and Users (CAMMU), addressed the issue in the following op-ed: President Trump announced via tweet on Monday that […]
November’s licensed import volume of total rolled steel products was the lowest since February 2010. Year over year, total rolled product imports in November were down by 27.4 percent on a three-month moving average (3MMA) basis. This follows the 17.7 percent decrease in October and 15.5 percent decline in September on the same basis. This […]
John Packard is traveling…. With President Trump making more headlines this week with his tweet calling for new tariffs on steel from Brazil and Argentina, the timing seems right to ask the question: Have the Section 232 tariffs helped your business? Your industry? Your country? Obviously, that depends entirely on the criteria each individual selects […]
President Trump stunned the market with an early-morning tweet Monday calling for new Section 232 tariffs on steel imports from Brazil and Argentina, which he accused of currency manipulation. No word yet on whether the White House will make the tariffs official, or even if they would be legal. But the prospect of higher priced […]
By CRU Principal Analyst Josh Spoores, from the CRU Steel Monitor President Trump sent three tweets this morning that said, effective immediately, he would restore the steel and aluminum tariffs on Brazil and Argentina because the countries “have been presiding over a massive devaluation of their currencies, which is not good for our farmers.” No […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: As the Section 232 tariffs continue, their market effects continue to pile up. The tariffs cause effects on investment and employment, both for steel producers and their customers. Tariffs reduce imports of steel, for example, but they increase […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: As the Section 232 tariffs continue, their market effects continue to pile up. The tariffs cause effects on investment and employment, both for steel producers and their customers. Tariffs reduce imports of steel, for example, but they increase […]
SMU contributor Gaurav Chhibbar is a partner at Metal Edge Partners, a firm engaged in Risk Management and Strategic Advisory. In this role, he and his firm design and execute risk management strategies for clients along with providing process and analytical support. In Gaurav’s previous role, he was a trader at Cargill spending time in […]