Nucor lowered its consumer spot price (CSP) for hot-rolled (HR) coil by another $10 per short ton (st) for the first week of July. The steelmaker said in a letter to customers on Monday that its CSP base price for the week will be $670/st for all of its sheet mills with the exception of California Steel Industries (CSI).
Low global sheet demand continued to weigh on prices around the world this week. In the US, mills were forced to remain aggressive to secure orders during this period of demand weakness. And compounded by recent new capacity ramp-ups, has forced US hot rolled (HR) coil prices down closer to levels seen in offshore markets. […]
A roundup of aluminum news from CRU.
It was great to have Gary Stein, CEO of Triple-S Steel, join SMU for a Community Chat earlier this week. (Btw, you can find a record of the webinar here.) We covered a lot of ground. From Andrew Carnegie and the Johnstown Flood to the current steel market and the state of domestic manufacturing broadly speaking. One thing that stuck with me was how unevenly construction spending appears to be on “green” initiatives and other key items funded by infrastructure spending, the Inflation Reduction Act, and the CHIPS Act.
Worthington Steel’s earnings slipped in its fiscal fourth quarter while sales ticked up.
Mill Steel Co. has named Evan Keebler as VP of sales for its construction segment.
US sheet prices continue to fall, with SMU’s average hot-rolled (HR) coil price now at $670 per short ton (st). Prices for cold-rolled and coated products are now in the mid/high $900s/st. As I noted in my last Final thoughts, the consensus among our readers is that prices will bottom out in July. And that makes intuitive sense. Lead times in mid/late July should be stretching into the typically busier fall months. The question then is where prices bottom.
A cyberattack on CDK Global has shut down the systems at automotive dealerships and slowed down sales across the US.
Algoma executives reiterated that operations are proceeding as normal following an unplanned BF outage earlier this year.
Flatbed rates remain roughly 20% higher than dry van but have stayed relatively calm for the first half of 2024, rising just 5% in the first half of the year and remaining negative on a year-over-year basis.
Algoma Steel’s quarterly and full-year results took a hit from an unplanned blast furnace outage earlier this year. However, with a modernized plate mill and two new EAFs slated to come online by the end of this year, the Canadian flat-rolled steel producer is looking to a greener future.
Demand has remained persistently weak across the globe for sheet steel, weighing on prices. US HR coil prices fell the furthest this week as high-volume, low-priced deals were transacted as mills looked to fill order books and competed with one another amid relative demand weakness. Meanwhile, European prices were also down due to low demand […]
The US scrap market is quiet as we pass through June. Speculation about the direction of July is mixed, with most sentiment neutral or bearish. The concerns are about demand during the summer months. There are still several planned outages and other cutbacks at various mills that could limit overall demand for recycled steel scrap.
The summer doldrums are here. That means lazy days at the office, or behind the computer. Perhaps heading over to the water cooler to chat, maybe stare at a fly buzzing on a windowsill. There is work to be done, product to be made or shipped, but there’s no hurry. And around lunchtime, you hang that classic sign on the front door: Gone fishin’.
CMC reported solid demand and a healthy start to the construction season in its latest quarterly earnings statement.
Mill Steel Co. announced several executive appointments as it works to transform the organization.
Nucor priced its weekly hot-rolled (HR) coil consumer spot price (CSP) at $715 per short ton (st) this week, down $5/st from last week.
Pig iron prices have been trending higher in all key markets besides Europe. Limited exports from Brazil and Ukraine are contributing to higher prices in the USA, though soft demand cushioned a sharp price upswing. In the US, pig iron prices increased by $15 per metric ton (mt) m/m to $485/mt CFR NOLA. Buying activity […]
Friedman Industries reported lower earnings in its fiscal fourth quarter, and the company expects first-quarter margins to be lower than Q4 margins due to declining HRC prices.
US light-vehicle (LV) sales rose to an unadjusted 1.43 million units in May, up 4.8% vs. year-ago levels, the US Bureau of Economic Analysis (BEA) reported. The year-on-year (y/y) growth in domestic LV sales came in with a 7.6% month-on-month (m/m) boost.
Steel Market Update’s Steel Demand Index moved up 2.5 points last week, though it remains in contraction territory and at one of the lowest readings in nearly a year, according to our latest survey data.
Where do sheet prices go from here? How is the state of steel demand? And is the dip in prices we've seen just a case of the summer doldrums, or is it something more significant?
Now that June has arrived, the official countdown until SMU’s Steel Summit 2024 – North America’s premier flat-rolled steel conference – has begun. If you haven’t already registered, don’t delay. More than 700 attendees from more than 300 companies have already registered to be in Atlanta this August. In short, it’s poised to be another […]
It feels like the summer doldrums arrived a little earlier than usual this year. I know there had been rumors of a price hike. The prospect of a sharply lower June scrap trade probably didn't help the chances of that actually happening.
Service center group O’Neal Steel has promoted three team members to positions of regional general managers.
The suspense about the drop in ferrous scrap pricing for June has ended with Delta, Ohio-based North Star BlueScope entering the market at significantly lower numbers than most predicted.
U.S. Steel Chief Commercial Officer Kenneth Jaycox has decided to leave the company, a company spokeswoman confirmed on Tuesday. Jaycox will transition his responsibilities to Jim Bruno from now through the end of June. Effective July 1, Bruno will be in charge of the Pittsburgh-based steelmaker’s commercial operations, she said. Bruno, who joined U.S. Steel […]
US manufacturing activity contracted in May for the second month in a row, according to the latest report from the Institute for Supply Management (ISM). After a brief expansion in March, ISM’s manufacturing index has since returned to contraction, where the manufacturing sector has been for 18 of the last 19 months. The ISM Manufacturing […]
We’re just a few months away from SMU’s Steel Summit 2024 – North America’s premier flat-rolled steel conference.
Steel sheet prices across most regions of the world were little changed this week. European buyers remain cautious regarding their outlook towards end-use demand and largely remained out of the market. A similar trend was seen across Asia, although skepticism on real estate stimulus measures in China led to w/w price falls. In the US, […]