Peruvian steelmaker Corporación Aceros Arequipa S.A. (CAASA) has purchased two scrap yards in Florida to ensure it has enough raw materials for a new steel mill. The assets purchased include a shredder as well as a magnetic metal separation system, according to a notice filed with Peruvian securities regulators. Terms of the deal were not disclosed. […]
Former President Donald Trump acted within the law when he doubled Section 232 tariffs on Turkey from 25% to 50% in August 2018, a federal appeals court said. The decision by the U.S. Court of Appeals for the Federal Circuit upends a prior decision by a lower court – namely, by the U.S. Court of […]
This report examines the import share of tubular and long products shipments. Imports’ share of total tubular products rose to 47.9% in May, up from 46.6% in April. Total tubular imports rose by 6.4% month on month, while domestic shipments ticked up only slightly by 0.4% during the same period. Overall supply was up as […]
Final Census data shows that May foreign steel imports totaled 2.53 million tons, down 116,000 tons compared to the month prior, a 4% decline. Although May was down from the month prior, levels remain strong compared to recent months; April imports had reached the highest level seen since July 2020. Current June import licenses through this week […]
Schnitzer Steel Industries, Inc., posted its best results in more than a decade in its fiscal third quarter thanks to high prices and strong demand for both ferrous and nonferrous scrap. The Portland, Ore.-based scrap recycler and long steel producer recorded net income of $63.6 million in the third quarter after losing approximately $5 million […]
Ferrous scrap prices are likely to rise again in July on top of the $50-60 per gross ton increase in June – but just how much remains unclear, according to Steel Market Update sources. “July expectations vary greatly,” said one dealer in the Northeast. “Most consumers are conceding prices will be up $20-50/GT depending on grade and […]
Preliminary Census data shows that total foreign steel imports declined 5% from April to May to 2.51 million tons. Although down from the month prior, recall that April saw the highest total monthly import level since July 2020, when imports were 2.71 million tons. June import licenses through the 28th are at 2.76 million tons, already up 10% […]
By Michael Marley The mini sheet mills face a maxi problem, namely no additional supplies of prompt industrial scrap to feed their growing appetites for that raw material. As they move ahead with planned expansions of existing facilities and the construction of greenfield plants, electric arc furnace (EAF) steelmakers may be forced to rely on additional […]
The Russian government has proposed levying tariffs on the country’s ferrous and non-ferrous exports from Aug.1 until year-end to offset extra costs faced by the state’s sub-contractors due to much higher metal prices. “In order to rule out price manipulation during export, as well as the temptation to understate the value of export contracts and […]
Let’s talk about lead times. Because the results from our latest survey caught my attention. This is the first time in since January-February that you can maybe discern a potential peak in pricing – at least judging by that metric. Lead Times: Trend or Head Fake I’m going to display our lead latest lead time […]
Let’s talk about flat rolled and plate steel mill lead times. Because the results from our latest steel market survey caught my attention. This is the first time in since January-February that you can maybe discern a potential peak in pricing – at least judging by that metric. Lead Times: Trend or Head Fake I’m […]
The traditional correlations between finished steel and scrap prices have broken down this year, and historical spreads might remain off-kilter as more electric-arc furnace (EAF) mills come online globally, CRU Senior Analyst Ryan McKinley said. Crude steel output via EAFs in North America is expected to grow by about 16 million metric tonnes, approximately 20%, […]
Commercial Metals Company posted record earnings of $130 million on net sales of $1.8 billion in the third quarter of FY 2021. Results were the best the company has achieved in its 106-year history. “CMC achieved exceptional results during the third quarter,” said Chairman, President and CEO Barbara Smith. “Demand for our products was robust […]
By Senior Analyst Ryan McKinley, from CRU’s Steelmaking Metallics Monitor The CRU metallics price indicator (CRUmpi) increased by 8.6% m/m in June to 402.4. This increase is primarily a reflection of large price increases for scrap in Europe and the U.S., although some increases occurred in Asia as well. After rising substantially in May, pig iron […]
By CRU Senior Analyst Richard Lu, from CRU’s Steel Sheet Products Monitor In September 2020, President Xi Jinping formally announced that China will aim to achieve a peak in carbon emissions before 2030, followed by carbon neutrality before 2060. As part of the decarbonization efforts, the Chinese government at the start of the year announced […]
This report examines the import share of tubular and long products shipments. Imports’ share of total tubular products rose to 46.6% in April, up from 46.2% in March. Both domestic shipments (-7.0%) and imports of tubular products (-5.8%) fell month on month, yet domestic shipments edged down at a stronger clip when compared to March. […]
Steel prices will correct sharply as supply catches up with demand, potentially falling back to an average of $575 per ton ($28.75 per cwt) in 2022, according to one leading industry analyst. “This too will pass,” was the title chosen by Timna Tanners, metals and mining analyst at Bank of America, for her SMU Community […]
Infrastructure, Energy, Wind Farms, Tanners, Summit Conference, Imports. If you are watching the news, you are aware of the Biden administration’s push for a large (at least $1 trillion) infrastructure bill. There is a lot of discussion about what infrastructure entails in light of the current economy. It’s not your father’s economy. There is need […]
Final Census data shows that total foreign steel imports indeed rose 14% from March to April to 2.64 million tons, rising just 5,000 tons from the preliminary levels SMU reported last week. This is the highest total monthly import level seen since July 2020 when imports were 2.71 million tons. Import licenses currently for May have risen […]
Preliminary Census data shows that total foreign steel imports rose 14% from March to April, up to 2.64 million tons, as U.S. buyers sought relief from climbing domestic prices and limited supplies. This is the highest total monthly import level seen since July 2020 when imports were 2.71 million tons. Import licenses currently for May are at 2.52 million tons, down 4% from […]
Ferrous scrap prices in the U.S. are likely to see a big jump in June, estimated at $50-60 per gross ton or more, primarily as a result of strong demand from foreign buyers, sources tell Steel Market Update. “June will bring significant price increases for ferrous scrap. The biggest factor is the strength of the […]
Commercial Metals was granted approval for an operating air permit that clears the way for construction of its micro mill in Mesa, Ariz. “Receiving the air permit is an important milestone in our latest micro mill project, which we have named Arizona 2,” said Tracy Porter, Executive Vice President and Chief Operating Officer. “With the […]
Final Census data shows that finished steel imports rose 24% from February to March, as more U.S. buyers sought relief from climbing domestic prices and limited supplies. March finished imports were just shy of 1.80 million tons, the highest level seen since August 2019. April finished steel import licenses are currently down 6% from March […]
By CRU Analyst George Pearson from CRU’s Steel Monitor Chinese prices have rebounded this week after three consecutive weeks of decline. However, trading in markets outside of China was lower last week as buyers waited for further developments in Chinese prices and this fed through to lower w/w gains in Europe and the U.S. U.S. […]
Final Census data shows that finished steel imports rose 23% in March to 1.78 million tons, as more U.S. buyers sought relief from climbing domestic prices and limited supplies. This is the highest finished-steel import level seen since August 2019 when finished imports were 1.80 million tons. Total steel imports were 2.29 million tons in […]
Nucor posted its best quarter ever with net earnings of $942.4 million in first-quarter 2021. Net sales soared 33% to $7.02 billion in the quarter on higher steel prices and shipments. “The first quarter of 2021 was the most profitable quarter in our company’s history. We are clearly reaping the rewards from our prior investments […]
Russian steelmaker NLMK said sales in its U.S. division increased 16% in Q1 2021 to 430 million metric tons. The increase was driven by hot-rolled and galvanized steel. Sales of hot rolled increased 17% from the fourth quarter of 2020 and galvanized steel sales soared 37%. Sales of cold rolled fell 13%. On a year-over-year […]
Final Census data shows that finished steel imports rose 15% in February to 1.45 million tons, as more U.S. buyers sought relief from climbing domestic prices and limited supply. This is the highest finished-steel import level seen since May 2020. Total steel imports were 1.90 million tons in February, down 22% month-over-month, due to January’s […]
Looking for a Top… Looking for Steel…. As we conduct our analysis of the flat rolled and plate steel prices this week, we cannot help but notice the pace of increases has slowed…or is the slowing due to many mill order books being closed and having nothing new to offer. The availability of spot tonnage […]
Looking for a Top… Looking for Steel…. As we conduct our analysis of the flat rolled and plate steel prices this week, we cannot help but notice the pace of increases has slowed…or is the slowing due to many mill order books being closed and having nothing new to offer. The availability of spot tonnage […]