Schnitzer Steel, a metals recycler and steel bar producer, reported its best third quarter since FY 2012. Total revenue increased 36 percent sequentially and 25 percent year-over-year to $477 million. Net income was up 50 percent from second quarter and 51 percent from Q3 2016 to $17 million. The improvement was primarily in the company’s […]
Nucor Corp. expects second-quarter results to be somewhat weaker than the first quarter, but an improvement from second-quarter 2016. Results in the range of $1.00 to $1.05 per diluted share will be Nucor’s best second-quarter performance since 2008. In guidance this week, Nucor noted a decrease in the performance of its sheet and bar mills […]
Global manufacturing was at a six month low in May according the latest JP Morgan Global Manufacturing PMI. The composite index inched down to 52.6 from 52.7 in April. Developed nations showed solid steady expansion in manufacturing while growth in emerging nations was nearly flat. The PMI for the U.S. was at an 8 month […]
The Section 232 Investigation of steel imports on national security hearing was held on Tuesday. The testimonies included four representatives of foreign governments: China, Russia, the European Union, and Ukraine. Not surprising, none were in support of new import restrictions by a Section 232 action. China was represented by Yu Gu, First Secretary of the […]
The following article on the hot rolled coil (HRC) futures markets was written by David Feldstein. As the Flack Global Metals director of risk management, Dave is an active participant in the hot rolled coil (HRC) futures market and we believe he will provide insightful commentary and trading ideas to our readers. Besides writing futures […]
Steel Market Update (SMU) spoke with many trading companies over the past few days about concerns their companies might have with the status of the industry and efforts to stop foreign steel from entering the country. “The trading companies are not the bad guy here,” is what one trading executive said to us late this […]
Ferrous scrap prices settled in Detroit with prime grades (bundles/busheling) settling at $360 per gross ton. At the same time there is Chinese auto bundles for sale at very low prices FOB China. Chinese scrap exports are new for the Chinese and there are issues that need to be overcome before they become major suppliers […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. This will explain the difference between our view of the present situation which is subjective and our analysis of trends which is based on the latest facts available. We now have two […]
With consolidated sales of $4.82 billion which is a 30 percent increase over 1Q 2016 and net earnings of $356.9 million it was a good 1st Quarter 2017 for the company. The company reported that the second quarter earnings should exceed that of 1st Quarter. The overall operating rates at the Nucor steel mills was […]
We managed to squeeze in an extra day off for our crew due to the Easter Holiday. So, if you were looking for a newsletter on Sunday evening – sorry, we skipped a day. But, we are making up for it today with an issue that if you printed it you could use as a […]
Licensed data for March was reported by the Steel Import Monitoring System of the US Commerce Department on March 4th. An explanation of the methodology that we at SMU use to analyze the trade data is given at the end of this piece. All volumes in this analysis are reported in short tons. The total […]
For those who missed my comment earlier, Acero Junction hot strip mill is rolling at close to full right now. Our sources are advising us that the mill is running about 50,000 tons of HRC. They have prime slabs on the floor and incoming from Brazil (one of the reasons why semi-finished imports continue to […]
At the end of March the domestic steel mills cancelled any open portion of their ferrous scrap orders for March delivery with their scrap suppliers. This is always the first sign of an expectation of a drop in ferrous scrap prices once the negotiations begin in earnest for April delivery. Even with the tight supplies […]
Nucor Corporation increased its earnings guidance for first quarter 2017 to $1.10-$1.15 per diluted share, more than double its consolidated net earnings of $0.50 per diluted share in fourth quarter and well above analyst consensus of $0.69 EPS. Increased profitability is due to stronger performance of Nucor’s sheet and plate mills. Nucor said in its […]
Licensed data for February was reported by the Steel Import Monitoring System of the US Commerce Department on March 7th. An explanation of the methodology that we at SMU use to analyze the trade data is given at the end of this piece. All volumes in this analysis are reported in short tons. Total rolled […]
We at Steel Market Update (SMU) have been upbeat on the steel market for many weeks. We thought sharing our Key Market Indicators (KMI) with our readers would help everyone to understand our reading on the market and from where we get our core optimism. An explanation of the Key Indicators concept is given at […]
The Department of Commerce, on March 1, issued affirmative preliminary determinations on the antidumping investigations of imports of steel concrete reinforcing bar (rebar) from Japan, Taiwan, and Turkey. Japan received preliminary dumping margins of 209.46 percent; Taiwan dumping margins ranged between 3.48 percent and 29.47 percent; and Turkey margins ranged from 5.29 percent to 7.07 […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. This will explain the difference between our view of the present situation which is subjective and our analysis of trends which is based on the latest facts available. During February our view […]
The following article is from one of our close iron ore & steel trading friends located in Asia: The market has changed or is in turmoil, if you want to call it that, here in SE Asia and China continues to out price themselves whereas the China domestic indicators lead to a different scenario. Ore […]
Licensed data for January was reported by the Steel Import Monitoring System of the US Commerce Department on January 7th. An explanation of the methodology that we at SMU use to analyze the trade data is given at the end of this piece. All volumes in this analysis are reported in short tons. Total rolled […]
Steel Dynamics announced net income of $20 million for fourth quarter 2016. Company net sales totaled $1.9 billion, down from $2.1 billion in third quarter. Operating income decreased to $239.5 million from $338.7 million in the previous quarter. Steel shipments for the quarter totaled 2.2 million; fabrication shipments totaled 131,186 tons. Average selling price for […]
Commercial Metals Company announced net sales of $1.1 billion for earnings of $7.2 million for first quarter 2017, ending Nov. 30, 2016. Metal margins in the Americas Mills segment took a hit of 17 percent in Q1 due to lower selling prices resulting from continued import pressure, scrap price volatility and market uncertainty. Average selling price […]
The following article was provided to Steel Market Update by Beijing Metal Import and Export Company, Ltd. out of China. It is their view of the Chinese steel markets for the week ending at Sunday, January 8th. After the article we will have some independent comments from another Asian steel trading source of ours who […]
Licensed data for December was reported by the Steel Import Monitoring System of the US Commerce Department on January 3rd. An explanation of the methodology that use at SMU to analyze the trade data is given at the end of this piece. All volumes in this analysis are reported in short tons. In December, on […]
The following article on the hot rolled coil (HRC) futures markets was written by David Feldstein. As Flack Steel’s director of risk management, Dave is an active participant in the hot rolled coil (HRC) futures market and we believe he will provide insightful commentary and trading ideas to our readers. Besides writing Futures articles for […]
Licensed data for November was reported by the Steel Import Monitoring System of the US Commerce Department on December 6th. An explanation of the methodology that we at SMU use to analyze the trade data is given at the end of this piece. All volumes in this analysis are reported in short tons. Total rolled […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. This will explain the difference between our view of the present situation which is subjective and our analysis of trends which is based on the latest facts available. At the end of […]
Licensed data for October was reported by the Steel Import Monitoring System of the US Commerce Department on November 8th. An explanation of the methodology that we at SMU use to analyze the trade data is given at the end of this piece. All volumes in this analysis are reported in short tons. Total rolled […]
Steel Market Update has been working on developing new sources to complement some of our original sources out of China. The following information is part of a report we receive once per week from two steel trading companies located in Asia and actively involved with the Chinese steel industry. The first note is from one […]
Nucor Corporation reported net earnings of $270 million for third quarter, up from 233.8 million in Q2 and 227.1 in Q3 2015. Consolidated net sales in third quarter increased 1 percent to $4.29 billion from the previous quarter and 2 percent from a year ago. Average sales price per ton increased 11 percent QoQ. Tons […]