U.S. raw steel production took a slight step back this week following repeated gains over the past five weeks. Weekly steel production by U.S. mills totaled 1,753,000 tons in the week ending March 20, bringing production down 0.5% compared with the week prior when production was 1,761,000 tons. The mill utilization rate last week averaged […]
U.S. raw steel production rose again, a trend that has continued for five weeks and counting. Weekly steel production by U.S. mills totaled 1,761,000 tons in the week ending March 16, pushing production up 0.3% compared with the week prior when production was 1,755,000 tons. The small increase may reflect some seasonality as construction and […]
Steel Market Update is pleased to share this Premium content with Executive members. For information on upgrading to a Premium-level subscription, email Info@SteelMarketUpdate.com. Mill shipments of steel products rose 6.9% month on month in January, while apparent supply was up by nearly 13.5% during the same period. Despite the continued growth month over month since […]
Weekly raw steel production by U.S. mills totaled 1,749,000 tons in the week ending Feb. 27, up 0.2% from the week prior when production was 1,745,000 tons. Although marginal, raw steel production was up for a third consecutive week. The mill utilization rate was 77.2%, up from 77.0% one week ago, yet down 7.0% from the […]
U.S. raw steel production saw a small increase for the fourth consecutive week as domestic mills strive to meet robust demand. Weekly steel production by U.S. mills totaled 1,755,000 tons in the week ending March 6, up 0.3% from the week prior when production was 1,749,000 tons. The mill utilization rate last week averaged 77.4%, […]
Weekly raw steel production by U.S. mills totaled 1,745,000 tons in the week ending Feb. 20, up just 0.1% from the week prior when production was 1,743,000 net tons. Despite the marginal increase, raw steel production was up for the second consecutive week. The mill utilization rate was 77.0%, up from 76.9% one week ago, […]
Mill shipments and supply of sheet products rose by nearly 6.5% month on month in December, a positive close to 2020. Plagued earlier on by COVID, sheet shipments stalled in last year’s second quarter. After reaching bottom in June, they have climbed steadily since. This analysis is based on steel mill shipment data from the […]
Weekly raw steel production by U.S. mills continues to fluctuate–up five of the last seven weeks–as the week ending Feb. 13 totaled 1,743,000 net tons, up 2.2% from the week prior when production was 1,705,000 tons. The mill utilization rate was 76.9%, up from 75.2% one week ago, yet down 5.5% compared with the same […]
Weekly raw steel production by U.S. mills totaled 1,705,000 net tons in the week ending Feb. 6, 2021, a decrease of 1.2 percent compared with the week prior when production was 1,725,000 net tons. Raw steel production in the early going of 2021 has fluctuated week on week. The average mill utilization rate dipped to 75.2 […]
Weekly raw steel production by U.S. mills totaled 1,725,000 net tons in the week ending Jan. 30, resuming a positive move after a small dip the week prior. Production was up 0.5 percent from the week before when the total was 1,717,000 net tons. The mill utilization rate was 76.1 percent, up from 75.7 percent […]
Weekly raw steel output by U.S. mills, which had increased for the prior three weeks, took a small step back in the week ending Jan. 23 with total production of 1,717,000 net tons, down 1.6 percent from the week before. The mill utilization rate was 75.7 percent, down from 76.7 percent week on week and […]
Continuing the uptrend from last year, weekly raw steel production by U.S. mills totaled 1,738,000 net tons in the week ending Jan. 16, up 1.7 percent from the week prior when the total was 1,709,000 net tons. The mill utilization rate was 76.7 percent, up from 75.4 percent week on week, yet still down 8.8 […]
The upward trend in mill shipments and supply of sheet products continues, although the pace fell off as the fourth quarter carried on. After reaching bottom in June, as a result of the global pandemic, mill shipments and supply maintained a slow but steady upward trajectory through November 2020. This analysis is based on steel […]
This report is an analysis of Bureau of Labor Statistics (BLS) data and is intended to provide subscribers with a view of the competitive positions of sheet steel, aluminum, plastic and wood. The analysis includes some downstream products and a comparison of truck and rail transportation. On Jan. 15, the BLS released its series of […]
Weekly raw steel production by U.S. mills totaled 1,709,000 net tons in the week ending Jan. 9, up 3.6 percent from the week before when the total was 1,650,000 net tons. The mill utilization rate was 75.4 percent, up from 74.6 percent the week prior; however, down by 10.3 percent compared to the same week […]
U.S. raw steel production inched up 1.3 percent in November to 6,947,000 net tons, as reported by the American Iron and Steel Institute. This was the highest monthly production figure seen since March 2020 when 7,710,000 tons were produced in a single month. AISI’s monthly raw steel production estimates are different than the weekly estimates […]
Weekly raw steel production by U.S. mills totaled 1,650,000 net tons in the week ending Jan. 2, up 3.1 percent from the week before, which saw some slowing due to the holiday. The average mill utilization rate rose to 74.6 percent, up from 72.3 percent the week prior. Production in the last week of 2020 […]
Weekly raw steel production by U.S. mills totaled 1,619,00 net tons in the week ending Dec. 19, up from 1,567,000 net tons week on week. The operating rate was 73.2 percent, up 3.3 percent from 70.9 percent the week prior. The increase is likely a reflection of mills adding capacity, including U.S. Steel’s restart of […]
Weekly raw steel production by U.S. mills totaled 1,600,000 net tons in the week ending Dec. 26, down 1.2 percent from the prior week, most likely due to the holiday lull. The mill utilization rate was 72.3 percent, down from 73.2 percent the week before and 78.5 percent in the same week last year. Adjusted […]
After reaching bottom in June, due largely to the global pandemic, mill shipments and supply of sheet products have since maintained a slow but steady upward trajectory. This analysis is based on steel mill shipment data from the American Iron and Steel Institute (AISI) and import-export data from the U.S. Department of Commerce. The analysis […]
U.S. raw steel production rose 4.2 percent in October to 6,861,000 net tons, as reported by the American Iron and Steel Institute. AISI’s monthly raw steel production estimates are different than the weekly estimates SMU reports each Tuesday; the monthly estimates are based on over 75 percent of the domestic mills reporting versus only 50 […]
Weekly raw steel production by U.S. mills totaled 1,567,000 net tons in the week ending Dec. 12, down slightly from 1,579,000 week on week. The operating rate was 70.9 percent, down 0.8 percent from 71.4 percent the week prior, based on the American iron and Steel Institute’s calculations, which include idled capacity. Actually, despite the […]
Weekly raw steel production by U.S. mills totaled 1,579,000 net tons in the week ending Dec. 5. As expected, production increased by 1.2 percent after edging off slightly the week prior due to the Thanksgiving holiday break. The operating rate as a result rose to 71.4 percent, up from 70.6 percent the prior week. Even though present […]
Weekly raw steel production by U.S. mills totaled 1,561,000 net tons in the week ending Nov. 28, while the average operating rate was 70.6 percent. Production declined by 1.3 percent from the week prior, likely due to the holiday break. Present capacity utilization represents a 14.4 percent decrease from the same period last year when […]
Weekly raw steel production by U.S. mills totaled 1,582,000 net tons in the week ending Nov. 21. The operating rate was a fraction higher than the prior week at 71.5 percent. Despite the steady increase in production through much of 2020, the latest week’s output remains 13.2 percent behind the same week last year when the […]
Raw steel production by U.S. mills increased by 7,000 net tons last week. In the week ending Nov. 14, domestic steel production totaled 1,580,000 net tons, pushing the average industry capacity utilization rate up slightly to 71.4 percent. Although production continues on a slow upward trajectory, it remains 13.3 percent below the same week last year when the operating rate was […]
Editor’s note 11/17/20: The data in the “Supply Tons YTD” column on Table 3 didn’t populate correctly, and therefore, was in error. Table 3 has now been updated accordingly. Mill shipments and supply of sheet products continue to see slight yet steady growth since reaching bottom in June. This analysis is based on steel mill […]
U.S. raw steel production remained steady in September, up 0.8 percent to 6,587,000 net tons, as reported by the American Iron and Steel Institute. AISI’s monthly raw steel production estimates are different than the weekly estimates SMU reports each Tuesday; the monthly estimates are based on over 75 percent of the domestic mills reporting versus […]
Weekly raw steel production by U.S. mills continues to climb, a trend that started back in May. In the week ending Nov. 7, raw steel production totaled 1,573,000 net tons. The capacity utilization rate rose to 71.1 percent, up from 70.0 percent the week prior. Despite the steady rise in output, the current week’s production represents […]
Growing up I was a bit of a history nerd and my original intention was to be a political science major when I entered Hamline University where I went to college. Over time I morphed into a bit of a political nerd, so elections are exciting times for me. They may not be for many […]