Raw steel production by US mills increased last week, reaching the highest utilization mark in 16 weeks. Domestic output totaled 1,785,000 net tons in the week ending May 14, while mill capacity utilization was 81.8%, the American Iron and Steel Institute (AISI) reported. US output was up 0.5% versus the week prior but 2.7% below […]
Total mill shipments of steel products recovered in March following repeated declines at the start the year. March’s mill shipments totaled 8.342 million tons, a 9% increase from February’s 7.655 million tons. Apparent supply also surged in March, up 12.9% versus the prior month, and expanding for the first time in three months. This analysis is based […]
US raw steel production increased to 7.57 million net tons in March, up 8% from February’s 12-month low, according to recently released American Iron and Steel Institute (AISI) data. While up month over month, March holds the second lowest monthly production rate of the past 13 months. Recall that last August production reached a 20-month high of 8.29 million tons. […]
Raw steel production by US mills was largely unchanged, with just a marginal increase week-on-week (WoW). Domestic output totaled 1,777,000 net tons in the week ending May 7, while mill capacity utilization was 81.4%, the American Iron and Steel Institute reported. US output was up 0.1% versus the week prior but 3.1% below the same […]
Raw steel production by US mills slipped last week, edging down following three weeks of gains. Domestic output totaled 1,775,000 net tons in the week ending April 30, while mill capacity utilization was 81.3%, the American Iron and Steel Institute (AISI) reported. US output was down 0.5% versus the week prior and 3.2% below the […]
US Steel is no longer importing pig iron from Ukraine and Russia for its Big River Steel Works – now the official name of its Osceola, Ark., electric arc furnace (EAF) sheet mill. The Pittsburgh-based steelmaker has also mostly weaned its integrated steel mill in Košice, Slovakia, off Russian raw materials as well, they said. […]
Raw steel production by US mills expanded again last week, now rising for a third straight week. Utilization rates grew further, reaching its highest mark in 13 weeks. Domestic output totaled 1,784,000 net tons in the week ending April 23, while mill capacity utilization was 81.7, reported the American Iron and Steel Institute. US output […]
Raw steel production by US mills grew last week, expanding for the second straight week. Utilization rates exceeded the 80% mark for the first time in four weeks. Domestic output totaled 1,766,000 net tons in the week ending April 16, while mill capacity utilization was 80.9%, reported the American Iron and Steel Institute. US output […]
Total mill shipments of steel products fell for the second straight month in February to 7.655 million tons, a 6.1% decline from January’s 8.153 million tons. Apparent supply also fell in February, down 12.1% versus the prior month, falling repeatedly and unable to maintain the momentum seen during the final quarter of 2021. This analysis is based […]
I shouldn’t say put a fork in this market and call it done. It’s probably too early for that. But some of the anecdotal indicators I mentioned last week are increasingly showing up in the data we and others collect. Take a look at today’s issue: Lead times are still rising, for the most part. […]
Raw steel production by US mills rebounded last week, following repeated declines the prior two weeks. Despite the gain, utilization rates remain below the 80% mark for the third straight week. Domestic output totaled 1,739,000 net tons in the week ending April 9, while mill capacity utilization was 79.7%, the American Iron and Steel Institute […]
Raw steel production by US mills slipped further last week, with utilization rates below the 80% mark for the second straight week. Domestic output totaled 1,724,000 net tons in the week ending April 2, while mill capacity utilization was 79.3%, the American Iron and Steel Institute (AIS) reported. US output was virtually unchanged, down just […]
Raw steel production by US mills slipped last week, with utilization rates edging back below the 80% mark. Domestic output totaled 1,726,000 net tons in the week ending March 26, while mill capacity utilization was 79.4%, reported the American Iron and Steel Institute (AISI). US output dipped 0.9% compared to the prior week and was 2.4% […]
Raw steel production by US mills slipped last week, with utilization rates edging back below the 80% mark. Domestic output totaled 1,726,000 net tons in the week ending March 26, while mill capacity utilization was 79.4%, reported the American Iron and Steel Institute (AISI). US output dipped 0.9% compared to the prior week and was 2.4% […]
Raw steel production by U.S. mills moved back up last week, pushing utilization rates back above the 80% mark. Domestic output totaled 1,742,000 net tons in the week ending March 19, while mill capacity utilization was 80.2%, reported the American Iron and Steel Institute. U.S. output edged up 0.3% compared to the prior week but […]
Raw steel production by U.S. mills edged back down last week, a trend seen six out of the past eight weeks, as mill utilization cycles up and down within a small range. Domestic mills produced a total of 1,737,000 net tons in the week ending March 12, while capacity utilization slipped back down to 79.9%, […]
Total mill shipments of steel products fell in January to 8.153 million tons, a 9.4% decline from December’s 8.995 million tons, 2021’s strongest monthly performance. Apparent supply also fell in January, down 7.6% versus the prior month, and unable to keep the upward trajectory seen during the final quarter of 2021. This analysis is based on steel […]
Raw steel production by U.S. mills recovered last week, expanding for just the second time in seven weeks. Domestic mills produced a total of 1,762,000 net tons in the week ending March 5, while mill capacity utilization edged back up to 80.0%, the American Iron and Steel Institute reported. U.S. output was up 0.4% compared […]
Raw steel production by U.S. mills fell again last week, now down five out of the past six weeks. Domestic mills produced a total of 1,755,000 net tons in the week ending Feb. 26, while mill capacity utilization slipped back down to 79.7%, reported the American Iron and Steel Institute. U.S. output was down 0.5% […]
Raw steel production by U.S. mills edged up last week, the first increase in five weeks. Domestic mills produced a total of 1,764,000 net tons in the week ending Feb. 19, while mill capacity utilization moved back up to 80.1%, reported the American Iron and Steel Institute. U.S. output was up 0.3% compared to the […]
For a fourth straight week, U.S. raw steel production has declined. Domestic mills produced a total of 1,758,000 net tons in the week ending Feb. 12, while mill capacity utilization last week averaged 79.8%, reported the American Iron and Steel Institute. U.S. output was down 1.5% versus the prior week but 1.0% higher than the […]
Total mill shipments of steel products rebounded in December to 8.985 million tons, a 7.8% increase over November’s 8.334 million tons, and the highest monthly total for 2021. Apparent supply saw a 5.0% boost in December, rising for the second straight month following repeated decreases in September and October. This analysis is based on steel mill shipment […]
U.S. raw steel production marginally increased from November to December to 7.83 million net tons, according to recently released American Iron and Steel Institute data. Recall that in August, production reached a 20-month high of 8.29 million tons. December production was up 691,000 tons or 10% compared to the same month last year. Note that […]
Raw steel production by domestic mills fell for the third consecutive week, totaling 1,785,000 net tons in the week ending Feb. 5, according to the American Iron and Steel Institute (AISI). U.S. output was down 0.6% versus the prior week, but was 2.6% higher than the same period last year when production was 1,739,000 net […]
Algoma Steel Group Inc. has awarded GE Gas Power (GE) the contract to upgrade its natural gas combined cycle power plant to support the power requirements of the steelmaker’s new electric arc furnace (EAF). The Sault Ste. Marie, Ontario-based steelmaker said the upgrade, which includes the installation of two gas turbine packages, is expected to […]
Raw steel production by U.S. mills totaled 1,796,000 net tons in the week ending Jan. 29, slipping for the second straight week, reported the American Iron and Steel Institute. Domestic output was down 1.6% versus the prior week, but was still 3.5% higher than the same year-ago period when production was 1,736,000 net tons. Mill […]
World crude steel production grew in December, expanding for only the second time in seven months. Steelmakers around the world produced an estimated 158.7 million metric tons of crude steel in December, surging 10.7% or 15.4 million tons from the prior month, according to World Steel Association (worldsteel) data. Steel production had been trending down […]
Domestic raw steel production totaled 1,803,000 net tons in the week ending Jan. 22, down 1.6% versus the prior week and slipping for the first time in three weeks, reported the American Iron and Steel Institute. Despite the decrease, last week’s output marked a 3.9% gain over the same period last year when production was […]
Raw steel production by domestic mills improved for the second straight week, totaling 1,833,000 net tons in the week ending Jan. 15. The increase marked a 5.6% gain over the same period last year and up 1.1% from the prior week when production was 1,813,000 tons, reported the American Iron and Steel Institute. Mill capacity […]
Total mill shipments of steel products fell 3.3% in November to 8.334 million tons, slipping for only the second time in eight months. Apparent supply rose fractionally in November, up 0.2% after eroding successively the prior two months. This analysis is based on steel mill shipment data from the American Iron and Steel Institute (AISI) and import-export […]