For the week ending July 8, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,712,000 net tons of raw steel, a 1.4 percent decrease over the previous week and a 2.2 percent decrease over the same week one year ago. The estimated capacity utilization rate is 73.2 percent, down […]
For the week ending July 1, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,737,000 net tons of raw steel, a 1.1 percent decrease over the previous week and a 1.2 percent decrease over the same week one year ago. The estimated capacity utilization rate is 74.3 percent, down […]
For the week ending June 25, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,757,000 net tons of raw steel, a 0.4 percent increase over the previous week but a 0.2 percent decrease over the same week one year ago. The estimated capacity utilization rate is 75.1 percent, up […]
The American Iron & Steel Institute (AISI) recently reported final U.S. raw steel production estimates for the month of May 2016. The monthly estimates are different than the weekly estimates we report in our Tuesday issues; the AISI bases the monthly estimates on over 75 percent of the domestic mills reporting vs. only 50 percent […]
For the week ending June 18, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,750,000 net tons of raw steel, a 1.6 percent decrease over the previous week and a 0.6 percent decrease over the same week one year ago. The estimated capacity utilization rate is 74.8 percent, down […]
An explosion and fire at US Steel Edgar Thomson resulted in the evacuation of the steel plant in Braddock, Pennsylvania last night. Firefighting crews from Forest Hills and Braddock responded. No injuries were reported. US Steel released the following statement: “At approximately 7:30 p.m. last evening, an incident occurred in the steelmaking area of the […]
For the week ending June 11, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,779,000 net tons of raw steel, a 1.1 percent increase over the previous week and a 2.0 percent increase over the same week one year ago. The estimated capacity utilization rate is 76.1 percent, up […]
For the week ending June 4, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,760,000 net tons of raw steel, a 0.8 percent decrease over the previous week, but a 0.9 percent increase over the same week one year ago. The estimated capacity utilization rate is 75.3 percent, down […]
For the week ending May 28, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,775,000 net tons of raw steel, a 1.1 percent increase over the previous week and a 4.2 percent increase over the same week one year ago. The estimated capacity utilization rate is 75.9 percent, up […]
For the week ending May 21, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,756,000 net tons of raw steel, a 1.7 percent increase over the previous week and a 3.1 percent increase over the same week one year ago. The estimated capacity utilization rate is 75.1 percent, up […]
Steel Market Update received the following question from one of our readers yesterday (Wednesday, May 18th) regarding the weekly capacity utilization rates that are produced by the American Iron & Steel Institute (AISI) and are published in our Tuesday evening newsletter. “This morning I was reading the latest SMU report and I was left wondering […]
For the week ending May 14, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,727,000 net tons of raw steel, a 1.2 percent decrease over the previous week, but a 1.3 percent increase over the same week one year ago. The estimated capacity utilization rate is 73.9 percent, down […]
For the week ending May 7, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,748,000 net tons of raw steel, a 2.2 percent increase over the previous week and a 2.6 percent increase over the same week one year ago. The estimated capacity utilization rate is 74.7 percent, up […]
For the week ending April 30, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,711,000 net tons of raw steel, a 1.6 percent increase over the previous week and a 3.8 percent increase over the same week one year ago. The estimated capacity utilization rate is 73.2 percent, up […]
The American Iron & Steel Institute (AISI) recently reported final U.S. raw steel production estimates for the month of March 2016. The monthly estimates are different than the weekly estimates we report in our Tuesday issues; the AISI bases the monthly estimates on over 75 percent of the domestic mills reporting vs. only 50 percent […]
For the week ending April 23, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,684,000 net tons of raw steel, a 0.5 percent decrease over the previous week but a 2.1 percent increase over the same week one year ago. The estimated capacity utilization rate is 72.0 percent, down […]
For the week ending April 16, 2016, the American Iron & Steel Institute (AISI) estimated domestic raw steel production was 1,693,000 net tons, up 2.2 percent from the previous week total of 1,656,000 net tons and up 2.7 percent compared with 1,649,000 net tons in the week ending April 16, 2015. The capability utilization rate […]
One of the issues confusing the sheet (flat rolled steel) marketplace is the Raw Steel Production report produced by the American Iron & Steel Institute (AISI). This report is produced on a weekly and then again on a monthly basis. The weekly report is released every Monday afternoon and Steel Market Update publishes the data […]
For the week ending April 11, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,656,000 net tons of raw steel, a 0.4 percent increase over the previous week and a 0.4 percent increase over the same week one year ago. The estimated capacity utilization rate is 70.8 percent, up […]
For the week ending April 2, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,650,000 net tons of raw steel, a 1.5 percent decrease over the previous week but a 2.2 percent increase over the same week one year ago. The estimated capacity utilization rate is 70.6 percent, down […]
The American Iron & Steel Institute (AISI) recently reported final raw steel production estimates for the month of February 2016. The monthly estimates are different than the weekly estimates we report in our Tuesday issues; the AISI bases the monthly estimates on 75 percent of the domestic mills reporting vs. only 50 percent for the […]
For the week ending March 26, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,675,000 net tons of raw steel, a 0.4 percent increase over the previous week and a 4.6 percent increase over the same week one year ago. The estimated capacity utilization rate is 71.6 percent, up […]
For the week ending March 19, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,668,000 net tons of raw steel, a 3.1 percent decrease over the previous week but a 4.2 percent increase over the same week one year ago. The estimated capacity utilization rate is 71.3 percent, down […]
For the week ending March 12, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,722,000 net tons of raw steel, a 2.9 percent increase over the previous week and a 7.6 percent increase over the same week one year ago. The estimated capacity utilization rate is 73.6 percent, up […]
For the week ending March 5, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,673,000 net tons of raw steel, a 1.1 percent decrease over the previous week but a 2.6 percent increase over the same week one year ago. The estimated capacity utilization rate is 71.5 percent, down […]
For the week ending February 27, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,692,000 net tons of raw steel, a 0.4 percent decrease over the previous week and a 0.8 percent decrease over the same week one year ago. The estimated capacity utilization rate is 72.4 percent, down […]
For the week ending February 20, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,699,000 net tons of raw steel, a 0.2 percent decrease over the previous week and a 0.4 percent decrease over the same week one year ago. The estimated capacity utilization rate is 72.7 percent, up […]
For the week ending February 13, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,703,000 net tons of raw steel, a 1.1 percent increase over the previous week but a 0.1 percent decrease over the same week one year ago. The estimated capacity utilization rate is 72.8 percent, up […]
For the week ending February 6, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,685,000 net tons of raw steel, a 1.7 percent increase over the previous week but a 1.2 percent decrease over the same week one year ago. The estimated capacity utilization rate is 71.9 percent, up […]
For the week ending January 30, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,657,000 net tons of raw steel, a 0.8 percent decrease over the previous week and a 8.3 percent decrease over the same week one year ago. The estimated capacity utilization rate is 70.7 percent, up […]