For the week ending September 24, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,605,000 net tons of raw steel, a 1.7 percent decrease over the previous week and a 4.9 percent decrease over the same week one year ago. The estimated capacity utilization rate is 68.6 percent, down […]
The week ending September 17, 2016 domestic raw steel production was 1,632,000 net tons while the capability utilization rate was 69.8 percent. Production was 1,687,000 net tons in the week ending September 17, 2015 while the capability utilization then was 70.5 percent. The current week production represents a 3.3 percent decrease from the same period […]
For the week ending September 10, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,626,000 net tons of raw steel, a 1.8 percent decrease over the previous week and a 3.6 percent decrease over the same week one year ago. The estimated capacity utilization rate is 69.5 percent, down […]
The American Iron and Steel Institute (AISI) released their weekly assessment of the domestic steel mills raw steel production for the week ending September 3, 2016. The AISI reported production as being 1,656,000 net tons with a capacity utilization rate of 70.8 percent. The production rate (based on approximately 50 percent of the industry providing […]
Boy was it nice to have a long weekend off. After the non-stop go, go, go of our Steel Summit Conference I needed a few days to just unwind and do essentially nothing. As of 6 PM this evening the weekly raw steel production report provided by the AISI had not been published. Too much […]
For the week ending August 27, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,642,000 net tons of raw steel, a 0.8 percent decrease over the previous week and a 4.9 percent decrease over the same week one year ago. The estimated capacity utilization rate is 70.2 percent, down […]
The American Iron & Steel Institute (AISI) recently reported final U.S. raw steel production estimates for the month of July 2016. The monthly estimates are different than the weekly estimates we report in our Tuesday issues; the AISI bases the monthly estimates on over 75 percent of the domestic mills reporting vs. only 50 percent […]
For the week ending August 20, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,655,000 net tons of raw steel, a 1.8 percent decrease over the previous week and a 4.1 percent decrease over the same week one year ago. The estimated capacity utilization rate is 70.8 percent, down […]
For the week ending August 13, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,685,000 net tons of raw steel, a 0.7 percent decrease over the previous week and a 2.4 percent decrease over the same week one year ago. The estimated capacity utilization rate is 72.1 percent, down […]
For the week ending August 6, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,697,000 net tons of raw steel, a 1.0 percent increase over the previous week but a 1.7 percent decrease over the same week one year ago. The estimated capacity utilization rate is 72.6 percent, up […]
For the week ending July 30, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,681,000 net tons of raw steel, a 1.3 percent decrease over the previous week and a 3.9 percent decrease over the same week one year ago. The estimated capacity utilization rate is 71.9 percent, down […]
The American Iron & Steel Institute (AISI) recently reported final U.S. raw steel production estimates for the month of June 2016. The monthly estimates are different than the weekly estimates we report in our Tuesday issues; the AISI bases the monthly estimates on over 75 percent of the domestic mills reporting vs. only 50 percent […]
US Steel narrowed its losses in second quarter, reporting a net loss of $46 million compared to a loss of $340 million in first quarter, and $261 million in Q2 2016. Net sales for the company totaled $2.58 billion. Earnings for the flat rolled and US Steel Europe segments returned to positive numbers at $6 […]
For the week ending July 23, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,703,000 net tons of raw steel, a 2.5 percent decrease over the previous week and a 2.7 percent decrease over the same week one year ago. The estimated capacity utilization rate is 72.8 percent, down […]
For the week ending July 15, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,746,000 net tons of raw steel, a 2.0 percent increase over the previous week but a 0.2 percent decrease over the same week one year ago. The estimated capacity utilization rate is 74.7 percent, up […]
For the week ending July 8, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,712,000 net tons of raw steel, a 1.4 percent decrease over the previous week and a 2.2 percent decrease over the same week one year ago. The estimated capacity utilization rate is 73.2 percent, down […]
For the week ending July 1, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,737,000 net tons of raw steel, a 1.1 percent decrease over the previous week and a 1.2 percent decrease over the same week one year ago. The estimated capacity utilization rate is 74.3 percent, down […]
For the week ending June 25, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,757,000 net tons of raw steel, a 0.4 percent increase over the previous week but a 0.2 percent decrease over the same week one year ago. The estimated capacity utilization rate is 75.1 percent, up […]
The American Iron & Steel Institute (AISI) recently reported final U.S. raw steel production estimates for the month of May 2016. The monthly estimates are different than the weekly estimates we report in our Tuesday issues; the AISI bases the monthly estimates on over 75 percent of the domestic mills reporting vs. only 50 percent […]
For the week ending June 18, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,750,000 net tons of raw steel, a 1.6 percent decrease over the previous week and a 0.6 percent decrease over the same week one year ago. The estimated capacity utilization rate is 74.8 percent, down […]
An explosion and fire at US Steel Edgar Thomson resulted in the evacuation of the steel plant in Braddock, Pennsylvania last night. Firefighting crews from Forest Hills and Braddock responded. No injuries were reported. US Steel released the following statement: “At approximately 7:30 p.m. last evening, an incident occurred in the steelmaking area of the […]
For the week ending June 11, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,779,000 net tons of raw steel, a 1.1 percent increase over the previous week and a 2.0 percent increase over the same week one year ago. The estimated capacity utilization rate is 76.1 percent, up […]
For the week ending June 4, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,760,000 net tons of raw steel, a 0.8 percent decrease over the previous week, but a 0.9 percent increase over the same week one year ago. The estimated capacity utilization rate is 75.3 percent, down […]
For the week ending May 28, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,775,000 net tons of raw steel, a 1.1 percent increase over the previous week and a 4.2 percent increase over the same week one year ago. The estimated capacity utilization rate is 75.9 percent, up […]
For the week ending May 21, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,756,000 net tons of raw steel, a 1.7 percent increase over the previous week and a 3.1 percent increase over the same week one year ago. The estimated capacity utilization rate is 75.1 percent, up […]
Steel Market Update received the following question from one of our readers yesterday (Wednesday, May 18th) regarding the weekly capacity utilization rates that are produced by the American Iron & Steel Institute (AISI) and are published in our Tuesday evening newsletter. “This morning I was reading the latest SMU report and I was left wondering […]
For the week ending May 14, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,727,000 net tons of raw steel, a 1.2 percent decrease over the previous week, but a 1.3 percent increase over the same week one year ago. The estimated capacity utilization rate is 73.9 percent, down […]
For the week ending May 7, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,748,000 net tons of raw steel, a 2.2 percent increase over the previous week and a 2.6 percent increase over the same week one year ago. The estimated capacity utilization rate is 74.7 percent, up […]
For the week ending April 30, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,711,000 net tons of raw steel, a 1.6 percent increase over the previous week and a 3.8 percent increase over the same week one year ago. The estimated capacity utilization rate is 73.2 percent, up […]
The American Iron & Steel Institute (AISI) recently reported final U.S. raw steel production estimates for the month of March 2016. The monthly estimates are different than the weekly estimates we report in our Tuesday issues; the AISI bases the monthly estimates on over 75 percent of the domestic mills reporting vs. only 50 percent […]