Steel prices continued to erode in May, following a trend that began halfway through the previous month. Hot-rolled coil (HRC) prices ended May at $990 per ton ($49.50 per cwt) on average, falling by $130 per ton throughout the month. The SMU Price Momentum Indicator for sheet products remained Lower during May after shifting to […]
Steel prices peaked at the start of the month, with hot-rolled coil reaching $1,160 per ton ($58 pet cwt) on average on April 10. Tags began to decline near the month’s halfway mark and closed out the month $40 per ton lower at $1,120 per ton. The SMU Price Momentum Indicator for sheet products was […]
In this Global Economic Outlook, we look ahead to 2023 and outline our top ten calls for the global economy. These include predictions on inflation, the war in Ukraine, electric vehicles and Covid-19 in China. No. 1: Global Growth Will Slow From 2022 We expect both the US and Europe to experience recessions over the […]
Prices of steelmaking raw materials moved in differing directions over the last 30 days, as they did the month prior, according to Steel Market Update’s latest analysis. Through the latest data available as of Nov. 16, pig iron and aluminum increased 7% in the last month, coking coal prices rose 6%, and zinc prices increased 4%. […]
Steel prices declined each week in October, with all sheet products now back in line with late-2020 levels. Hot rolled prices averaged $736 per net ton ($36.80 per cwt) in October, falling from $765 in the beginning of the month to $710 as of last Tuesday. The SMU Price Momentum Indicator for sheet products was […]
Prices of steelmaking raw material moved in differing directions over the last 30 days, according to Steel Market Update’s latest analysis. Through the latest data available as of Oct. 27, coking coal prices increased 15% over the last month, aluminum prices rose 8%, and zinc prices increased 2%. Pig iron prices remained stable. Busheling scrap […]
US sheet prices continue to slide, and the weakness in the domestic market has buyers confident that they can get domestic suppliers to negotiate. For hot-rolled coil, imports have not been very advantageous relative to futures. There have been some workable offers for tandem mill products. But buyers have been more inclined to buy domestically or […]
Steel prices were steady to slightly down throughout the month of September, following declines seen in each of the four months prior. Hot-rolled prices averaged $780 per ton ($39.00 per cwt) the first week of September, falling to a low of $770 per ton in the third week of the month, and rising to $775 […]
Our most recent lead time data is flashing a clear warning signal when it comes to plate prices, and so too are plate prices abroad – which in theory offer massive discounts to domestic numbers. Let’s start with plate lead times, which we released today along with lead time figures for sheet products. Plate lead […]
Prices for each of the steelmaking raw materials tracked in this SMU analysis decreased over the last 30 days, further declining from the record-high levels seen in March and April. Through the latest data available as of Sept. 21, zinc prices decreased 12% in the last month, busheling scrap and aluminum prices fell 7%, pig […]
Steel prices eased overall throughout August, following declines seen in the three previous months. Hot rolled prices were $805 per ton ($40.25 per cwt) the first week of August, falling to a low of $770 per ton in the middle of the month, and rising to $785 per ton as of last Tuesday. The SMU […]
Prices for five of the seven steelmaking raw materials tracked in this SMU analysis decreased over the last 30 days, further declining from the record levels seen in March and April. Through the latest data available as of August 31, pig iron prices decreased 38% in the last month, busheling scrap prices fell 14%, aluminum […]
Steel prices continued to fall in each week of July, following declines in May and June. Hot rolled prices were $955 per ton ($49.75 per cwt) the first week of July, slipping between $35 and $45 per ton each week to reach $840 per ton as of last Tuesday. The SMU Price Momentum Indicator for […]
By CRU Research Analyst James Mills, from CRU’s Multi-Commodity Monthly Report The upside risk to commodity prices created by the war in Ukraine diminished in June as markets assessed the impact of a slower global demand growth outlook, higher inflation expectations, and a continuation of Covid-19 lockdowns in China. Bearish Economic Forecasts Are Downside Risk […]
Steel prices continued to ease each week throughout June, following declines in May as well. Hot rolled prices were $1,190 per ton ($59.50 per cwt) the first week of June. Prices then slipped between $45 and $90 each of the following weeks, with the SMU index averaging $995 per ton as of last Tuesday. (This […]
By CRU Senior Analyst Ryan McKinley, from CRU’s Steel Sheet Products Monitor, June 8 The CRUspi plummeted again month-on-month in June by over 12.3%, which is a larger drop than in May. This makes it the third-largest percentage point drop on record and the second largest in terms of total points. The supply shock caused by […]
Steel prices eased each week in May, following increases in March and most of April. Hot rolled prices were $1,440 per ton ($72 per cwt) the first week of May, just $40 lower than the mid-April peak. Prices then slipped between $15 and $75 each of the following weeks, with the SMU index averaging $1,255 […]
By CRU Senior Analyst Ryan McKinley, from CRU’s Steel Sheet Products Monitor, May 11 The CRUspi plunged month-on-month (MoM) in May by over 8.6%, which is the largest percentage point decline since late 2008 and the second-largest ever in terms of total fallen points. Supply chain readjustments for both sheet and steelmaking raw materials in the […]
Steel prices were relatively steady in April, following increases in March. Hot rolled prices were at $1,460 per ton ($73 per cwt) the first week of April, the highest level seen since January 2022. Prices then bounced around within a $30 per ton range for the remainder of the month, with the SMU index averaging $1,450 per ton as […]
Steel prices rose each week in March, and the increases were the first in six months. Hot rolled prices were down to $1,000 per ton ($50 per cwt) the first week of March, the lowest level seen since December 2020. Prices then surged $435 per ton throughout the month, with the SMU index averaging $1,435 per ton […]
By CRU Senior Analyst Ryan McKinley, from CRU’s Steel Sheet Products Monitor, March 23 Persistently high steelmaking raw material prices and restricted global production pushed sheet prices higher w/w across the world. The largest of these increases were in Europe and the USA, with prices rising by triple-digit amounts for yet another week. Still, domestic […]
Nucor aims to increase base prices for steel sheet by at least $125 per ton ($6.25 per cwt) effective immediately. “We reserve the right to review and re-quote any offers that are not confirmed with either a Nucor sales acknowledgement or written acceptance by both parties,” the company said in a letter to customers dated […]
Sheet prices fell again this week. But price declines for hot-rolled coil have slowed, with HRC tags down $20 per ton ($1 per cwt) and coalescing around $1,000 per ton. While some mills were reported to be cutting deals as low as $900 per ton, others were said to be mulling price hikes. Cold-rolled and […]
Nucor Corp. crushed annual profit records in 2021 and posted yet another quarterly profit record in the fourth quarter. The trend continues a 2021 pattern among domestic steelmakers of each quarter setting a record compared to that set in the prior quarter. All told, the Charlotte, N.C.-based steelmaker posted an annual profit of $6.83 billion […]
Nucor Corp. crushed annual profit records in 2021 and posted yet another quarterly profit record in the fourth quarter. The trend continues a 2021 pattern among domestic steelmakers of each quarter setting a record compared to that set in the prior quarter. All told, the Charlotte, N.C.-based steelmaker posted an annual profit of $6.83 billion […]
South Korean mills are out with new lower prices for steel sheet and steady prices for plate, according to recent offers reviewed by Steel Market Update. The trend is important because U.S. mills are increasingly willing to compete with imports, meaning that the latest import offers give an indication of where domestic prices are headed. […]
By CRU Senior Analyst Atul Kulkarni, from CRU’s Global Steel Trade Service, Jan. 31 The global steel industry is going to witness a transformation in terms of technology and operating practice due to decarbonization pressure. However, this transition will not come without substantial costs, as all CO2 abatement pathways are forecast to be more expensive than […]
The Dodge Momentum Index declined for a third straight month in August, a stark contrast from the six consecutive months of gains seen since the close of 2020. The downturn suggests strong headwinds from supply-chain limitations, rising raw material prices, and labor shortages that are plaguing the nonresidential construction sector, especially new projects. The index […]
By CRU Senior Editor Ryan McKinley, from CRU’s Steelmaking Raw Materials Monitor The CRU metallics price indicator (CRUmpi) fell by 4.8% in August to 393.8, making it the first reading below the 400 level since May. Price falls for scrap and HBI were similar in scale, but pig iron prices have moved notably lower. Demand […]
The Chicago Business Barometer reached its highest level since November 1973, coming in at 75.2 for May. New orders jumped 7.7 points, indicating strong demand in the region. Survey respondents noted that high consumer demand may be due in part to worries about raw material shortages. Production slowed by 2.3 points and order backlogs were […]