All of the flat rolled steel price indices followed by Steel Market Update moved lower this past week. Based on performance and their ability to keep up with the markets, the three key indices are SMU, CRU and Platts which reported benchmark hot rolled price averages as $615, $614 and $615 per ton, respectively. SteelBenchmarker […]
Hot rolled prices dropped on all the indexes which reported new pricing this past week. Steel Market Update was down $10 per ton to $620 per ton with CRU ($623) and Platts ($625) coming very close to the SMU number. SteelBenchmarker did not report new pricing this past week as they only report HRC prices […]
With the exception of Platts, all of the other flat rolled steel indexes reported benchmark hot rolled pricing as being down $5-$9 per ton this past week. Our average also declined by $5 per ton and now sits at $637 per ton. With at least one mill offering spot hot rolled at, or below, $600 […]
Flat rolled steel prices, as reported by Steel Market Update, Platts, CRU this past week (SteelBenchmarker did not report last week) had mixed results. CRU and SMU have hot rolled prices at $634 and $635 respectively. Platts remains stuck at $640 as they have been for a number of weeks now. SteelBenchmarker did not report […]
Late last week Steel Market Update (SMU) adjusted our galvanized range to take into consideration the growing number of base prices reaching down to the $35.00/cwt level. Our galvanized range is now $35.00/cwt-$38.00/cwt for new spot orders. Over the weekend we adjusted our hot rolled range to reflect the lower numbers we have been collecting […]
Flat rolled steel prices began to stabilize this past week after having peaked in the middle of August at $675 per ton (hot rolled) and then slowly sliding to a low of $630 per ton during the week ending November 1, 2014. The SMU HRC average actually rose slightly to $635 per ton this past […]
Prices dropped on all of the indexes and all of the products followed by Steel Market Update. The average for hot rolled, based on the four indexes, was $641 per ton. Steel Market Update saw the market as being down to an average of $630 per ton just prior to the AK Steel announcement. The […]
Flat rolled steel prices continued to erode this past week based on SMU analysis of the CRU, Platts and SteelBenchmarker steel indices for the week ending October 24, 2014. Hot rolled prices now average $645 per ton, down $3 per ton from the prior week. If you remove SteelBenchmarker from the average, since they did […]
On Friday, Steel Market Update adjusted our hot rolled coil price range to $620-$660 per ton and our average was adjusted to $640 per ton. All of the other indexes also moved lower on hot rolled coil and the average of the four steel price indexes moved lower by $8 per ton to $647 per […]
The market believed that consolidation of the steel mills would result in a much more disciplined industry, especially regarding flat rolled steel prices. Larger steel mills and fewer players would mean less negotiating and better control of production facilities. That is what the market wanted to believe. However, it is not easy for a leopard […]
Steel Market Update provides a comparison of a handful of flat rolled steel indices to not only check prices but also look for changes in price momentum. The four indexes reviewed are: CRU, Platts, SteelBenchmarker and our own SMU index. Hot rolled prices dropped again this past week as all of the reporting indexes were […]
On Tuesday (today) Steel Market Update (SMU) adjusted our Price Momentum Indicator from Neutral to Lower. I explain our reasoning in the first article above regarding our price indices. I will do a more detailed explanation as to why we are making a change at this point in time in the coming days. Today Steel […]
As of Friday of this past week, SMU, CRU and Platts had hot rolled price averages as $655, $656 and $655 per ton. SteelBenchmarker did not report prices last week and remains stuck at $668 per ton. Our average dropped to $659 per ton as all three of the reporting indexes saw HRC down $5 […]
Hot rolled dropped $4 per ton based on the averages of the four indexes followed by Steel Market Update. Three of the indexes had hot rolled at $660 per ton (SMU, Platts) or $661 per ton (CRU) with SteelBenchmarker the highest at $668 per ton. For cold rolled, SteelBenchmarker was the lowest index at $774 […]
One of our readers asked us earlier this week what the average price for hot rolled has been so far this calendar year according to the Steel Market Update HRC index. The answer to that question is $665.30 per ton through this current week. The average of all of the hot rolled indexes followed on […]
Flat rolled steel prices moved lower this past week according to the various steel price indexes followed by Steel Market Update. The largest movement was seen in cold rolled prices but hot rolled prices and Galvalume prices also fell during the past week. The one item which did not see erosion was galvanized prices which […]
As we look at our price indices for the week of September 8th we want to take a moment to advise our galvanized customers that we are revising our .060 G90 benchmark index to account for the change in zinc coating extras. After reviewing the changes made by the domestic steel mills we have decided […]
Flat rolled steel prices continue to slip lower as the various indexes watched by Steel Market Update begin to come to a consensus as the spreads between the indexes shrink. Platts dropped their benchmark hot rolled price by $5 per ton and CRU by $2 per ton. SteelBenchmarker did not report prices this week as […]
Flat rolled steel prices continued to slip this past week according to our analysis of the various flat rolled price indexes we follow on a regular basis. The benchmark hot rolled average dropped $6 per ton to $671 per ton with SMU being the lowest at $665 and SteelBenchmarker the highest at $677 per ton. […]
Home price gains slowed in June according to the S&P/Case-Shiller Home Price Indices. The monthly national index increased just 0.9 percent in June and the 10-City and 20-City Composites increased 1.0 percent. The index shows a sustained slowdown in the 12 months ending June 2014. “Home price gains continue to ease as they have since […]
The spreads between the various steel price indexes watched on a weekly basis by Steel Market Update have been shrinking. With the exception of plate (which had price increase announcements during the week) and SMU cold rolled, all of the other flat rolled steel price indices either moved sideways or moved lower this past week. […]
Spreads between the indexes are beginning to narrow as the market has been trending sideways (with a slight upward bias) for a number of weeks. Benchmark hot rolled numbers were up $2 per ton due to SteelBenchmarker reporting new numbers this past week (SteelBenchmarker only reports prices twice per month). The average of all the […]
Flat rolled steel price indexes followed by Steel Market Update on a weekly basis saw prices continuing to be firm to slightly higher on most products. Benchmark hot rolled coil prices averaged $676 per ton, up $2 per ton compared to the previous week’s average. SMU HRC pricing remained stable at $675 per ton while […]
Last week flat rolled steel prices moved higher by modest amounts, $5 per ton or less with a couple exceptions (see table below). Since the beginning of July our SMU steel price index has seen hot rolled prices move higher by $15 per ton, cold rolled prices by $10, galvanized prices by $10 and Galvalume […]
Home prices grew moderately in May according to the latest S&P/Case-Shiller Home Price Indices. On a year-over-year basis the 10-City Composite gained 9.4 percent and the 20-City gained 9.3 percent, down from the previous y/y gains reported last month of 10.9 percent and 10.8 percent, respectively. The 10- and 20-City Composites posted gains of 1.1 […]
Flat rolled steel prices have been essentially trending sideways for the past couple of weeks and this past week was no exception. We saw our hot rolled average increase by $3 per ton to $673 per ton with the CRU having the lowest HRC pricing at $667 per ton and Platts the highest at $680 […]
Steel Market Update watches a number of flat rolled steel indexes and once per week we provide our readers an analysis of what movement has occurred in each during the prior week. This week we found small movements, mostly indicating higher prices, in most of the indices. Hot rolled saw two indexes moving prices by […]
This past week saw very little movement in any of the indexes followed by Steel Market Update. Benchmark hot rolled averages ranged from a low of $670 per ton (SMU) to a high of $671 per ton (SteelBenchmarker). The only change from the previous week was in the CRU which rose $1 per ton to […]
Steel Market Update did not publish on Sunday evening due to the extended 4th of July holiday here in the United States. We know that there are a number of our readers who enjoy our Comparison Price Indices (CPI) articles on Sunday evening. Here is what the CPI looks like as of Monday evening: Benchmark […]
During the month of June we saw all of the steel price indexes followed by Steel Market Update decline by double digits ($10 per ton or greater). The only exception was on plate which saw two of the three indexes taking prices higher and one remaining the same. Looking at the indices as a whole […]