With the Trump administration eliminating the Section 232 tariff exclusions for Canada, Mexico and the European Union, it is our opinion that the squeeze on supply coupled with higher prices due to the tariff will provide cover for the domestic steel mills to raise flat rolled and plate steel prices. SMU last moved our Price […]
Flat rolled and plate prices had yet another mixed week, according to the latest comparison of leading price indices. Steel Market Update’s hot rolled average decreased by $10 to $890 per ton, while Platts’ hot rolled price rose $4 to $894 per ton. SteelBenchmarker adjusted their hot rolled price to $886 per ton, up $5 […]
Steel Market Update will be conducting our early June flat rolled and plate steel market analysis beginning at 8:30 a.m. ET on Monday. If you receive an invitation to participate, please take a few moments to open the email and answer the first question at the bottom of the message. That will take you to […]
The Trump administration’s announcement today that it would not spare its closest trading partners from the 25 percent tariff on steel imports surprised many in the market. Effective at midnight, steel from Canada, Mexico and the EU countries will be subject to the same penalty as exports from China and other so-called “bad actors.” Steel […]
Based on the latest license data from the U.S. Department of Commerce reported earlier this week, we are expecting the trend for May steel imports to total approximatley 2.6 million net tons. That’s just over one million tons less than what was imported in April. We continue to see strength in coil and sheet plate […]
Steel Market Update adjusted its price momentum indicator from neutral to higher in late May. Across the month, hot rolled steel prices averaged $886 per ton (up $13 over April), while cold rolled was at $1,007 (up $1), galvanized at $1,100 (unchanged), Galvalume at $1,322 (up $6), and plate at $966 (down $8). The SMU […]
The American iron and steel industry supports nearly two million jobs and contributes more than $520 billion to the U.S. economy, when considering the direct, indirect (supplier) and induced impacts of related commerce, claims a study released last week by the research firm John Dunham & Associates. The study also shows that the iron and […]
There was little movement in flat rolled steel prices over the past seven days most likely due to the Memorial Day holiday weekend. Steel buyers returned to their offices after the long holiday weekend and advised Steel Market Update of what they are seeing out of the domestic steel mills. Last week, we saw a […]
The steel market is waiting anxiously to see what happens June 1 when the tariff exclusions are set to expire for Canada, Mexico and the European Union. Some expect the exclusions to be extended as trade negotiations continue. Most expect steel prices to remain steady or move higher, based on an informal canvass of Steel […]
Flat rolled and plate prices had yet another mixed week, according to the latest comparison of leading price indices. Steel Market Update’s hot rolled average increased by $20 to $900 per ton, while Platts’ hot rolled price was unchanged at $890 per ton. SMU’s cold rolled average fell $5 to $1,005 per ton, while Platts […]
Based on the latest license data from the U.S. Department of Commerce reported earlier this week, we are expecting the trend for May steel imports to total 2.5 million to 2.6 million net tons. We continue to see strength in plate imports, in both coil and sheet. Finished imports are trending toward 2.1 million net […]
What are the potential long-term implications of the Trump administration steel tariffs, in particular their effects on rerollers in the United States? Steel Market Update canvassed steel executives this week for their views on current market conditions, and the impact of the tariffs on pricing and availability clearly remains a source of concern. “I buy […]
A large manufacturing company that buys a tremendous amount of hot rolled in the spot markets explained to SMU what they were seeing out of the domestic steel mills this week: “The market is relatively calm at the moment. Steel prices have been hovering in the same range for the last four to five weeks. […]
Steel Market Update canvassed the market on May 22 to gather steel executives’ views on supply, demand and pricing in the current environment. Some also shared their thoughts on their biggest challenges today. Below are some of their more insightful comments: Q: Are you seeing any signs that steel prices are going to “break out” […]
I spent most of today canvassing the flat rolled and plate steel markets. A portion of the results of my inquiries can be found in our pricing article (indexes) and Tim Triplett’s article entitled, “SMU Q&A: No Signs of a Price ‘Breakout’ Either Way.” Many steel buyers are confused by the lack of clarity in […]
Service centers held essentially the same number of months of supply of flat rolled steel inventories at the end of April as they did as of the end of March 2018. SMU Service Center Months of Supply Index for flat rolled (sheet) steel is 2.7 months based on responses from 95 percent of the steel […]
Flat rolled prices increased slightly on most products this past week, according to the steel price indexes followed by Steel Market Update. Plate prices were seen as being slightly lower than what was published one week ago. Benchmark hot rolled has been relatively stable over the past few weeks. SteelBenchmarker, which only publishes prices twice […]
Despite all the uncertainty on the trade front, demand has stayed strong, and buyers and sellers of flat rolled steel remain optimistic about their chances for success in current and near-term market conditions. The SMU Steel Buyers Sentiment Index, which measures how buyers and sellers of flat rolled and plate steels feel about their companies’ […]
Despite all the uncertainty on the trade front, demand has stayed strong, and buyers and sellers of flat rolled steel remain optimistic about their chances for success in current and near-term market conditions. The SMU Steel Buyers Sentiment Index, which measures how buyers and sellers of flat rolled and plate steels feel about their companies’ […]
For the many friends and admirers who believed Don Simon would be in the steel business forever, the day has finally come. Simon has sold the family business to Union Partners. “I am extremely grateful to have been able to serve the steel industry for as long as I have,” stated the 87-year-old Simon, who […]
Foreign steel imports for May are trending toward a 2.3 million net ton month, based on the data released by the U.S. Department of Commerce earlier this week. April imports were just shy 4.0 million net tons. In the graphic below, we are tracking the license rate for the first two weeks of a month […]
Flat rolled steel prices were mixed again this week. Benchmark hot rolled saw erosion at the low end and a slight increase at the top end of our range. The net result being HRC is unchanged compared to one week ago. Other products saw similar adjustments with most averages being close to where they were […]
Steel Market Update’s analysis of import market share for sheet, plate, long and tubular products and their 18 subcategories shows big disparities by product type. Table 1 shows total supply to the market in three months through March and in 12 months through March for the four product groups and the 18 subcategories. Supply to […]
Flat rolled and plate prices had yet another mixed week as there seems to be a semblance of balance in the flat rolled side of the market, while plate customers wait for new pricing. Hot rolled prices were essentially unchanged with Steel Market Update’s average remaining at $880 per ton ($44.00/cwt). Platts moved their average […]
This analysis breaks down the imported tonnage of six flat rolled products by district of entry and source country. Our intent is to describe in detail what is going on in a company’s immediate neighborhood and thus provide a negotiating advantage for Steel Market Update subscribers. Premium members will find reports here on our website […]
Steel Market Update began working with a large group of flat rolled and plate steel service centers last July regarding producing a new index for distributor inventories. Our initial concentration has been to collect the number of months of supply steel distrubutors were averaging as of the end of the month. Earlier this week, we […]
For Steel Market Update’s upcoming steel summit Aug. 27-29 in Atlanta, we have recruited an exceptional group of speakers who are prepared to talk on a wide variety of topics of importance to those in the flat rolled and plate steel markets as manufacturers, distributors, steel mills, toll processors or suppliers to those industries. Putting […]
U.S. steel exports in March totaled 868,854 net tons (788,212 metric tons), up 7.9 percent from the month before, but down 8.4 percent from March 2017. Total exports have averaged 800,000-820,000 tons over the last few months. The total March export figure is above the three-month moving average (average of January 2018, February 2018 and […]
Flat rolled and plate steel prices were mixed in what has to be considered yet another quiet week for pricing. Steel buyers have mixed feelings as to where steel prices go from here, with some believing prices have no place to go but up and others looking at the HRC futures market (which is backwardated) […]
SMU’s flat rolled steel Price Momentum Indicator is currently pointing at Neutral meaning sheet steel prices are in transition or have hit a lull. A Neutral reading does not mean flat rolled steel prices will automatically move lower from here just because the previous indication was for higher prices. The injection of the U.S. government […]