Underlying price function stops sliding and may have found basis for strengthening The London Metal Exchange (LME) may have found a floor to stop the slide it has experienced since April. Topping out near $3,400 metric tons earlier this year, the price of aluminum drifted lower steadily in the second quarter and into the third […]
Total mill shipments of steel products shrank in June, after gaining ground the month before. June’s mill shipments totaled 8.09 million tons, a 3.5% decline from May’s 8.38 million tons. Apparent supply also declined in June, down 2.8% versus the prior month. This analysis is based on steel mill shipment data from the American Iron and Steel […]
We are now 11 days away from the start of the 2022 SMU Steel Summit Conference at the Georgia International Convention Center in Atlanta. As of Wednesday, we had 1,174 registered attendees from all over the world. This year’s conference will be the largest one ever conducted by Steel Market Update, and it will be […]
US plate prices edged down again this week after seeing their largest decline in nearly five years the week prior. The latest declines are not exactly a surprise given plate prices had been holding an unsustainable premium over coil and buying has been largely hand-to-mouth. But the straw that broke the camel’s back might just […]
Chicago-based Evraz North America is encouraged by its Russian parent company’s decision to divest its North American assets. The steelmaker said the move would provide increased certainty for its North American operations and employees. Evraz plc’s announcement of a sale “strengthens our long-term stability and will allow us to continue to lead in the markets where we […]
Russia’s Evraz plc has put its North American operations up for sale. Evraz North America (Evraz NA) operates two electric arc furnace facilities, four rolling mills, eight tube mills, and 17 scrap recycling facilities. It has annual steelmaking capacity of 2.3 million tons and a finished steel capacity of 3.5 million tons per year, including […]
A fire at one of Algoma Steel’s coal conveyors is not affecting iron and steelmaking operations at the company’s mill in Sault St. Marie, Ontario. But coke production will be reduced while the damage is repaired. The fire occurred on Aug. 7, 2022, on one of the conveyors that supplies coal to two of Algoma’s […]
Eariler this week, SMU polled steel buyers on a variety of subjects including current and future steel prices, price increase announcements, supply, demand, and new mill capacity. Rather than summarizing the comments we received, we are sharing them in each buyer’s own words. We want to hear your thoughts, too! Contact Brett@SteelMarketUpdate.com to be included […]
US steel exports were up 1% from May to June, totaling just shy of 800,000 net tons, according to the latest US Commerce Department data. This is the third highest monthly export rate seen in the past four years. On a 12-month moving average (12MMA), June exports rose to a 3+ year record high. Total June exports are […]
SMU’s benchmark hot-rolled coil price inched upward for the first time since mid-April, nearly four months ago. The modest gain came even as cold-rolled and coated prices continued to see significant declines. Plate prices were roughly flat. By the numbers: Our average hot-rolled coil price now stands at $820 per ton ($41 per cwt), up […]
Algoma’s plate mill is up and running following the first phase of a modernization project that was completed in June. The second phase of the expansion, initially expected to be finished by November 2022, has been moved to June 2023, a company spokeswoman told SMU on Tuesday, Aug. 9. The reason: “to support our customers […]
Final Census data shows that June steel imports totalled 2.84 million net tons, 24,000 tons higher than preliminary figures reported last week. June imports are down 8% compared to March’s 26-month high of 3.09 million tons. Import licenses for July now total 2.57 million tons through Aug. 3rd data. This is up from 2.15 million […]
Algoma Steel Group posted solid profits in its fiscal first quarter on rising steel prices, despite higher raw material costs for iron ore, scrap, alloys and natural gas. The Sault Ste. Marie, Ontario-based flat-rolled steelmaker also said the gains came despite a “significant” planned outage at its plate mill for a first phase of upgrades. […]
Klöckner & Co SE is fortifying its relationship with Nucor by investing in a new plate processing facility on the campus of Nucor’s new steel mill in Brandenburg, Kentucky. Anticipated to be a state-of-the-art facility, Nucor Steel Brandenburg will house an electric arc furnace that will produce heavy plate for infrastructure projects such as wind […]
As has been the case for six weeks now, nearly nine out of ten steel executives polled this week reported that mills are willing to talk price to secure an order. According to our steel market surveys, a high willingness to negotiate has been evident in each of our checks since early May. SMU polls […]
Steel mill lead times were mixed this week, with some products slightly up and others down, according to SMU’s latest market check. Hot rolled and plate lead times rose compared to what we saw two weeks ago, while cold rolled and coated lead times inched further downward. Is this just a blip or the start […]
While Evraz plc’s earnings results in the first half of the year were negatively impacted by geopolitical tensions and resulting operational challenges, the company’s North American operations recorded a solid performance. The Russian steelmaker made no mention of Russian forces invading Ukraine in February in its H1 financial results, citing only “geopolitical tensions, mounting economic […]
Flat-rolled steel prices fell again this week as they have just about every week since late April. But there were a couple of new trends of note this time, even if they don’t change the overall narrative of a continued correction in flat-rolled steel prices. For starters, plate prices took a big tumble – down […]
Sheet prices continued to move lower this week, and plate joined the downward trend following a price decrease announced last week by Nucor Corp. Hot-rolled coil prices now have a tenuous grasp on $800 per ton ($40 per cwt). SMU’s average HRC price stands at $805 per ton, down $35 per ton from last week […]
Algoma Steel and United Steelworkers (USW) Local 2251 have agreed to extend labor contract talks for another 15 days, narrowly averting a strike. The Sault Ste. Marie, Ontario-based steelmaker confirmed that in a press release on Saturday. And USW Local 2251 president Mike Da Prat confirmed it as well in an exclusive interview with Steel […]
US plate prices were largely unchanged this week, but probably not for long now that Nucor has significantly lowered plate prices with the opening of its September plate order book. The move came after Nucor in early July kept prices flat with the opening of its August order book. Discrete plate prices, as well as prices […]
There’s plenty of doom and gloom these days in steel. Our recent Community Chat with Associated General Contractors of America chief economist Ken Simonson provided a welcome respite from the dreary mood among some steel buyers. But let’s not get carried away. Simonson didn’t say prices weren’t falling. In fact, it’s not just steel prices […]
Preliminary Census data indicates that June steel imports will total 2.81 million net tons, just 61,000 tons higher than May levels. June figures are down 9% compared to March’s 26-month high of 3.09 million tons. Import licenses for July are currently at 2.15 million tons through July 25th data. (July figures are expected to increase as import […]
Reliance Steel & Aluminum Co. “delivered an exceptional second quarter with record-setting financial performance and outstanding operational execution,” CEO Jim Hoffman said in the service center’s second quarter results release. Reliance reported record second quarter net income of $572.8 million on sales of $4.68 billion. The company’s top results were driven by “ongoing healthy demand” […]
Though steel prices might down from the historic highs of 2021, Reliance Steel and Aluminum sees its diverse product portfolio and end markets as a buffer, executives said during an earnings call with analysts on Thursday, July 28. “Our product breadth is so diverse, which is part of the strategy and design,” company president Karla […]
Nucor is significantly lowering plate prices with the opening of its September plate order book. Discrete plate prices as well as prices for normalized plate will be $120 per ton ($6 per cwt) lower. Prices for cut-to-length plate 84-inches wide will be $80 per ton ($4 per cwt) lower. All published adders and extras will […]
Prices for hot-rolled, cold-rolled and galvanized flat-rolled steel fell again this week with little signs of a near-term bottom. Hot-rolled prices fells into the low $800s per ton ($40s per cwt). Cold-rolled and galvanized base prices, meanwhile, fell into the $1,200s per ton ($60s per cwt) for the first time since mid-March. Spreads between highs […]
Austal USA has been contracted to build two more towing, salvage, and rescue ships (T-ATS) for the US Navy. The latest contract for the Mobile, Ala.-based shipbuilder, valued at $156 million, is in addition to two other T-ATS contracts awarded to the company last year. The T-ATSs support the Navy fleet operations with ocean-going tug, […]
Swedish steelmaker SSAB expects the heavy plate market in North America to remain relatively stable, reporting solid demand across most of its customer segments. SSAB Americas, which is made up of steel and plate production at its 1.25-million-tons-per-year mill in Montpelier, Iowa, reported increased operating profits in the second quarter despite lower year-on-year shipments. This […]
New sheet and plate capacity from Nucor will be entering the market in force by the end of this year, just in time for an anticipated increase in infrastructure demand, company executives said. Whether those facilities ramp up to their nameplate capacity will ultimately depend on demand, they added. “While we recognize there is considerable […]