Processor BICO Steel has acquired REI Metal Finishing of Kent, Ohio. Mogadore, Ohio-based BICO said the buy will further develop its steel processing and finishing capabilities. Terms of the transaction were not disclosed. REI Metal Finishing, renamed BICO Metal Finishing, supplies steel peening and metal-finishing services to industrial customers, BICO Steel said in a statement. […]
You may have wondered what goes on behind the scenes over here at CRU and Steel Market Update. CRU principal analyst Josh Spoores will talk about what goes into forecasts as well as his take on the latest market trends at the next SMU Community Chat on Wednesday, April 5, at 11 am ET. (You can register […]
Both SMU’s Steel Current and Future Buyers Sentiment Indices have increased from two weeks ago, according to SMU’s most recent survey data. The Steel Buyers Sentiment Indices measure how steel buyers feel about their company’s ability to be successful in the current market, as well as three to six months down the road. Every other […]
Canadian flat rolled producer Algoma Steel Inc. said its performance in the quarter ended March 31 would be much improved over the prior quarter thanks to attractive market conditions and steel prices that were at a nine-month high. In earnings guidance for its fiscal fourth quarter, Algoma said it anticipates quarterly steel shipments to be in […]
Steel mill leads time were largely flat this week, a trend change in a year that has seen them mostly rising, according to SMU’s latest steel market survey data. Case in point: hot-rolled coil lead times were flat for the first time since early January. We’ve noted a similar trend in prices, which tend to trend […]
The percentage of steel buyers finding mills willing to negotiate prices slipped below 25% this week, according to SMU data. Across the products surveyed by SMU, cold rolled took the largest tumble, falling 10 percentage points to 19% of respondents saying mills were willing to talk price. Every two weeks, SMU asks steel buyers whether domestic mills are […]
Nucor’s new plate mill in Brandenburg, Ky., reached another milestone earlier this month with the casting of its first slab on its new continuous caster. The SMS group, supplier of the single-strand caster, announced the milestone was reached on March 8. The caster, one of the largest in the world with an annual production capacity […]
SMU’s hot-rolled coil price posted its smallest week-over-week (WoW) price gain since mid-January. Some sources said the market might be at or near a peak. But others said it might be taking a break ahead of domestic mills rolling out another round of price hikes. Our average hot-rolled coil price stands at $1,145 per ton ($57.25 […]
The LME aluminum three-month price steadied this week despite a whirlwind of upsetting news, finding its footing near $2,300 per metric ton. That’s below the $2,500-per-ton mark we saw as 2023 opened on a more optimistic tone. The recent news from across the geopolitical and macroeconomic scene has dampened demand sentiment in the near term. […]
Imported sheet and plate products’ arrival at US ports rose in January, leading their share of the US markets to recover, while domestic shipments varied during the month. That’s according to a Steel Market Update’s analysis of import data from the US Commerce Department and domestic shipment figures from the American Iron and Steel Institute […]
Flat-rolled steel prices are still trending up in the wake of recent mill tag hikes, albeit at a slower pace this week. We’ve seen a rather notable market cycle over the past 15-plus weeks with repeated price hikes. Is it starting to peter out, or just catching its breath? Hot-rolled coil (HRC) prices have increased […]
The number of steel buyers finding mills willing to negotiate prices sank even further this week, according to SMU data. Galvanized was the only product surveyed by SMU to top 30% of respondents saying mills were willing to talk price, while plate dipped below 10%. Every two weeks, SMU asks steel buyers whether domestic mills are […]
Total US mill shipments of steel products increased in January, recovering from a 23-month low the month prior. January’s shipments were the highest since last August and totaled 7.63 million tons, a 6.5% increase from December’s 7.17 million tons. Apparent supply also saw a month-on-month (MoM) increase in January, up 7.9% vs. the prior month. This analysis […]
Flat Rolled = 52.2 Shipping Days of Supply Plate = 45 Shipping Days of Supply Flat Rolled US service center flat-rolled steel supply in February edged down slightly, while the amount of material on order surged. At the end of February, service centers carried 52.2 shipping days of supply, according to adjusted SMU data. This […]
Evraz North America is joining other steelmakers in raising prices for steel plate. All new orders for carbon, high-strength low-alloy, hot-rolled coils, normalized, and quenched-and-tempered products will immediately increase by a minimum of $60 per ton ($3 per cwt), the Chicago-based steelmaker said in a letter to customers. “We reserve the right to re-quote any […]
Flat-rolled steel prices continue to rise in response to repeated mill pricing announcements, a trend we’ve seen nearly weekly since Monday, Nov. 28, 2022. Hot-rolled coil (HRC) prices have surged by $490 per ton – a 78% jump – since Cleveland-Cliffs and US Steel kicked off the craze with $60-per-ton price hikes. On Monday, Cliffs […]
SSAB Americas has announced plans to increase plate prices by at least $80 per ton ($4 per cwt), the third of its kind in as many months. The notice follows in short order from Nucor’s $50-per-ton increase announced today. The price hike applies equally to rolled, normalized, quenched-and-tempered, and wide cut-to-length plate products. It is […]
The LME aluminium three-month price eased lower again last week and was seen trading Friday at around $2,300 per tonne. Still below the high mark for 2023, recent news from the macroeconomic scene has dampened demand sentiment and prices accordingly. Market participants awaited Jerome Powell’s semi-annual congressional testimony, with Friday’s focus the nonfarm payrolls report. […]
Nucor Corp. aims to increase base prices for steel plate by at least $50 per ton ($2.50 per cwt) with the opening of its May order book. The plate increase is the first of its kind for the steelmaker since March 31, 2021, according to SMU’s steel mill price increase calendar. Nucor had repeatedly maintained […]
US plate prices have steadily increased over the past two weeks, largely in response to repeated mill price hikes. The most recent increase came from Cleveland-Cliffs when the steelmaker aimed to increase base prices for steel plate by at least $60 per ton ($3 per cwt). It was Cliffs’ first official plate price notice in […]
SMU polled steel buyers on a variety of subjects on Monday and Tuesday of this week, including current and future steel prices, inventory strategies, supply, demand, and new mill capacity. Rather than summarizing the comments we received, we are sharing some of them in each buyer’s own words. We want to hear your thoughts, too! […]
February license data indicate that steel imports will have totaled 2.19 million net tons last month, down 16.2% from January. February levels are also down 13.8% when compared to the previous 12-month average. Recall that monthly import levels declined nearly 17% month on month (MoM) in November, before rebounding in December and January. February figures […]
JSW Steel USA said it is the first steel company in the US to adopt Environmental Product Declarations (EPDs). The steelmaker said that with new technology, called “Smart EPD,” it can directly generate and publish verified digital EPDs on demand. Developed by sustainability consultancy TrueNorth Collective, JSW USA said the Smart EPD platform is based on […]
Leeco Steel has added processing equipment at its Portage, Ind., distribution center. The Lisle, Ill.-based plate supplier said it has put in a Messer MPC2000 MC combination cutting and drilling machine. It is capable of plasma cutting, oxy fuel cutting, beveling, drilling, tapping, counter sinking, and etching. Leeco noted that this expands its processing capabilities […]
Aggressive mill price increases are pushing flat-rolled tags up at a sharp clip, rivaling the spike seen in response to the war in Ukraine last March. On Friday, Nucor came out with yet another notice – up an extra $150 per ton ($7.50 per cwt) and setting a new base price for hot band of […]
Ryerson has acquired metals processor and distributor BLP Holdings LLC (BLP). BLP consists of three Houston-based companies: Absolute Metal Products, Metal Cutting Specialists, and Houston Water Jet. Terms of the deal were not disclosed. “BLP and its divisions offer advanced processing solutions aligned with our commitment to growing our high-margin, value-added business,” said Alan Singleton, president […]
The US International Trade Commission (ITC) made a preliminary determination that the domestic steel industry has been “materially injured” by imported tin mill products. The US Commerce Department will therefore continue its investigation into the matter. The proceeding started in January when Cleveland-Cliffs and the United Steelworkers (USW) filed a trade case alleging the following […]
Mexico has historically relied on steel sheet product imports to meet its demand as domestic suppliers, such as Ternium and AHMSA, had insufficient production capacity. But, in recent years, both Ternium and ArcelorMittal have built new capacities for hot-rolled (HR) coil in Mexico. Ternium is also in the process of building more downstream capacity and […]
Steel mill lead times are following prices as they continue to trend upward, according to SMU’s latest market survey. SMU’s hot-rolled lead time is approximately six weeks, up from 5.4 weeks in our last market check two weeks ago. The result is notable because it marks a second consecutive and significant gain. Recall that lead times had been steady just below […]
Steel buyers are finding mills much less willing to negotiate lower prices this week, according to SMU data. Respondents to our latest survey reported that most mills were unwilling to negotiate lower sheet prices. Some said plate mills were still willing to cut deals. Every two weeks, SMU asks steel buyers whether domestic mills willing to negotiate lower […]