Tag: Plate

Movements in lead times were again mixed in SMU’s market check this week, with most products mostly sideways compared to two weeks ago.

The percentage of respondents saying mills were willing to negotiate price rose on all sheet products and plate this week, according to SMU's most recent survey data. 

Nucor plans to keep plate prices flat for yet another month.

Sheet prices slipped for the third consecutive week on continued discounts from certain mills for larger buyers.

There is a lot going on at SMU right now. We’re going to be rolling out a new website over the next few days. We’ve also got more than 1,200 people registered to attend Steel Summit this year, putting us on pace to potentially break last year’s attendance record of nearly 1,300. The event is […]

The LME aluminum three-month price is moving higher again, closing the week on the morning of July 28 at $2,215 per tonne. The previous day, the price dropped sharply at the close and briefly moved below $2,200/t. The next day the price was seen increasing again, suggesting support at $2,200/t has once again been regained. 

The LME aluminum three-month price is moving higher again, closing the week on the morning of July 28 at $2,215 per tonne. The previous day, the price dropped sharply at the close and briefly moved below $2,200/t. The next day the price was seen increasing again, suggesting support at $2,200/t has once again been regained.  […]

Indian steelmaker JSW Steel reported improved performance at its JSW Steel USA operations in the first quarter of its 2024 fiscal year.

Indian steelmaker JSW Steel reported improved performance at its JSW Steel USA operations in the first quarter of its 2024 fiscal year. Recall that JSW operates a sheet and slab mill in Mingo Junction, Ohio, and a plate and pipe mill in Baytown, Texas. The Mingo mill makes slabs not only for internal consumption but also for sale to […]

A preliminary count of imports during the month of June shows little changes from SMU’s previously reported import license analysis. Total imports were 2,792,674 net tons in June’s preliminary count by the US Department of Commerce. As SMU reported earlier this month, that’s the highest level imports have been over the past year. Flat-rolled imports […]

A preliminary count of imports during the month of June shows little changes from SMU’s previously reported import license analysis, so here we take a look at where all that steel is coming from

On Monday and Tuesday of this week, SMU polled steel buyers on a variety of subjects, including steel prices, demand levels, import offers, and inventory. Rather than summarizing the comments we received, we are sharing some of them in each buyer’s own words. We want to hear your thoughts, too! Contact david@steelmarketupdate.com to be included in […]

On Monday and Tuesday of this week, SMU polled steel buyers on a variety of subjects, including steel prices, demand levels, import offers, and inventory. Rather than summarizing the comments we received, we are sharing some of them in each buyer’s own words. We want to hear your thoughts, too! Contact david@steelmarketupdate.com to be included in […]

Cleveland-Cliffs swung to a profit in the second quarter after losing money in the first.

We weren’t supposed to see hot-rolled coil prices dip below $800 per ton ($40 per cwt) anytime soon.

Hot-rolled coil (HRC) prices fell for a second consecutive week as mills appear to have given up holding the line on $900 per ton ($45 per cwt) and amid discounting into the high $700s per ton.

Nucor has completed slightly more than 50% of a $10-billion capital expenditures plan to grow its core steelmaking operations, Leon Topalian, company chair, president, and CEO, said in a second-quarter earnings conference call with investors.

We weren’t supposed to see hot-rolled coil prices dip below $800 per ton ($40 per cwt) anytime soon. Or at least that seemed to be the consensus in mid-June after mills rolled out a round of $50-per-ton price hikes, with a second round rumored to be in the works. That second round of price hikes […]

Hot-rolled coil (HRC) prices fell for a second consecutive week as mills appear to have given up holding the line on $900 per ton ($45 per cwt) and amid discounting into the high $700s per ton. SMU’s average HRC price now stands at $830 per ton, down $40 per ton from a week ago and marking […]

Nucor has completed slightly more than 50% of a $10-billion capital expenditures plan to grow its core steelmaking operations, Leon Topalian, company chair, president, and CEO, said in a second-quarter earnings conference call with investors. Here is an update regarding several of the Charlotte, N.C.-based steelmaker’s projects. Nucor Steel Gallatin (Sheet and Tube) Topalian said the […]

Nucor reported sequentially higher second quarter earnings but warned that results would be worse in the third quarter. "We expect earnings in the third quarter of 2023 to decrease compared to the second quarter of 2023," the company said in comments released with Q2 earnings results on Monday, July 24.

Nucor reported sequentially higher second quarter earnings but warned that results would be worse in the third quarter. “We expect earnings in the third quarter of 2023 to decrease compared to the second quarter of 2023,” the company said in comments released with Q2 earnings results on Monday, July 24. The Charlotte, N.C.-based steelmaker posted […]

Cleveland-Cliffs swung to a profit in the second quarter after losing money in the first. The Cleveland-based steelmaker and iron ore miner predicted that the good times would continue to roll into the second half on what is said was continued strength in automotive demand. “While the performance of our automotive clients continues to improve, […]

While a weak European market is hampering SSAB’s quarterly results, the US market is providing more stability for the Swedish steelmaker. SSAB Americas’ second-quarter performance, together with those of the company’s Special Steels segment, provided a bright spot for the company despite the woes in Europe. SSAB produces steel plate at its US operations in […]

While a weak European market is hampering SSAB’s quarterly results, the US market is providing more stability for the Swedish steelmaker.

Movements in lead times were mixed this week, with those for hot rolled and Galvalume falling back marginally, and those for cold rolled, galvanized, and plate extending slightly. We’re still waiting for a clear pattern to emerge with lead times, as they seem to have been bouncing around since June and generally trending down since […]

Steel buyers report that mills are willing to negotiate lower spot prices for the sheet products SMU surveys.

Movements in lead times were mixed this week, with those for hot rolled and Galvalume falling back marginally, and those for cold rolled, galvanized, and plate extending slightly.

Steel buyers report that mills are willing to negotiate lower spot prices for the sheet products SMU surveys. It’s a different story in plate, where buyers find mills less willing to negotiate lower, according to SMU’s most recent survey data.  The percentage of respondents saying steel mills were willing to talk price on plate stood at 29% this […]

Sheet prices slipped by $20-25 per ton as hot-rolled coil (HRC) failed to break through the $900 per ton threshold some market participants had predicted it would. SMU’s average hot-rolled coil (HRC) price stands at $870 per ton ($43.50 per cwt), down $20 per ton from a week ago. Numbers at or around that figure […]