The SMU Comparison Price Indices saw prices dropping on all products except plate products. Benchmark hot rolled coil saw pricing drop anywhere from $2 per ton (CRU) to $10 per ton (Platts). The HRC average dropped $6 per ton for the week to $670 per ton. Cold rolled also dropped on all of the reporting […]
Nucor Corporation (NYSE: NUE) announced today guidance for Q2 ending July 5, 2014. The full press release can be viewed here. Below are key sections of the report: Nucor expects second quarter results to be in the range of $0.35 to $0.40 per diluted share. This range represents an increase from the second quarter of 2013 […]
We have two markets developing for flat rolled steel imports: hot rolled imports are expected to actually begin to shrink from here as the offers out of Russia and Turkey for hot rolled pricing are approximately $600 per ton or higher. Since most foreign steel buyers tend to be buyers of large tonnage and thus […]
According to industry sources, SSAB Americas announced a price increase on plate products as well as hot rolled coil. The price increase was referenced at $30 per ton ($1.50/cwt) and are effective immediately. Nucor and ArcelorMittal advised their customers after the SSAB announcement was made supporting the $30 per ton move. SMU learned from multiple […]
Canadian shipments for all steel products in the month of May were 509,700 net tons, an increase of 2.7 percent from the month before, but a decrease of 1.0 percent from May 2013. Inventories at the end of the month stood at 1,384,900 tons, down 3.3 percent from last month and down 9.0 percent from […]
Based on the most recent import license data produced by the U.S. Department of Commerce, imports continue to be on pace to meet, or exceed, 3.5 million net tons. This would be the 3rd month in a row where foreign steel imports were at 3.5 million tons or above. Since the beginning of the year […]
The Canadian government approved a controversial oil pipeline project that will extend 732 miles from the oil sands in Alberta to British Columbia. The Enbridge Northern Gateway project is expected to carry 525,000 barrels of crude oil to the Pacific coast for shipment to Asia. The $6.5 billion project took on a new urgency with […]
SSAB is looking at a potential expansion to its facility in Montpelier, Iowa that would increase steel production capacity by 1.2 million tons. The expansion would add about 800,000 tons of finished product annually along with 400,000 tons of smelting capacity to be transferred as slab to SSAB’s mobile facility for rolling and finishing. The end […]
Total service center carbon steel shipments in May declined by 56,600 tons to 3.584 million tons, April was the highest monthly shipping month since March two years ago. Shipping days in May were unchanged from April at 21. Tons per day (t/d) shipments declined from 173,300 in April to 170,600 in May, both on a […]
Hello from New York City. If you are in the steel industry and you have never attended a Steel Success Strategies conference (or been a lobby rat hanging out in the hotel lobby and talking to people as they pass in and out of the hotel) then you need to do it at least one […]
Two flat rolled steel price indexes, Steel Market Update and Platts, saw little movement in flat rolled steel prices this past week. The two indexes are probably the closest they have been in some time with SMU showing hot rolled pricing averaging $670 per ton ($33.50/cwt) while Platts has their benchmark HRC price at $675 […]
Industry and economic data is always subject to inaccuracies so we at SMU try to compare different data sources to get the best handle on a situation. Housing and non-residential construction starts are examples that come to mind. In the case of steel imports we have three reports produced by the US Department of Commerce: […]
Media sources from Serbia report that Esmark Steel Group is in negotiations for a partnership with steel company Zelezara Smederevo. Bojan Bojkovic, financial director of Zelezara, said Esmark representatives visited the factory last week, as reported by American Metal Market. According to sources at Esmark, negotiation information released in Serbia was in violation of confidentiality […]
Prices dropped on all flat rolled items with the exception of plate which remained the same as one week ago. Hot rolled prices dropped by an average of $5 per ton, cold rolled by an average of $10 per ton, galvanized by $3 per ton and Galvalume by $15 per ton. With the latest drop […]
The U.S. Department of Commerce released final census data regarding exports of steel out of the U.S. steel mills this past week. According to the US DOC data, the domestic mills exported a total of 1,079,723 net tons of steel products during the month of April 2014. This is in line with the previous two […]
It was an active month when it came to flat rolled steel prices, at least it was active on a week by week basis. However, when looking at the total month price movement compared against where the previous month ended, then the month of May should be considered rather tame. Hot rolled prices ended the […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. The total number of indicators considered at present is thirty five, the Chicago Fed Mid-West Manufacturing Index is still on hold to enable the staff to complete a major re-vamp of the […]
Licensed data for May was updated on June 3rd through the Steel Import Monitoring System of the US Commerce Department. The SMU publishes several import reports ranging from this very early look using licensed data to the very detailed analysis of final volumes by district of entry and source nation which is published in our […]
Licensed data for May was updated on June 3rd through the Steel Import Monitoring System of the US Commerce Department. The SMU publishes several import reports ranging from this very early look using licensed data to the very detailed analysis of final volumes by district of entry and source nation which is published in our […]
With the exception of SteelBenchmarker which only supplies steel indices twice per month, all of the other indexes showed flat rolled steel averages as being either the same or down slightly compared to one week ago. Perhaps the most surprising has been Platts which by the end of this past week had taken its benchmark […]
The U.S. Department of Commerce released Preliminary Census Data on steel imports into the United States for the month of April on Friday. As expected steel imports jumped by 20 percent compared to the previous month and by 36 percent year-over-year (days adjusted basis) to 3,726,199 net tons (3.4 million+ metric tons). This is for […]
What SMU found interesting when looking at flat rolled steel price movement over this past week is Platts, the industry optimist recently, dropped their benchmark hot rolled pricing multiple times as the week progressed. Platts ended the week down $10 per ton to $685 per ton. The $685 is where SMU had its HRC index […]
Welcome back to those who have returned to your offices for the next big summer push. I spent a portion of my day today trying to get a sense of how business conditions are for those with whom I was speaking. With the exception of one service center located on the East Coast who told […]
Records seem to be breaking just about every time we measure how flat rolled steel buyers and sellers feel about their company’s ability to be successful in the current market environment. There has been a growing optimism within the steel community as business conditions improve for most market segments. This optimism is reported in our […]
The Canadian International Trade Tribunal has decided that imports of hot-rolled carbon steel plate from six countries “has not caused but is threatening to cause injury to the domestic industry.” The complaint was issued by Essar Steel Algoma against plate steel originating in or exported from Brazil, Denmark, Indonesia, Italy, Japan and the Republic of […]
Total service center carbon steel shipments in April rose by 125,500 tons to 3.640 million tons, the highest monthly tonnage since March two years ago. Shipping days in April were unchanged from March at 21. Tons per day (t/d) shipments rose from 167,400 March to 173,300 in April, both on a non-seasonally adjusted basis. Intake […]
With the exception of plate, flat rolled steel prices either moved sideways or slightly lower based on the steel indexes followed by Steel Market Update. Prices appear to have peaked with benchmark hot rolled averaging $688 per ton, cold rolled $808 per ton, galvanized .060″ G90 $871 per ton and Galvalume .0142″ AZ50, Grade 80 […]
US steel service centers shipments for all steel products during the month of April were 3,087,300 net tons, an increase of 3.6 percent from the March shipments, and an increase of 4.9 percent from April 2013 levels. Steel inventories at the end of the month were 8,617,500 tons, an increase of 4.3 percent from the […]
Canadian steel service center shipments for all steel products during the month of April were 496,300 net tons, a decrease of 0.7 percent from the month before, and a decrease of 5.6 percent from April 2013. Inventories at the end of the month stood at 1,431,800 tons, a decrease of 2.7 percent from last month, […]
Steel Market Update published our special data on March steel imports which are produced by product (slabs, plate in coil, hot rolled, cold rolled, galvanized and Galvalume), by port of entry and by the country of origin. The full data is available for review by our Premium Level subscribers. Below is a portion of the […]