The domestic steel mills are resorting to adjustments in supply as a weapon against the chronic short lead times which are helping to push flat rolled steel prices lower and lower. The heavy lifting is being done by the integrated steel mills, especially by U.S. Steel which has taken three blast furnaces down over the […]
Warning: You can drown reaching for the bottom…! Steel Market Update (SMU) is learning that the ferrous scrap deals which were done earlier this week in Detroit and in northern Ohio were done at sideways pricing on obsolete grades (such as heavy melt and shredded scrap) while primes grades (Busheling/bundles) dropped $20 per ton. However, […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. The total number of indicators considered in this analysis is currently 36. Please refer to Table 1 for the view of the present situation and the quantitative measure of trends. Readers should […]
With the reset of iron ore and ferrous scrap pricing there is an extraordinary amount of interest in trying to figure out the cost to produce a hot rolled coil at the domestic steel mills. This is a question Steel Market Update is asked on an almost weekly basis. We wrote about the subject recently […]
There appears to be a lot of uncertainty in the ferrous scrap and pig iron markets as we move into the second half of February and start taking a peak into what March scrap and pig iron pricing may look like. One of our pig iron sources advised SMU that many of the Brazilian pig […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. The total number of indicators considered in this analysis is currently 36. Please refer to Table 1 for the view of the present situation and the quantitative measure of trends. Readers should […]
On Wednesday, US Steel CEO Mario Longhi announced that a number of equipment outages would occur at various U.S. Steel mills due to maintenance or a lack of orders in the energy segment of their business. US Steel will begin replacing a caster at Granite City with one acquired from the former Sparrows Point facility. […]
During Nucor’s earnings conference call the company’s CEO, John Ferriola told the analysts that scrap prices would drop “dramatically” during the 1st Quarter 2015. He told the analysts that steel prices have already gone down and scrap prices “have to” follow. Our scrap sources are telling us that lackluster demand at the steel mills, weak […]
Steel Market Update received an email late last week that spoke to the problems the domestic steel mills are facing right now: a weak global steel market, strong dollar, all U.S. production facilities up and running, growing steel inventories, low in-put costs and a collapse in demand from the energy sector. We thought our readers […]
Ferrous scrap prices were forecast to be up $30 per gross ton as little as one week ago. According to one of our East Coast dealers there were some early sales at up $20 to $30 to those steel mills who needed to buy immediately. However, those deals were few and far between and the […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. The total number of indicators considered in this analysis is currently 36. Please refer to Table 1 for the view of the present situation and the quantitative measure of trends. Readers […]
Members of USW Local 1865 have ratified a new contract at AK Steel. The 42-month labor agreement covers more than 800 hourly and maintenance employees at Ashland, Kentucky Works. The new contract will take effect on March 1, 2015 and expire Sept. 1, 2018. “We are pleased that members of Local 1865 have ratified a […]
With buying prices down by approximately $60 per ton over the past two months, we are seeing a lack of feedstock for shredded scrap across the country. The net result is shredded scrap prices are up $5 to $10 per gross ton compared to where they were in November in most regions east of the […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. The total number of indicators considered in this analysis is currently 36. The Chicago Fed Mid-West Manufacturing Index which was suspended earlier this year was expected to be re-instituted this month but […]
The Wyoming Business Council and JR Simplot Company are hoping to revive a shuttered iron ore mine and build a $500 million iron ore concentrator and pig iron production facility in central Wyoming. The plant would produce cast pigs with a carbon content of 3.5 percent made from low grade taconite ore with an iron […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. The total number of indicators considered has been increased by one this month to thirty six. We have added the price of coking coal FOB the Australian East Coast to the raw […]
A new steel mill for Ohio, that has been in planning since 2005, is getting closer to reality but in a revised version. New Steel International hoped to build a mini mill at Franklin Furnace in Scioto Country but it has agreed to downsize to a pig iron plant and a 300 megawatt cogeneration facility. […]
An explosion at US Steel Fairfield on Sunday evening resulted in the death of two worker and the severe injury of another. US Steel security and paramedics responded to the incident. Edward Lamar Bryant, 53, was pronounced dead on Sunday at UAB Hospital emergency room in Birmingham, Al. Leo Bridges and Mac Bedwell were transported to the […]
As of Monday we will have 16 working days before our 4th Steel Summit Conference (22 total days) and the work only gets more intense for those of us working to put on a great conference. There is still time to register which you can do on our website: www.SteelMarketUpdate.com or by calling our office: […]
Ferrous scrap prices in the Midwest, Mid-Atlantic and East Coast have been moving sideways as the August negotiations come to a close. We are hearing from our scrap sources that the balance between supply and demand is quite good as flows have been solid and mill orders books are “decent.” Our scrap sources in Chicago […]
One of our Steel Summit Conference speakers, Chuck Bradford, produced an interesting report on Chinese pig iron and crude steel production, imports and exports. Mr. Bradford shared the information with Steel Market Update along with a few comments: “Please keep in mind that the data I show in this report is more exact than the […]
Steel Market Update is well aware of the rumors which have been circulating regarding the potential sale of the Severstal North American steel mills. Late last week we learned from our sources that Steel Dynamics and AK Steel were close to purchasing the two U.S. steel mills owned by OAO Severstal out of Russia. Steel […]
Chuck Bradford of the Metals Industry Advisory Group is a well known steel analyst. Mr. Bradford will be participating in our 2014 Steel Summit Conference in Atlanta. Mr. Bradford will be part of a panel discussing commodity prices and the influence of China on the world steel industry – especially here in the United States. […]
The Detroit scrap market settled on Monday with cut grades (such as heavy melt or HMS) rising by $10 per gross ton and shredded scrap by $15 per gross ton. Prime grades, such as #1 busheling traded sideways compared to last month. Our scrap sources are telling us that the best deals made (from a […]
With the 1st of July not coming until Tuesday and Friday being a holiday in the United States, I have decided to hold off our next flat rolled steel market analysis until next Monday, July 7th. That means we will produce our first survey for the month of July next week and then the second […]
US Steel advised us their number 8 blast furnace at USS Gary Works was “operational” after being down for approximately 3 weeks. We understand from our sources that the furnace came back up late last week. The #8 blast furnace at Gary Works is the smallest operating furnace at that facility. The furnace is rated […]
Steel Market Update sources confirmed that the two Severstal North America (NA) steel mills are for sale. At 7.0 million tons of steelmaking capacity, Severstal NA is the fourth largest flat rolled steel producing mill in the United States. Rumors of the possible sale of the Dearborn and Columbus facilities had been circulating around the […]
The terms Buy America and Buy American are not interchangeable. CSI Executive VP, Finance & Administration Brett Guge explains the difference: “The longstanding historical standard for direct government procurement is “Buy American,” which requires only that the steel products used in government projects must have been “substantially transformed” in the U.S. “Buy America,” on the […]
US Steel has another unplanned outage, this time at their Gary Works facility. The furnace went down on Sunday and is expected to be down for anywhere from three to six weeks according to SMU sources. The furnace, referenced as #8 by US Steel, is the smallest of the four operating furnaces at the Gary […]
Ferrous scrap price negotiations are beginning with at least one deal getting done in Detroit within the past few days at down $22 per gross ton. However, as one scrap dealer explained to us earlier today, scrap prices are all over the board. There are steel mills who are bringing furnaces back online and others […]