U.S. Steel and ArcelorMittal USA are the latest steelmakers to announce a price increase. U.S. Steel informed customers today, June 26, that it has raised the base price for all new flat-rolled spot orders by $40 per ton ($2/cwt), effective immediately. Likewise, ArcelorMittal USA added $40 to the base price for its hot rolled, cold […]
I am being asked for my opinion regarding the price increase announcements, and specifically if the increases will “stick”? The announcements are not a surprise to me as some of our data was showing service center spot pricing in the area of “capitulation” (more than 75 percent of the service centers dropping spot prices to […]
Hoping to put an end to declining flat rolled prices, a handful of steelmakers announced $40 per ton increases today, effective immediately on unconfirmed orders. The Nucor Sheet Mill Group was the first to announce that it is increasing base prices on new orders of hot rolled, cold rolled and galvanized steel by a minimum […]
As I expected, Nucor came out with a $40 per ton ($2.00/cwt) price increase on flat rolled this afternoon. This is the first Nucor price increase since Feb. 20, 2019. Shortly after the Nucor announcement, USS/POSCO followed with an increase letter of their own and then NLMK USA put out a letter identifying the minimum […]
Have steel prices finally hit bottom? Nucor is counting on it. The industry-leading steelmaker announced a $40 per ton price increase on it’s flat rolled products earlier today. Other mills are expected to follow suit. Effectively immediately, the Nucor Sheet Mill Group increased base prices on new orders of hot rolled, cold rolled and galvanized […]
Have steel prices finally hit bottom? Nucor is counting on it. The industry-leading steelmaker announced a $40 per ton price increase on it’s flat rolled products earlier today. Other mills are expected to follow suit. Effectively immediately, the Nucor Sheet Mill Group increased base prices on new orders of hot rolled, cold rolled and galvanized […]
Nucor’s Sheet Mill Group announced a second price increase on flat rolled steel today. Effective immediately on new orders, prices for Nucor’s hot rolled, cold rolled and galvanized steel products are increased by $40 per ton ($2/cwt). The notice to Nucor’s customers comes just two weeks after the steelmaker announced the first increase, also of […]
The day started slow, but it seems to have picked up steam after the Nucor announcement. As expected, most of the mills have followed the Nucor lead with NLMK putting specific base prices into the market. The guidance being given in the NLMK announcement is hot rolled at a $560 per ton ($28.00/cwt) minimum base […]
By Chris Houlden, CRU Research Manager CRU held its annual Steel Briefing in New York City on June 17. This Insight summarizes the key takeaways from papers presented by CRU North America market specialists Josh Spoores and Ryan McKinley. • Up to 20 Mt of new hot-rolling and over 8 Mt of steelmaking capacity could come […]
We are starting to receive nominations for the 1st SMU NexGen Leadership Award. We will accept nominations through Aug. 1. Remember, we are looking for those amongst you who have been innovative, creative problem solvers, perhaps creating new systems or leading through troubled times. There are an unlimited number of reasons to nominate one of […]
More than 700 executives are registered with slightly more than two months to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta, Ga., on Aug. 26-28. Once again, the Georgia International Convention Center (www.gicc.com) will be the […]
More than 700 executives are registered with slightly more than two months to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta, Ga., on Aug. 26-28. Once again, the Georgia International Convention Center (www.gicc.com) will be the […]
There were many questions raised earlier this week about the announced new steelmaking and rolling capacities and whether those projects would indeed continue through completion. The questions came during various steel meetings held by analysts, steel mills, CRU and others in New York City. I participated in three events and found the question brought up […]
Two of the biggest steel companies in the U.S. are expecting earnings to decline in the second quarter. Nucor and Steel Dynamics both cite lower shipments and inventory destocking as contributing factors. In guidance released on Monday, Nucor forecast earnings in the range of $1.20 to $1.25 per diluted share compared to $1.63 per share […]
I have been in New York City where one of the competitors of Steel Market Update was conducting a steel conference. There were a number of satellite mini-conferences surrounding the NYC event. I attended three of them: the CRU Steel Briefing, which attracted about 100-150 executives; the Bank of America Merrill Lynch dinner drawing a […]
Imported steel prices are no longer competitive with domestic steel mill pricing – even on light gauge galvanized and other specialty products that normally have gone to trading companies. Lead times are short, but as one steel executive put it to me this afternoon, “It’s not that the mills have no business. [For this time […]
Here we discuss the agenda, speakers and what we were thinking as we put together Day 2 of the SMU Steel Summit Conference, which is Tuesday, August 27, 2019. 7:00 AM to 8:00 AM – Doors Open at the Georgia International Convention Center Coffee, drinks and pastries will be available. Exhibition areas will be manned. […]
2019 SMU Steel Summit Conference – A Sneak Peek – Day 2 Written by: John Packard, President & CEO, Steel Market Update RE: 2019 SMU Steel Summit Conference, August 26-28, 2019 – Location: Georgia International Convention Center, Atlanta, GA On Thursday of this past week, I laid out the thought process involved with putting together […]
The Georgia International Convention Center (www.gicc.com) as well as the three Gateway Hotels (Marriott, Renaissance and SpringHill Suites) are all conveniently located at the first stop of the free SkyTrain out of the Atlanta International Airport (ATL). The second stop on the SkyTrain is for car rentals. Our overflow hotel – the Atlanta Airport Marriott […]
2019 SMU Steel Summit Conference – A Sneak Peek – Day 1 Written by: John Packard, President & CEO, Steel Market Update RE: 2019 SMU Steel Summit Conference, August 26-28, 2019 – Location: Georgia International Convention Center, Atlanta, GA The Georgia International Convention Center (www.gicc.com) as well as the three Gateway Hotels (Marriott, Renaissance and […]
Nucor Tubular Products announced on Monday a $27.2 million expansion for its Trinity, Ala., division that will include new production, finishing, processing and packaging equipment, and hiring of additional workforce to support the new operations. The expansion will allow Nucor Tubular Products to produce 1″ through 8″ A135/795 sprinkler pipe Schedule 10 and Schedule 40; […]
I am in Washington, D.C., attending the joint SMA/AISI annual meeting. I had the unique opportunity to sit down with Phil Bell, President of the Steel Manufacturers Association, and the SMA board to discuss my viewpoints regarding various issues affecting the electric arc furnace manufacturers. The SMA got to see a few of the proprietary […]
Major steel producers in the U.S. had hoped the president wouldn’t blink on the Section 232 tariffs on Canada and Mexico—but he did—in an apparent effort to clear the way for passage of the new North American free trade agreement. Now the mills are supporting the administration’s demand that steel trade in North America be […]
Nucor Corp. and AK Steel were each recognized as a Supplier of the Year for Non-Fabricated Steel at General Motors’ 27th annual awards ceremony in Detroit on May 15. Recipients are chosen by a global team of GM purchasing, engineering, quality, manufacturing and logistics executives. Winners were selected based on performance criteria in Product Purchasing, […]
Nucor Steel South Carolina will celebrate its 50th anniversary next month with plans to add vacuum degassing to its engineered bar capabilities at the Darlington mill. “This strategic investment complements our existing bar mills that primarily produce engineered bar products in Norfolk, Neb., Memphis, Tenn., and Wallingford, Conn. It will position us to better serve […]
So, I don’t even need to be in the office to know what question(s) I am going to be asked all this week. Now that President Trump has removed the Section 232 tariffs from Canada and Mexico (without a quota, but instead a promise of no surge), everyone wants to know how this will affect […]
Steel Market Update is dedicated to assist the greater steel community to attract and maintain young people to the industry. The SMU NexGen Leadership Award, which is in partnership with the Steel Manufacturers Association, is but one step in the process that was begun many years ago. Our Steel 101: Introduction to Steel Making & […]
AISTech 2019, presented by the Association for Iron & Steel Technology, boasted more than 8,000 attendees this year. The four-day conference May 6-9 in Pittsburgh included more than 550 technical presentations and nearly 550 domestic and international exhibiting companies. The exhibit floor was a dizzying display of the latest innovations from software and robotics to cranes […]
AISTech 2019, presented by the Association for Iron & Steel Technology, boasted more than 8,000 attendees this year. The four-day conference May 6-9 in Pittsburgh included more than 550 technical presentations and nearly 550 domestic and international exhibiting companies. The exhibit floor was a dizzying display of the latest innovations from software and robotics to cranes […]
Ronald J. O’Malley has been appointed president of the Association for Iron & Steel Technology (AIST) for 2019–2020. O’Malley succeeds James F. Dudek of United States Steel Corp. O’Malley is the F. Kenneth Iverson Chair Professor in Steelmaking Technologies and director of the Kent D. Peaslee Steel Manufacturing Research Center at the Missouri University of Science […]