California Steel Industries is the latest mill to raise flat rolled steel prices. In a letter to customers on Wednesday, the Fontana, Calif.-based steelmaker said transaction prices for hot rolled, P&O, cold rolled and galvanized steels would increase by $40 per ton ($2/cwt) effective immediately. CSI’s move follows on similar announcements this week from Nucor, […]
We should get a better handle and read on the market, and the strength of the market over the next one to two weeks. The Fourth of July Holiday is over, people are returning to work and decisions are going to have to be made regarding purchases for September through fourth quarter. As you can […]
As widely expected, U.S. Steel, NLMK USA and USS-POSCO Industries notified customers Wednesday that they have increased flat rolled steel prices by $40 per ton, following on similar announcements by Nucor and ArcelorMittal the day before. All total, U.S. steelmakers have raised prices for hot rolled, cold rolled and galvanized steels by $80 per ton […]
The following article discussing the global ferrous derivatives markets was written by David Feldstein. As an independent steel market analyst, advisor and trader, we believe he provides insightful commentary and trading ideas to our readers. Note that Steel Market Update does not take any positions on HRC or scrap trading, and any recommendations made by […]
By CRU Principal Analyst Josh Spoores Sheet price movements have varied across the major markets since mid-June. There were slight gains in China and South East Asia, while prices in Europe were primarily steady m/m. However, for all other markets including North & South America, CIS, India and Japan, prices were lower by 3-9 percent […]
As widely expected, U.S. Steel and NLMK USA notified customers Wednesday that they have increased flat rolled steel prices by $40 per ton, following on similar announcements by Nucor and ArcelorMittal the day before. All total, U.S. steelmakers have raised prices for hot rolled, cold rolled and galvanized steels by $80 per ton in the […]
The 2019 SMU Steel Summit Conference will be held at the Georgia International Convention Center (www.GICC.com) on Aug. 26-28, 2019. Here are some important items you need to know before booking, after booking and before you get to the conference. SMU Steel Summit Conference – Status of Hotel Room Blocks Atlanta Airport Marriott Gateway (host […]
The 2019 SMU Steel Summit Conference will be held at the Georgia International Convention Center (www.GICC.com) on Aug. 26-28, 2019. Here are some important items you need to know before booking, after booking and before you get to the conference. SMU Steel Summit Conference – Status of Hotel Room Blocks Atlanta Airport Marriott Gateway (host […]
SMU Steel 101: Introduction to Steel Making & Market Fundamentals Workshop – Oct. 8-9, 2019 – Cincinnati, Ohio You can learn more about the program, costs and how to register on our website: www.SteelMarketUpdate.com/Events/Steel101 Hotel is The Westin Cincinnati, 21 East 5th St., Cincinnati, OH 45202 Hotel reservation phone number is 513-621-7700 (note, you may […]
SMU Steel 101: Introduction to Steel Making & Market Fundamentals Workshop – Oct. 8-9, 2019 – Cincinnati, Ohio You can learn more about the program, costs and how to register on our website: www.SteelMarketUpdate.com/Events/Steel101 Hotel is The Westin Cincinnati, 21 East 5th St., Cincinnati, OH 45202 Hotel reservation phone number is 513-621-7700 (note, you may […]
Our pricing data was collected on Monday and Tuesday of this week prior to the new Nucor price increase announcement on flat rolled steel. We are seeing the market as stable to slightly higher. This week, especially in light of the second price announcement (combined totaling $80 per ton), we will be able to see […]
Nucor and ArcelorMittal announced a second price increase on flat rolled steel today, and other mills are likely to follow suit. Effective immediately on new orders, prices for Nucor’s hot rolled, cold rolled and galvanized steel products are increased by $40 per ton ($2/cwt). Following Nucor’s lead, ArcelorMittal USA also raised base prices on its […]
Ferrous scrap prices for July settled down $10 per ton in the Western Pennsylvania/Ohio/Indiana markets, stayed sideways in the southern markets, and saw a combination of the two at points west, reported Steel Market Update sources. “This is a far cry from recent expectations of down $20-30/GT and represents what I believe is the bottom […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: Companies have filed thousands of requests seeking exclusions from the Trump administration’s Section 232 tariffs on steel imports, claiming the products they require are not available from domestic sources in the quantities or qualities required. The steel product […]
The steel price increases announced by the major mills have not had much effect on the HVAC sector yet, but members of the Heating, Air Conditioning & Refrigeration Distributors International (HARDI) are hopeful the market has bottomed and the value of their inventories has stabilized. “There hasn’t been much change in behavior on the street […]
Over 800 executives are registered with just seven weeks to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta, Ga., on Aug. 26-28. Once again, the Georgia International Convention Center will be the home of this, our […]
Over 800 executives are registered with just seven weeks to go before the start of the 2019 SMU Steel Summit Conference. We continue to see strong interest in this year’s event, which will be held in Atlanta, Ga., on Aug. 26-28. Once again, the Georgia International Convention Center will be the home of this, our […]
Welcome back from the Fourth of July Holiday (at least here in the United States). Steel Market Update gave our employees a couple of days off as we prepare for the next big push all the way to Atlanta and the SMU Steel Summit Conference on Aug. 26-28. A few minutes after I told those […]
The U.S. Department of Commerce announced duties of up to 456 percent in three preliminary circumvention rulings today involving exports of steel products from Vietnam. The circumvention rulings cover certain steel products that are first produced in Korea and Taiwan, then shipped to Vietnam for minor processing, and finally exported to the United States as […]
On Oct. 8-9, 2019, Steel Market Update will conduct our next Steel 101: Introduction to Steel Making & Market Fundamentals workshop in Cincinnati, Ohio. This workshop will include a tour of the Nucor Steel Gallatin Mill. Why do companies send employees to our Steel 101 workshops? Because they receive a broader understanding of: How steel […]
A note this morning from one of my scrap friends: “Btw, we are not getting too excited just yet, the scrap market is clearly beginning to bottom a bit. Should strengthen a little in August.” I am getting mixed messages on lead times, but I think the consensus is lead times have moved out […]
U.S. Steel and ArcelorMittal USA are the latest steelmakers to announce a price increase. U.S. Steel informed customers today, June 26, that it has raised the base price for all new flat-rolled spot orders by $40 per ton ($2/cwt), effective immediately. Likewise, ArcelorMittal USA added $40 to the base price for its hot rolled, cold […]
There seem to be more questions than answers regarding the move by the domestic flat rolled steel mills to increase spot base pricing on hot rolled, cold rolled, galvanized and Galvalume steels. The move was taken as the low end of the benchmark hot rolled steel base pricing was dipping below $500 per ton. The […]
By CRU Principal Analyst Josh Spoores Sheet prices in the U.S. have continued to fall with HR coil making a significant decline. For HR coil, CRU’s price assessment fell $34 /s.ton w/w to $505 /s.ton, the lowest price recorded since mid-November 2016. North America Our index is a volume-weighted average of actual transactions from last […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Steel From 7/11/2018 up to this Wednesday, 6/26/2019, the HR index that the CME uses to settle the HR futures contract has dropped […]
U.S. Steel and ArcelorMittal USA are the latest steelmakers to announce a price increase. U.S. Steel informed customers today, June 26, that it has raised the base price for all new flat-rolled spot orders by $40 per ton ($2/cwt), effective immediately. Likewise, ArcelorMittal USA added $40 to the base price for its hot rolled, cold […]
I am being asked for my opinion regarding the price increase announcements, and specifically if the increases will “stick”? The announcements are not a surprise to me as some of our data was showing service center spot pricing in the area of “capitulation” (more than 75 percent of the service centers dropping spot prices to […]
Hoping to put an end to declining flat rolled prices, a handful of steelmakers announced $40 per ton increases today, effective immediately on unconfirmed orders. The Nucor Sheet Mill Group was the first to announce that it is increasing base prices on new orders of hot rolled, cold rolled and galvanized steel by a minimum […]
As I expected, Nucor came out with a $40 per ton ($2.00/cwt) price increase on flat rolled this afternoon. This is the first Nucor price increase since Feb. 20, 2019. Shortly after the Nucor announcement, USS/POSCO followed with an increase letter of their own and then NLMK USA put out a letter identifying the minimum […]
Have steel prices finally hit bottom? Nucor is counting on it. The industry-leading steelmaker announced a $40 per ton price increase on it’s flat rolled products earlier today. Other mills are expected to follow suit. Effectively immediately, the Nucor Sheet Mill Group increased base prices on new orders of hot rolled, cold rolled and galvanized […]