NLMK USA’s second-quarter sales dropped 3 percent from the previous quarter to 580,000 metric tons due to lower shipments in anticipation of further deterioration of steel prices. Flat steel prices in the U.S. went down by 6-11 percent from first to second quarter and 23-30 percent on a year-over-year basis. Pricing was impacted by steel […]
California Steel Industries is the latest mill to raise flat rolled steel prices. In a letter to customers on Wednesday, the Fontana, Calif.-based steelmaker said transaction prices for hot rolled, P&O, cold rolled and galvanized steels would increase by $40 per ton ($2/cwt) effective immediately. CSI’s move follows on similar announcements this week from Nucor, […]
NLMK USA is blaming Trump’s tariffs for layoffs at its Pennsylvania steel mill. Last week, 80 to 100 workers were laid off at the hot mill at NLMK’s Farrell steel plant. NLMK USA CEO and President Robert Miller called the tariffs a “failed policy.” “This is what I predicted a year ago,’’ Miller told the […]
California Steel Industries is the latest mill to raise flat rolled steel prices. In a letter to customers on Wednesday, the Fontana, Calif.-based steelmaker said transaction prices for hot rolled, P&O, cold rolled and galvanized steels would increase by $40 per ton ($2/cwt) effective immediately. CSI’s move follows on similar announcements this week from Nucor, […]
As widely expected, U.S. Steel, NLMK USA and USS-POSCO Industries notified customers Wednesday that they have increased flat rolled steel prices by $40 per ton, following on similar announcements by Nucor and ArcelorMittal the day before. All total, U.S. steelmakers have raised prices for hot rolled, cold rolled and galvanized steels by $80 per ton […]
As widely expected, U.S. Steel and NLMK USA notified customers Wednesday that they have increased flat rolled steel prices by $40 per ton, following on similar announcements by Nucor and ArcelorMittal the day before. All total, U.S. steelmakers have raised prices for hot rolled, cold rolled and galvanized steels by $80 per ton in the […]
SMU Steel 101: Introduction to Steel Making & Market Fundamentals Workshop – Oct. 8-9, 2019 – Cincinnati, Ohio You can learn more about the program, costs and how to register on our website: www.SteelMarketUpdate.com/Events/Steel101 Hotel is The Westin Cincinnati, 21 East 5th St., Cincinnati, OH 45202 Hotel reservation phone number is 513-621-7700 (note, you may […]
SMU Steel 101: Introduction to Steel Making & Market Fundamentals Workshop – Oct. 8-9, 2019 – Cincinnati, Ohio You can learn more about the program, costs and how to register on our website: www.SteelMarketUpdate.com/Events/Steel101 Hotel is The Westin Cincinnati, 21 East 5th St., Cincinnati, OH 45202 Hotel reservation phone number is 513-621-7700 (note, you may […]
U.S. Steel and ArcelorMittal USA are the latest steelmakers to announce a price increase. U.S. Steel informed customers today, June 26, that it has raised the base price for all new flat-rolled spot orders by $40 per ton ($2/cwt), effective immediately. Likewise, ArcelorMittal USA added $40 to the base price for its hot rolled, cold […]
There seem to be more questions than answers regarding the move by the domestic flat rolled steel mills to increase spot base pricing on hot rolled, cold rolled, galvanized and Galvalume steels. The move was taken as the low end of the benchmark hot rolled steel base pricing was dipping below $500 per ton. The […]
U.S. Steel and ArcelorMittal USA are the latest steelmakers to announce a price increase. U.S. Steel informed customers today, June 26, that it has raised the base price for all new flat-rolled spot orders by $40 per ton ($2/cwt), effective immediately. Likewise, ArcelorMittal USA added $40 to the base price for its hot rolled, cold […]
Hoping to put an end to declining flat rolled prices, a handful of steelmakers announced $40 per ton increases today, effective immediately on unconfirmed orders. The Nucor Sheet Mill Group was the first to announce that it is increasing base prices on new orders of hot rolled, cold rolled and galvanized steel by a minimum […]
As I expected, Nucor came out with a $40 per ton ($2.00/cwt) price increase on flat rolled this afternoon. This is the first Nucor price increase since Feb. 20, 2019. Shortly after the Nucor announcement, USS/POSCO followed with an increase letter of their own and then NLMK USA put out a letter identifying the minimum […]
NLMK Group has backed off from plans to invest in its U.S. division due to the steel duties that were imposed in 2018. The Department of Commerce has denied the Group’s request for exemption from the 25 percent Section 232 tariffs so that it can supply its facilities with steel slab. “Earlier we planned to […]
Steel Market Update is dedicated to assist the greater steel community to attract and maintain young people to the industry. The SMU NexGen Leadership Award, which is in partnership with the Steel Manufacturers Association, is but one step in the process that was begun many years ago. Our Steel 101: Introduction to Steel Making & […]
U.S. Steel’s first-quarter earnings call was dominated by the news of the steelmaker’s planned $1.2 billion investment at Mon Valley Works to build an endless casting and rolling facility at its Edgar Thomson Plant and a cogeneration facility at its Clairton Plant. CEO David Burritt called the project “transformative” for U.S. Steel, putting the company […]
Another exciting week in the steel industry… A couple of reminders: With four months yet to go we are marching toward 400 registered executives for the 2019 SMU Steel Summit Conference, which will be held in Atlanta on Aug. 26-28. This is THE premier networking event for the steel industry during the calendar year. Here […]
Management at NLMK USA is contemplating its next move after receiving the disappointing news Tuesday that the U.S. Commerce Department has denied its appeals for exclusions from the Section 232 tariffs on imported slabs. Commerce has determined that semifinished steels are available in sufficient quantities to support the domestic market, and that slab converters like […]
NLMK USA shipments increased 19 percent to 600,000 metric tons from the fourth quarter of 2018 to the first quarter of 2019. Higher shipments resulted in $530 million in revenue—a 4.0 percent increase despite steel prices slipping 12 percent quarter-over-quarter. NLMK USA hot rolled coil shipments totaled 330,000 metric tons and high value added products […]
The U.S. Department of Commerce released updated import license data on Tuesday evening, with new March license estimates up slightly to 2.76 million tons. These latest figures would be above the three-month moving average (3MMA, through final January data), but below the 12-month moving average (12MMA). When removing the semi-finished (mostly slabs) licenses from the […]
The U.S. Department of Commerce released license data for foreign steel coming into the United States. Based on the data received and reported through April 2, March imports are expected to come in slightly higher than February at 2.6-2.7 million net tons. When removing the semi-finished (mostly slabs) licenses from the data, the finished steel […]
This morning SMU was speaking with one of the e-commerce companies regarding their business and some of the challenges they see when dealing with companies buying and selling steel through their platform. One of the pitfalls recognized by the head of the e-commerce site was the lack of use of proper nomenclature for the products […]
Earlier this week Steel Market Update was speaking with one of the e-commerce companies regarding their business and some of the challenges they see when dealing with companies buying and selling steel through their platform. One of the pitfalls recognized by the head of the e-commerce site was the lack of use of proper nomenclature […]
Your college degree is not going to help you understand how the steel markets work. To do that you need to attend one of our Steel 101: Introduction to Steel Making & Market Fundamentals workshops. Our next workshop is being held in Davenport, Iowa on May 14-15, 2019. We choose our locations because our workshops […]
NLMK USA was not among the mills to learn earlier today that the Commerce Department had denied their requests for relief from the Section 232 tariffs on imported slabs. California Steel Industries and Evraz got the bad news. But NLMK USA President and CEO Robert Miller is still angry about it. “The administration, Commerce, BIS […]
The Bureau of Industry and Security today denied the exclusion exemptions for two mills: California Steel Industries and Evraz. At this point, we are expecting the NLMK USA and JSW USA exclusion requests to be denied as well. However, a trade attorney (not Lewis) suggested that we not move too fast with any proclamations. There […]
On Wednesday morning, Nucor announced a $40 per ton ($2.00/cwt) “minimum” price increase on flat rolled steel products. The mill advised their customers the increase was to be “effective immediately.” This is the second price increase announcement out of Nucor in less than 30 days. On Jan. 28, 2019, Nucor announced a $40 per ton […]
As the domestic steel mills started raising flat rolled prices on Wednesday, Steel Market Update reached out to a number of steel buyers in order to get their reaction to the news. We discussed the $40 per ton increases announced by Nucor, NLMK USA, U.S. Steel, California Steel and USS/POSCO along with ArcelorMittal USA’s new […]
The U.S. Department of Commerce released new license data through the 19th of February and the trend for imports is at 2.6 million net tons (+/- 200,000 tons). Semi-finished steels continue to be the largest single product imported, with most being slabs heading to mills like California Steel, NLMK USA, JSW USA and ArcelorMittal Mobile. […]
NLMK Pennsylvania says it is the “poster child for tariffs,” paying more than $160 million in duties for the steel slabs it utilizes at its operations. “I can’t imagine anybody paying more money in tariffs than we have,’’ said Bob Miller, NLMK Pennsylvania president in a recent comment to the Sharon Herald. NLMK Pennsylvania relies […]