As widely expected, Nucor and U.S. Steel raised their flat rolled prices by $40 per ton on Monday, effective immediately on new spot orders, following on a comparable announcement by ArcelorMittal USA on Friday. NLMK USA is reported to be following suit, but has not issued a written announcement. USS-POSCO Industries (UPI) raised its base […]
On Friday afternoon of this past week, ArcelorMittal USA began advising their flat rolled clients of their intention to raise sheet prices by $40 per ton. AMUSA customers were advised by phone and by email that base prices of hot rolled, cold rolled and coated products would increase effective immediately. At the same time, AMUSA […]
New rounds of flat rolled price increases began on Friday with ArcelorMittal USA and NLMK USA taking the lead at $40 per ton. My expectation is the other mills will follow on Monday and Tuesday of this week. Watch lead times – with some of the mills they are beginning to stretch. Steel Dynamics has […]
CNBC reported comments made by White House Economic Advisor Larry Kudlow on Tuesday saying, “The reality is those tariffs are still on the table.” This is in reference to the tweet from President Trump regarding steel from Brazil and Argentina. Steel buyers should be aware that there has not been a presidential proclamation, or anything […]
SMU Events is pleased to update the status of our popular Steel 101: Introduction to Steel Making & Market Fundamentals Workshops as well as more information on the 2020 SMU Steel Summit Conference. For those interested in attending one of our Steel 101 workshops. Our California workshop is now 90 percent full. We have approximately […]
President Trump stunned the market with an early-morning tweet Monday calling for new Section 232 tariffs on steel imports from Brazil and Argentina, which he accused of currency manipulation. No word yet on whether the White House will make the tariffs official, or even if they would be legal. But the prospect of higher priced […]
This morning President Trump tweeted that due to the decline in the Brazilian and Argentinian currencies, he intends to place 25 percent tariffs on steel and a 10 percent tariff on aluminum from both countries. His tweet has created a great deal of confusion in the U.S. steel markets. Steel Market Update is attempting to […]
This morning President Trump tweeted that due to currency manipulation by Brazil and Argentina, he intends to place 25 percent tariffs on steel from both countries, and a 10 percent tariff on aluminum. His tweet has created a great deal of confusion in the U.S. steel markets. Steel Market Update is attempting to help calm […]
Nucor’s Sheet Mill Group and Canada’s Algoma Steel have matched last week’s price increases by U.S. Steel and ArcelorMittal USA. Nucor informed customers on Monday that is has increased based prices on new orders of hot rolled, cold rolled and galvanized steel by a minimum of $30 per ton ($1.50/cwt). LIkewise, Algoma notified its flat […]
Allegheny Technologies Inc. and NLMK USA have signed a one-year agreement to extend and expand carbon steel hot rolling conversion services for NLMK at ATI’s Hot-Rolling and Processing Facility (HRPF) in Brackenridge, Pa., through December 2020. ATI expects 2020 volumes to increase significantly compared to 2019 levels and provide guaranteed volumes and fixed fee-per-ton revenues, […]
Next Steel 101: Introduction to Steel Making & Market Fundamentals Workshop: Jan. 8-9, 2020, in Ontario, Calif. Next Mill Tour: California Steel Industries, Fontana, Calif. This will be our 30th Steel 101 Workshop since inception. The Steel Market Update Steel 101: Introduction to Steel Making & Market Fundamentals Workshop has trained close to 1,000 people […]
Next Steel 101: Introduction to Steel Making & Market Fundamentals Workshop: Jan. 8-9, 2020, in Ontario, Calif. Next Mill Tour: California Steel Industries, Fontana, Calif. This will be our 30th Steel 101 Workshop since inception. The Steel Market Update Steel 101: Introduction to Steel Making & Market Fundamentals Workshop has trained close to 1,000 people […]
A memo from the Commerce Department Office of the Inspector General suggests that the Section 232 exclusion process may be favoring the companies that file objections to exclusion requests. The watchdog agency found evidence of unofficial communications that may be giving objectors undue influence in tariff decisions. The Bureau of Industry and Security is charged […]
Four more mills–Nucor, U.S. Steel, USS-Posco and Algoma Steel–raised prices on their flat rolled products by $40 per ton ($2/cwt) Friday, following on similar announcements by ArcelorMittal and NLMK USA the day before. The mills are hoping to reverse the slide that has taken the benchmark price of hot rolled steel from more than $700 […]
Nucor and U.S. Steel raised prices on their flat rolled products by $40 per ton ($2/cwt) today, following on similar announcements by ArcelorMittal and NLMK USA yesterday. The mills are hoping to reverse the slide that has taken the benchmark price of hot rolled steel from more than $700 per ton to less than $500 […]
Speculation that steel prices were near the bottom and the mills were contemplating a price increase has proven out as ArcelorMittal and NLMK USA both announced flat rolled price increases today of $40 per ton. Other mills are expected to follow. ArcelorMittal informed its commercial team today that it is raising base prices on light […]
ArcelorMittal USA announced a $40 per ton ($2.00/cwt) price increase today, which is in line with our expectations that an increase was inevitable based on comments from service centers and manufacturing companies responding to our flat rolled steel market trends questionnaires over the past few weeks. By the end of the day, NLMK USA had […]
NLMK USA noted weaker demand in the pipe manufacturing and construction segments in its third-quarter earnings report. Prices dropped 13 percent from the second quarter and shipments declined 6 percent to 550,000 metric tons, resulting in a loss for the company. Revenue for the segment fell 18 percent from the second quarter to $391 million. […]
Over the past couple of weeks, Steel Market Update has been suggesting flat rolled steel prices were at a bottom and the domestic steel mills would soon announce price increases. Today, ArcelorMittal USA began advising customers of their intention to raise prices by $40 per ton. By the end of the workday, NLMK USA had […]
Another hectic week for me as I travel to Chicago on Monday and Tuesday. I will be in the office on Wednesday, Thursday and part of the day on Friday before flying to London where I will be visiting CRU offices on Oct. 28, participating in the CRU Breakfast at the British Museum on the […]
NLMK USA’s sales fell 6.0 percent to 549,000 metric tons in the third quarter of 2019 compared to the second quarter, said NLMK Group in a trading update today. Declining volume was the result of decreased HRC sales due to lower demand from the tube and pipe sector. Shipments of hot-dipped galvanized (HDG) also decreased […]
The steel industry enjoyed a profitable first half of 2018 due to a strong economy and tariffs on imports that drove up domestic prices. The welcome windfall prompted several companies to commit large investments toward expansion and modernization of their facilities. In all, about 31 million net tons of new steel capacity could potentially come […]
ArcelorMittal announced that it will lay off 100 workers at its Weirton, W. Va., tin plate plant. The company joins its competitors, U.S. Steel and NLMK USA, in cutting back production in recent weeks. ArcelorMittal said in a statement: “In order to maintain its position as a competitive and sustainable tin plate producer, ArcelorMittal Weirton […]
I was pleased that we got 21 quality nominations for our first SMU NexGen Leadership Award, sponsored by the Steel Manufacturers Association. I mention each of the canidates in an article earlier in tonight’s newsletter. I hope we are able to double the canidates next year as we strive as an industry to bring new […]
Following the lead of most of the other flat rolled mills, NLMK USA informed customers Tuesday that it is raising spot prices on all products by a minimum of $40 per ton. Nucor, U.S. Steel and USS-POSCO Industries also announced $40 increases this week. ArcelorMittal USA released higher minimum base prices of $630 per ton […]
Following the lead of most of the other flat rolled mills, NLMK USA informed customers yesterday that it is raising spot prices on all products by a minimum of $40 per ton. Nucor, U.S. Steel and USS-POSCO Industries also announced $40 increases this week. ArcelorMittal USA released higher minimum base prices of $630 per ton […]
This week we solicited input from steel buyers (and steel mills) regarding their reaction to the third round of price increases, which was kicked off by ArcelorMittal USA yesterday. On June 24, Nucor announced the first of the latest round of mill price increases on spot flat rolled steel. Nucor advised that hot rolled, cold […]
This week we solicited input from steel buyers (and steel mills) regarding their reaction to the third round of price increases, which was kicked off by ArcelorMittal USA yesterday. On June 24, Nucor announced the first of the latest round of mill price increases on spot flat rolled steel. Nucor advised that hot rolled, cold […]
Imports of “finished” foreign steel are trending below 2 million net tons for the month of July. Overall, the trend, based on the first two weeks of license data for all products, is for a 3.2 million net ton month. SMU believes these numbers are overstated due to the opening of a new quarter and […]
NLMK USA’s second-quarter sales dropped 3 percent from the previous quarter to 580,000 metric tons due to lower shipments in anticipation of further deterioration of steel prices. Flat steel prices in the U.S. went down by 6-11 percent from first to second quarter and 23-30 percent on a year-over-year basis. Pricing was impacted by steel […]