On Wednesday, Nippon Steel announced additional investments it plans to make in U.S. Steel facilities as part of its pending purchase of the iconic American flat-rolled steelmaker. The two companies still anticipate the deal’s closing by the end of this year. With an investment of “no less than $1 billion,” Nippon said it would replace […]
Pennsylvania Governor Josh Shapiro has come out against Nippon Steel’s proposed buy of U.S. Steel because it doesn’t have union support, according to media reports.
Japan’s Nippon Steel announced it was withdrawing from a joint venture (JV) with China's Baoshan Iron & Steel (Baosteel) that served the Chinese automotive industry.
Nearly 1,200 people have registered for SMU Steel Summit, which is less than a month away now. That means we’re still on pace to meet or exceed last year’s record attendance despite a tough flat-rolled steel market over the last few months. So, a big thank you to everyone who already plans to go for your continued support. If you haven’t booked travel yet, don’t miss out on one of the greatest shows in steel – register here. (You can also check out the latest agenda here.)
Cleveland-Cliffs Chairman, President and CEO Lourenco Goncalves had some insightful things to say today about the steel market and about a conference we suspect might be Steel Summit.
Cleveland-Cliffs expects its acquisition of Canada’s Stelco to close later this year, which will help the the Cleveland-based steelmaker as a bottom to steel tags nears.
I thought we’d have more clarity this week on Section 232, Mexico, and a potential carve-out for steel melted and poured in Brazil. As of right now, the only official comment I have is from the Office of the United States Trade Representative (USTR).
There are just 40 days left until the 2024 SMU Steel Summit gets underway on Aug. 26 at the Georgia International Convention Center (GICC) in Atlanta. And I’m pleased to announce that it's official now: More than 1,000 people have registered to at attend! Another big development: The desktop version of the networking app for the event has officially launched!
Cleveland-Cliffs has been pursuing M&A opportunities for some time now and thinks it has found a solid partner with aligned interests in Stelco. The companies announced on Monday that Cliffs would acquire the integrated Canadian steelmaker. That same day, Cliffs held a conference call with analysts to discuss the acquisition. Lourenco Goncalves, Cliffs’ chairman, president, […]
There are a lot of rumors swirling around the steel market over the last couple of weeks. Chief among them was that we might see a price hike after Independence Day. Another concerns a key detail in the new Section 232 agreement with Mexico. Namely, steel imported from Brazil into Mexico. Of particular interest is its potential implication for slabs imported from Brazil, rolled in Mexico, and then exported to the US.
Two veteran investment bankers joined SMU's Community Chat on Wednesday, July 10, to talk consolidation and M&A in the metals industry.
Canada’s industry minister Francois-Philippe Champagne has conditionally allowed a Glencore-led consortium to acquire Teck’s Elk Valley Resources (EVR) metallurgical coal business for $6.9 billion. He also raised the bar for foreign companies wanting to buy into the country’s critical mineral resources.
U.S. Steel and Nippon Steel explained their position on USS’ participation in US trade cases should their proposed nearly $15-billion merger deal go through. The companies hope to close the deal by the end of the year.
A press conference at a Cleveland-Cliffs mill in Ohio touched upon several topics, including the unfair trade practices of Mexico and China and Nippon Steel’s proposed acquisition of U.S. Steel.
US sheet prices continue to fall, with SMU’s average hot-rolled (HR) coil price now at $670 per short ton (st). Prices for cold-rolled and coated products are now in the mid/high $900s/st. As I noted in my last Final thoughts, the consensus among our readers is that prices will bottom out in July. And that makes intuitive sense. Lead times in mid/late July should be stretching into the typically busier fall months. The question then is where prices bottom.
U.S. Steel has guided to lower second-quarter earnings both sequentially and on-year in "dynamic" spot price market.
Now that June has arrived, the official countdown until SMU’s Steel Summit 2024 – North America’s premier flat-rolled steel conference – has begun. If you haven’t already registered, don’t delay. More than 700 attendees from more than 300 companies have already registered to be in Atlanta this August. In short, it’s poised to be another […]
When it comes to steel decarbonization, we do not need to compromise our climate ambition to make the types of demanding steel products needed for our 21st-century economy. Nevertheless, many of the world’s highest-emitting steel producers and their allies would have you believe that one cannot be done without the other. They are wrong. They […]
ArcelorMittal plans to continue to invest and expand its operations in North America, a senior company executive said in an exclusive interview with SMU. “People were talking about our demise in North America or maybe our exit. And I want to emphasize that nothing could be further from the truth,” said Brad Davey, executive vice president and head of corporate development at the company.
When you step out of the airport in Phoenix in June, the heat tends to focus your mind. I was in town to attend the Steel Manufacturers Association/Metals Service Center Institute (MSCI) annual meeting in Scottsdale, Ariz. The desert locale with palm trees, swimming pools, and the obligatory high-powered air conditioning was fitting for 2024. Between the presidential election and the geopolitical situation, things have definitely been heating up.
We’re just a few months away from SMU’s Steel Summit 2024 – North America’s premier flat-rolled steel conference.
U.S. Steel and Nippon Steel Corp. (NSC) said they have received all regulatory approvals outside of the US for the proposed sale of USS to the Japanese steelmaker.
Cleveland-Cliffs is potentially eyeing a buy of NLMK USA’s Midwest assets, according to a report in Bloomberg.
U.S. Steel’s board of directors has published a letter accusing Cleveland-Cliffs of a campaign of “misinformation” intended to “derail the transaction” of Japan’s Nippon Steel Corp. (NSC) to buy the Pittsburgh-based steelmaker. However, Cliffs has clapped back, with a release rebutting USS’ allegations.
Cleveland-Cliffs’ Lourenco Goncalves thinks trade measures announced by the US government on Tuesday against China were just the opening salvo in a series of trade actions. Case in point: The Biden administration targeted China’s “unfair” trade policies with additional tariffs on an array of Chinese-made goods - including steel, aluminum, and EVs.
A vote on Friday by the International Trade Commission (ITC) ensures that antidumping duties on certain steel sheet imports from Japan will continue for the mid-term.
Three vocal Republican senators are demanding that President Joe Biden block the sale of U.S. Steel to Japan’s Nippon Steel.
Tariffs on unfairly traded steel and other products help to stabilize America’s most important industries, safeguard tens of thousands of jobs, and protect national security. My union, the United Steelworkers (USW), never seeks these remedies lightly. And presidents, Republican and Democrat alike, implement them only after diligent investigations documenting the harm that foreign adversaries intentionally inflict upon our country with dumping, overproduction and other kinds of trade cheating. I don’t think Lewis Leibowitz considered these points while criticizing tariffs in his excessively pro-free-trade column, “Where is the voice of the consumer?” on May 5.
The EU has approved Tokyo-based Nippon Steel Corp.’s (NSC’s) proposed buy of U.S. Steel, a report in Reuters on Monday said.
The sale of U.S. Steel Corp. to Nippon Steel Corp. has been delayed by the US Department of Justice’s antitrust investigation. The Justice Department, which is conducting an antitrust review of the merger, has requested additional information from both USS and NSC. The companies originally anticipated closing the sale in the second or third quarter […]