Service centers held essentially the same number of months of supply of flat rolled steel inventories at the end of April as they did as of the end of March 2018. SMU Service Center Months of Supply Index for flat rolled (sheet) steel is 2.7 months based on responses from 95 percent of the steel […]
March was a strong month for both steel mill shipments and demand for rolled steel products, but this was partly a seasonal effect. This conclusion is based on Steel Market Update’s analysis of data from the American Iron and Steel Institute (AISI) and the U.S. Department of Commerce. March was a good month for both […]
Steel Market Update’s analysis of import market share for sheet, plate, long and tubular products and their 18 subcategories shows big disparities by product type. Table 1 shows total supply to the market in three months through March and in 12 months through March for the four product groups and the 18 subcategories. Supply to […]
Steel mill shipments are increasing, and the shipment-to-inventory ratio is decreasing, which is positive for the industry. According to American Iron and Steel Institute data, total steel mill shipments increased by 13.1 percent from January 2016 through January 2018 and by 2.4 percent in January 2018 year over year. Is this believable? This is the […]
Key market indicators tracked by Steel Market Update are at an all-time high for April but have shown signs of weakening in the past few months. Data released in April shows that 18 of the 36 indicators are historically positive with only 5 negative. The balance is within the historically normal band. Trends took a […]
Indicators of manufacturing activity point to a strong first half for the U.S. economy and the steel industry. This report summarizes seven data sources that describe the state of manufacturing in the United States. We have reported on most of these separately in our Steel Market Update publications, and therefore will be brief in […]
Nucor Corp.’s first quarter 2018 consolidated net sales increased 9 percent from the previous quarter to $5.57 billion. Total tons shipped jumped 6 percent to 6.967 million tons. Consolidated net earnings were $354.2 million. Earnings in the steel segment improved in the first quarter due to higher steel prices and an 8 percent increase in […]
U.S. steel mills shipped 7,525,590 net tons in February, a 1.5 percent decrease from the previous month. The total was a 4.1 percent increase from the 7,232,341 net tons shipped in February 2017, however, reports the American Iron and Steel Institute in Washington. Steel shipments year-to-date in 2018 total 15,161,931 net tons, a 1.5 percent […]
U.S. demand for steel sheet products expanded slowly through February, according to Steel Market Update’s analysis of data from the American Iron and Steel Institute (AISI) and the U.S. Department of Commerce. Apparent supply is a proxy for market demand. Demand momentum for sheet products in total was negative in the three months through February, […]
Steel Market Update’s new analysis of sheet, plate, long and tubular product imports and their 18 subcategories is still a work in progress, but it offers a timely means to examine the effects of the Section 232 legislation on the market. Table 1 shows total supply to the market in three months through February and […]
Economic indicators of manufacturing activity in the United States remain strong and portend well for the first half of 2018. This report summarizes seven data sources that describe the state of manufacturing in the U.S. We have reported on most of these separately in our Steel Market Update publications, and therefore will be brief […]
Imports’ shares of the major steel product markets are all on the decline, reveals a new report on imports from Steel Market Update. The report examines the import share of sheet, plate, long and tubular products and 18 subcategories of these product groups. We think the introduction of this analysis is timely as a way […]
Economic indicators of manufacturing activity remain strong and continue pointing to good demand for steel at least through mid-year. This report summarizes seven data sources that describe the state of manufacturing in the United States. We have reported on most of these separately in our Steel Market Update publications, and therefore will be brief […]
In 2017, the domestic steel market contracted by 0.5 percent, but domestic shipments were up while imports were down. Table 1 shows 11 years of history of total steel supply to the U.S. market broken down into shipments from domestic mills and imports, excluding semi-finished. The hot rolled steel market totaled 106.4 million tons in […]
Economic indicators are strong overall and portend well for the first half of 2018. This report summarizes seven data sources that describe the state of manufacturing, construction, steel activity and the overall market in the United States. We have reported on most of these separately in our Steel Market Update publications, and therefore will […]
In its year-end 2017 financial report, Nucor delivered its highest annual earnings since 2008. Consolidated net sales increased 25 percent to $20.25 billion, compared with $16.21 billion for fiscal 2016. Shipments to outside customers during 2017 totaled 26,492,000 tons, an increase of 9 percent from fiscal 2016. Average sales price per ton increased 15 percent. […]
U.S. demand for steel sheet products continued to expand through November, according to Steel Market Update’s analysis of data from the American Iron and Steel Institute (AISI) and the U.S. Department of Commerce. Apparent supply is a proxy for market demand. Demand momentum for sheet products in total was negative in the three months through […]
Imports of rolled steel into the United States have been on the decline since peaking in July, based on a three-month moving average of government import data through the end of 2017. In three months through December compared to three months through September, total rolled steel imports declined by 16.8 percent, while sheet products dropped […]
Key market indicators bode well for business conditions in the first quarter of 2018. Steel Market Update’s view of the present situation based on our examination of data released in December shows that 47.2 percent of the 36 indicators are historically positive with only 19 percent negative. The balance is within the historically normal band. […]
Demand for sheet products improved in the three months through October by 3.2 percent year over year, led by hot rolled and other metallic coated. Demand for Galvalume is surging at the expense of galvanized sheet, according to Steel Market Update’s latest analysis of American Iron and Steel Institute (AISI) and U.S. Department of Commerce […]
Rolled steel imports into the United States declined by 12.7 percent in the three-month period from September-November, compared with the prior three months, June-August. Sheet products declined by 11.4 percent on the same basis, according to weekly licensed import tonnages reported by of the U.S. Department of Commerce on Dec. 5. The data is reported […]
Economic indicators of manufacturing activity are still healthy overall and suggest conditions should remain positive for the balance of this year and into the first quarter of 2018. This report summarizes seven data sources that describe the state of manufacturing in the U.S. We have reported on most of these separately in our Steel Market […]
U.S. demand for steel sheet products continued to expand through September, according to Steel Market Update’s analysis of data from the American Iron and Steel Institute (AISI) and the U.S. Department of Commerce. Apparent supply is a proxy for market demand. Demand momentum for sheet products in total was negative in the three months through […]
Total rolled steel imports declined by 14.0 percent in the three months through October, compared to the three months through July. Sheet products were down by 12.6 percent on the same basis, based on final license data for October reported by of the U.S. Commerce Department on Nov. 7. The data is reported within the […]
Economic indicators of manufacturing activity are still healthy overall and portend well for the balance of this year. This report summarizes seven data sources that describe the state of manufacturing in the U.S. We have reported on most of these separately in our Steel Market Update publications, and therefore will be brief in this summary. […]
Demand for steel sheet products continued to expand through August. This report summarizes total steel supply by product from 2003 through August 2017 and year-on-year changes. It then compares domestic mill shipments with total supply to the market. It quantifies market direction by product and enables a side-by-side comparison of the degree to which imports […]
Total rolled steel imports declined by 5.8 percent in the three months through September, compared with the three months through June. Sheet product imports were down by 3.9 percent on the same basis. The final license data for September was reported by of the U.S. Commerce Department on Oct. 3. The data is reported within […]
Economic indicators of manufacturing activity are still healthy overall and portend well for the balance of this year. This report summarizes seven data sources that describe the state of manufacturing in the U.S. We have reported on most of these separately in our Steel Market Update publications, therefore will be brief in this summary. We […]
Imports continued to increase their share of the steel sheet market in July. Apparent supply is a proxy for market demand. For all sheet products except other metallic coated, demand had positive momentum in three months through July. This report summarizes total steel supply from 2003 through July 2017 and year-on-year changes. It then compares […]
Total rolled steel imports increased by 10.8 percent in the three months through August compared to the three months through May. Sheet product imports rose by 14.3 percent on the same basis, according to final license data for August reported by the U.S. Commerce Department on Aug. 6. The data is reported within the Steel […]