Distributors who sell galvanized steel products to the construction and HVAC sectors still feel very positive about their prospects heading into next year despite weakening prices and rising inventories. Declines in galvanized prices out of the domestic mills have been fairly minor so far and demand remains strong, reported members of the Heating, Air-Conditioning & […]
Monthly Key Market Indicators, as analyzed by Steel Market Update, edged down over the past month as positive indicators have decreased successively since June. A typical summer slowdown started the momentum shift, however, a surge in COVID variant cases, compounded by a slow-moving job market and supply-chain bottlenecks have continued to push the market indicators […]
By Trade Attorney Lewis Leibowitz Last Wednesday, it was my pleasure to join many readers on the latest Steel Market Update Community Chat. After a brief rundown of current issues affecting the steel sector and its customers, we had a lively round of questions, refereed by SMU Senior Editor Michael Cowden. We didn’t get to […]
By CRU Principal Analyst Josh Spoores, from CRU’s Steel Sheet Products Monitor, Nov. 10 Global sheet prices have continued to fall, though declines have not been consistent across all regions. Overall, CRU’s Global Flat Products Steel Price Indicator (CRUspi flats) fell for the second consecutive month, declining by 2.9% and is now at its lowest […]
Producer prices rose at a slightly higher rate in October, according to data released by the Labor Department. Supply-chain bottlenecks and shortages continue to drive manufacturing and shipping costs, keeping the historic climb for the index and subcategories for final demand moving up. Since falling in early 2020, the composite Producer Price Index (PPI) of […]
October saw a major improvement for the U.S. labor market and a sign of optimism as the latest coronavirus surge eases. The latest data from the U.S. Bureau of Labor Statistics showed that the economy created a noteworthy 531,000 new jobs in October following disappointing monthly results in August and September. October’s results included nearly 100,000 […]
U.S. job creation roared back in October as payrolls rose by 531,000, a welcome contrast to the weak outcome the month prior. The mark was unexpected, as total jobs exceeded most estimates by nearly 100,000 and the unemployment rate fell to 4.6%, the Labor Department reported. Private payrolls were even stronger, rising 604,000 as a loss […]
The management team at Ryerson reported solid third-quarter results on Thursday and expressed optimism about underlying demand in the fourth quarter and into next year. “The pricing environment is still healthy and strong underpinned by good demand – demand deferred, not denied – and we see that continuing into 2022,” Ryerson President and CEO Eddie […]
Steel tube producer Tenaris saw global sales jump 15% sequentially to $1.75 billion in the third quarter of 2021, with sales 73% above the same year-ago quarter. The successive increase in Q3 was driven by an 8% increase in volumes, aided by a 6% increase in selling prices. Sales surged by 28% in North America to […]
Japan wants a waiver from the current Section 232 regime following the U.S. negotiating a tariff-rate quota (TRQ) with the European Union. The issue came up during a virtual meeting between U.S. Trade Representative Katherine Tai and Koichi Hagiuda, head of Japan’s Ministry of Economy, Trade and Industry, on Thursday, Nov. 4. Minister Hagiuda “strongly […]
By CRU Principal Analyst Josh Spoores Trade representatives from the USA and Europe came to an agreement at the end of October in regard to the Section 232 tariffs on steel and aluminum. The Department of Commerce further announced on Oct. 31 that consultations regarding the trade of steel remain ongoing between the USA and […]
The U.S. manufacturing sector continued to expand in October, though output growth was hampered by ongoing material shortages, according to the latest U.S. Manufacturing PMI data from IHS Markit. The report noted that overall output growth eased yet again, slowing to its weakest reading since July 2020 amid capacity constraints including material shortages. A lack […]
Ternium reported net earnings of $1.37 billion in the third quarter of 2021, up from $1.16 billion in the the prior quarter and following a loss of $21 million in the third quarter of 2020. The gains resulted from higher steel prices and strong global demand. Shipments were 3.1 million tons in the third quarter, largely unchanged […]
October saw a gradual decline in steel prices for the second consecutive month, following one full year of continuous price increases. Hot rolled steel prices decreased $45 per ton throughout the month, with the SMU index averaging $1,885 per ton ($94.25 per cwt) as of Tuesday, Oct. 26. The SMU Price Momentum Indicator for hot […]
By CRU Senior Analyst Ryan McKinley from CRU’s Steel Sheet Products Monitor Falling demand in most markets around the world has continued to weigh on steel sheet prices. Meanwhile, the announcement that the USA will remove Section 232 tariffs on steel and aluminum producers in the EU and replace them with a quota system means […]
New orders, production and employment grew in October, while supplier deliveries slowed at faster rate and backlogs lengthened further, said the Institute for Supply Management in its latest Manufacturing ISM Report on Business. The Manufacturing PMI fell for the third straight month in October, down 0.3 percentage points to 60.8% in October, but still indicating […]
Total construction spending declined in September for the first time since February, as both residential and nonresidential construction slipped, according to a new analysis of federal construction spending data by the Associated General Contractors of America. AGC continues to lobby for the House to complete work on the bipartisan infrastructure bill that the Senate passed […]
It goes without saying, the steel industry is in a dynamic, volatile market and the only thing that is certain is the volatility will continue as we move into calendar year 2022. It is not just price we need to watch over the coming months. There are many moving pieces to this puzzle. The agreement […]
It goes without saying, the steel industry is in a dynamic, volatile market and the only thing that is certain is the volatility will continue as we move into calendar year 2022. It is not just price we need to watch over the coming months. There are many moving pieces to this puzzle. The agreement […]
“Business is great! Why is Steel Market Update always spreading so much gloom and doom about falling steel prices?” That’s not an actual quote, but we hear comments to that effect nearly every week. As if folks believe it will be a self-fulfilling prophecy. Of course, if prices decline, it won’t be because of some […]
This year’s third quarter was the best quarter on record for Reliance Steel & Aluminum Co., the nation’s largest service center organization. Reliance reported gross profit of $1.21 billion on sales of $3.85 billion in Q3. “Our resilient business model, favorable metal pricing trends and excellent execution combined to produce another quarter of record-setting financial […]
Allegheny Technologies Inc. (ATI) reported profitability for the first time since Q1 2020, three months ahead of schedule, company executives said on Thursday’s earnings call. The third-quarter net income of $48.7 million – up 35% against second-quarter results – was fueled by an improving aerospace market and a post-strike accelerated recovery. ATI said that production […]
I thought I’d be writing today that Steel Market Update had switched all its steel pricing momentum indicators to lower. But what you think should happen and what reality serves up are sometimes very different things. Hot-rolled coil prices continued to fall – they’re down $25 per ton compared to last week. That’s not a surprise. […]
Distributors who sell galvanized steel products to the construction and HVAC sectors report a slight softening in demand at the same time that competition is firming up and prices are looking down. Market conditions overall are still favorable, reported members of the Heating, Air-Conditioning & Refrigeration Distributors International during HARDI’s monthly conference call today, but […]
Cleveland-Cliffs Inc.’s earnings skyrocketed higher in the third quarter, and the steelmaker predicted that higher priced contract deals would protect it from any slip in spot prices in future quarters. The Cleveland-based steelmaker recorded net income of $1.28 billion in the third quarter of 2021, up from a mere $2 million in the same quarter […]
The U.S. economy expanded at a modest to moderate rate from late August to early October, said the Federal Reserve in its latest Beige Book report. Overall growth was curbed, though, due to supply chain disruptions, labor shortages and uncertainty around the surging Delta variant. Consumers spent more dollars in travel and tourism activity once again, […]
Steel Dynamics’ President and CEO Mark Millett expects “transformational change” from SDI’s new electric arc furnace mill nearing completion in Sinton, Texas. “We are not simply adding flat rolled steel production capacity. We have a differentiated product offering, a unique regional supply chain solution, a significant geographic lead time advantage and offer a sustainable alternative […]
Manufacturing growth in the state of New York grew at a noticeably lower rate in October compared to September, according to the Empire State Manufacturing Survey. The headline general business conditions index fell nearly 15 points to 19.8 during the month. After climbing by 16 points in September, the headline index nearly lost all the […]
General Motors Co. will extend production downtime at its Orion Assembly through the end of the month, a company spokesperson confirmed to Steel Market Update. The automaker’s Lake Orion, Mich., assembly plant, down since Aug. 23 due to the semiconductor scarcity, will extend its downtime to include the weeks of Oct. 18 and Oct. 25. […]
Monthly Key Market Indicators, as analysed by Steel Market Update, softened again in the past month. A typical summer slowdown followed by a surge in COVID variant cases, compounded by a lackluster job market, reflects an uneasy economic landscape. Consumer confidence has dwindled, highlighted by decreases in key indicators across the marketplace. SMU’s Key Market Indicators […]