The US labor market added 261,000 jobs in October, down from an upwardly revised total of 315,000 payroll gains the month prior. Last month’s total, though better than expected, still marked the slowest pace of job gains since December 2020, according to data from the Bureau of Labor Statistics (BLS). The decline in payroll gains […]
Data on US industrial production, capacity utilization, orders and inventories remained strong through September, indicating a healthy manufacturing sector. The health of the manufacturing economy has a direct bearing on the health of the steel industry. The Industrial Production (IP) Index The IP index is a gauge of output from factories, mines and utilities. Figure […]
The US economy added 261,000 new jobs in October, outperforming consensus expectations but still decelerating to the slowest pace since December 2020, according to data from the US Department of Labor. In contrast, the unemployment rate moved higher last month to 3.7%, after estimates expected the October measure to remain sideways and match the five-decade […]
This past week the Biden administration released a list of questions for the public on the four-year review of the Section 301 tariffs on China. The questions and the procedures in the review reveal quite a bit about where this investigation is going, and what policy choices will be coming out after the 2022 midterm […]
With the recent trade case decision resulting in antidumping duties placed on both seamless and welded oil country tubular goods (OCTG) imports, Tenaris plans to ramp up its OCTG production in the US as demand and pricing remain strong, according to company executives speaking on a third-quarter earnings conference call with analysts on Friday, Nov. 4. […]
GrafTech International Ltd. posted sharply lower earnings results for the third quarter as steel demand, and thus demand for graphite electrodes waned, while production at its Monterrey, Mexico facility remains suspended. “Ongoing geopolitical tensions and global economic uncertainty have softened near-term demand for steel and, therefore, graphite electrodes. This, combined with the current inflationary environment […]
Spending on nonresidential construction now outpaces residential construction projects, the Associated General Contractors of America (AGC) reported. Construction spending hit $1.811 trillion at a seasonally adjusted annual rate in September, a 0.2% increase versus August and up nearly 11% year-on-year (YoY). “Demand remains strong for a range of nonresidential construction segments despite supply chain challenges […]
Editor’s note: SMU Contributor Michael D’Angelo is a researcher and trader at Marex. In his role, Mike performs fundamental and quantitative analysis, which directly leads to actionable trading/risk management strategies across the base, precious, and ferrous metals derivative spaces. Prior to joining Marex, Mike received a BA in economics with a minor in finance from Princeton […]
Editor’s note: SMU Contributor Michael D’Angelo is a researcher and trader at Marex. In his role, Mike performs fundamental and quantitative analysis, which directly leads to actionable trading/risk management strategies across the base, precious, and ferrous metals derivative spaces. Prior to joining Marex, Mike received a BA in economics with a minor in finance from Princeton […]
Latin American steelmaker Ternium saw a big earnings drop in the third quarter but remains upbeat on its position in and the fundamentals of the North American markets, according to the company’s Q3 earnings report and conference call with analysts on Thursday, Oct. 3. The Luxembourg-based company’s Q3 net income declined substantially, falling 84% year-on-year […]
It’s official. Steel Dynamics Inc. (SDI) will build its $1.9 billion flat-rolled aluminum mill in Columbus, Miss., where the company already operates an electric-arc furnace (EAF) steel sheet mill. The Fort Wayne, Ind.-based steelmaker said it would also construct a “biocarbon” facility in Columbus to reduce reliance on anthracite coal in its EAFs and to […]
The US Department of Commerce’s International Trade Administration (ITA) has set new, lower dumping rates on hot-rolled steel flat product imports from Japan and South Korea. The time period covered in both the ITA’s administrative reviews of the antidumping duties is Oct. 1, 2020, through Sept. 30, 2021, according to the Federal Register filings reviewed by […]
Apparent demand for flat-rolled steel in the US edged down slightly in SMU’s latest analysis of demand and lead time dynamics. Despite the slight decline in the latter half of October, the month’s SMU Steel Demand Index closed out roughly 2.5 points above September’s reading but remained in contracting territory for the sixth straight month […]
SMU polled steel buyers on a variety of subjects on Monday and Tuesday of this week, including current and future steel prices, inventory strategies, supply, demand, and new mill capacity. Rather than summarizing the comments we received, we are sharing them in each buyer’s own words. We want to hear your thoughts, too! Contact Brett@SteelMarketUpdate.com […]
SMU polled steel buyers on a variety of subjects on Monday and Tuesday of this week, including current and future steel prices, inventory strategies, supply, demand, and new mill capacity. Rather than summarizing the comments we received, we are sharing them in each buyer’s own words. We want to hear your thoughts, too! Contact Brett@SteelMarketUpdate.com […]
US manufacturing activity grew at its slowest pace since May 2020, nearly falling in October to the neutral 50.0 mark — the level that typically divides expansion from contraction, according to the Institute for Supply Management (ISM). The latest update was slightly ahead of consensus forecasts of a neutral reading amid rising borrowing costs and […]
New orders for US-manufactured durable goods rose in September to a seasonally adjusted $274.7 billion — having risen now for six out of the last seven months. Orders picked up less than expected but still reversed the weaker showings of previous months. Last month’s bookings for durable goods were up roughly 0.04% or $1 billion more […]
The reshoring of US manufacturing, nonresidential construction, and semiconductor manufacturing are key areas where Reliance Steel & Aluminum Co. remains incredibly bullish. Speaking on the company’s third quarter earnings conference call with analysts on Thurs., Oct. 27, executives expressed their optimism for these markets. Reshoring/nearshoring is “legit,” and the company is “pumped up about it,” […]
I want to give a shoutout to the North American Steel Alliance (NASA) for giving me the opportunity to provide a keynote address at their Forecast Conference in Chicago earlier this week. And I want to take a minute to dive deeper into SMU’s lead time figures, one of the indicators I highlighted at the event as […]
Somewhat better-than-expected demand helped service center behemoth Reliance Steel & Aluminum Co. achieve strong third-quarter sales. And despite macroeconomic uncertainty, inflation, continuing supply chain disruptions, and geopolitical issues, the Scottsdale, Ariz.-based company anticipates healthy demand trends to continue in the current quarter, according to its Q3 earnings report released on Thursday, Oct. 27. The company […]
There’s something special about tales of yesteryear. Stories of a bygone era — before cell phones, virtual reality, and self-driving cars — can create a longing for nostalgia. For the Quality Metal Stamping (QMS) family, those tales of old are engrained in the company’s history. Steel Market Update sat down with Stephen Serling, a member of […]
Don’t look now but sheet price erosion continues, with tags across all flat-rolled products inching lower this week, according to SMU’s latest check of the market. For some time now we’ve been trying to gauge SMU survey respondents’ sentiment and their sense of market direction by asking when they think HRC prices will bottom out […]
Galvanized prices continue to drop, as discussed during this month’s call of the Sheet Metal/Air Handling Council of the Heating, Air-conditioning & Refrigeration Distributors International (HARDI). Prices have been steadily dropping for the past six months despite stable demand. A few highlights from the call include the differential between hot-rollled and cold-rolled coil being in […]
Cleveland-Cliffs Inc. expects a continuation of the trend it saw in the third quarter of increasing shipments to the automotive sector. This should support steel pricing going forward, the steelmaker said in its Q3 earnings report released on Tuesday, Oct. 25. “Shipments to our automotive clients significantly improved in Q3, achieving a level among the highest in […]
Schnitzer Steel Industries Inc. said its fourth quarter ended Aug. 31 results were negatively impacted by declining ferrous and nonferrous sales prices and demand. The trend partially offsets the benefits of strong prices for its finished steel products. Tighter supply flows and an extended outage at its Everett, Mass., recycling facility were partly to blame […]
The Biden administration is pushing its Federal Buy Clean Initiative to reduce carbon emissions from American industry and to support the purchase of low-carbon, made-in-America construction materials. The administration last week lauded two domestic steelmakers for their commitments to lower emissions and for participating in the initiative. Cleveland-Cliffs is the first domestic steel producer to […]
Nearly two-thirds of US states added construction jobs month-on-month (MoM) in September. Most also boosted construction employment during the past twelve months, according to Associated General Contractors of America (AGC) figures. AGC said the job gains were welcome news even if significant labor shortages probably prevented an even bigger upswing in employment. “While it is encouraging […]
What a difference a week can make. The lack of clarity in the short-to-medium-term direction presently in steel seems to be stumping maybe even the best and the brightest of flat-rolled buyers. And perhaps as Michael Cowden indicated in SMU’s prior Final Thoughts, the steel market might be somewhere in the middle — in-between bearish […]
A new railcar manufacturing facility will soon be built in Washington County, Md. Hitachi Rail announced plans for a $70 million factory to build all types of trains to meet growing demand in North America’s rail market. Construction of the facility’s building will use 1,050 tons of steel including joists, girders, and structural steel columns. […]
Investing further in its US operations, agricultural and heavy equipment manufacturer Deere & Co. is reshoring production of a certain cotton harvester model back from China. The steel end user is expanding its operations in Thibodaux, La., with a $29.8 million investment, according to a news release from Louisiana Governor John Bel Edwards. A new […]