Steel buyers and sellers report that most mills are still open to price discussions, even after recent price increase announcements, based on responses from Steel Market Update’s latest flat rolled market trends questionnaire. Over the course of the past week, SMU canvassed active participants in the manufacturing and service center segments of the flat rolled […]
Flat rolled lead times, the amount of time it takes for the steel mills to produce an order if placed today, have shortened ever so slightly in the past month, according to data collected by Steel Market Update (SMU) from manufacturers and steel service centers earlier this week. Viewed over a longer time frame, lead […]
Editor’s note: Following is a response from Zekelman Industries CEO Barry Zekelman to remarks by Daniel Pearson of the Cato Institute published in Steel Market Update’s Sept. 5 newsletter. Zekelman comments on his position on imports and the current state of steel-related trade into the U.S. During our exchange at the recent SMU Steel Summit […]
Millennials are the steel industry’s future and are anxious to solve problems and get results. Attendees who remained for the final presentation at the SMU Steel Summit heard an eye-opening discussion on just what the millennial generation is seeking and how the steel industry can recruit and retain talent from this important demographic. Three young […]
The following article on the hot rolled coil (HRC) futures markets was written by David Feldstein. As the Flack Global Metals Director of Risk Management, Dave is an active participant in the hot rolled futures market, and we believe he provides insightful commentary and trading ideas to our readers. Besides writing futures articles for Steel […]
Global manufacturing rose to a 75-month high in August. The J.P. Morgan Global Manufacturing PMI climbed to 53.1 from 52.7 in July. Most components of the PMI increased in August and at a faster rate. Future output was the only measure to remain the same as July, at a strong 63.5. Developed nations on average led […]
Solar manufacturers are hoping for a positive determination in a Section 201 trade case that claims U.S. manufacturers are harmed by global overcapacity and the import of cheap solar modules from China. They are now getting support from the steel industry in the form of a letter to the U.S. International Trade Commission from the […]
Steel Market Update asked four panelists at the 2018 Steel Summit to define free and fair trade and offer some solutions to what most in the industry consider unfairly traded steel imports. Philip Bell, president of the Steel Manufacturers Association representing North American EAF steel producers, said there are five components of free and fair […]
The manufacturing panel during the SMU Steel Summit Conference last week in Atlanta featured a lively exchange between Barry Zekelman (CEO, Zekelman Industries) and Dan Pearson (Cato Institute). Mr. Zekelman’s comments appeared in the Aug. 31, 2017, issue of Steel Market Update. Mr. Pearson, the former chairman of the International Trade Commission, read our article […]
The growth of total construction spending is slowing, though still positive year over year. July data for construction put in place (CPIP) was released by the Department of Commerce on Friday. Total construction still shows positive growth, but slowed to 0.9 percent year over year in the latest three months of data. Privately funded projects […]
Employment growth in both construction and manufacturing was strong in August. The Bureau of Labor Statistics (BLS) net job creation report released on Friday was disappointing in total, but unusual in the detail. Disappointing because employment growth was worse than normal for August. Unusual in that the ratio of goods-producing to service-industry job growth was […]
Round two of NAFTA negotiations wound up today, with no resolution in sight. Among the many issues being debated, the topic of rules-of-origin is proving to be contentious for Canadian and Mexican negotiators, as well as auto producers. U.S. negotiators are proposing that U.S. content in NAFTA-eligible vehicles be raised to between 35-50 percent, according […]
Economic activity in the manufacturing sector expanded again in August as the Institute for Supply Management’s PMI registered 58.8 percent, an increase of 2.5 percentage points from July. This indicates growth in manufacturing for the 12th consecutive month and is the highest reading since April 2011, reports ISM. Any reading above 50 percent indicates expansion. […]
Half of the 36 Key Steel Market Indicators released in August are historically positive, while only 19 percent are negative, and the balance fall within the normal range, in Steel Market Update’s view. Along with May, when the data was about the same, this is the best outlook since we began our analysis in January […]
Over the past three days, Steel Market Update (SMU) had all hands on deck for our 7th SMU Steel Summit Conference. The conference was once again held at the Georgia International Convention Center next to the Atlanta International Airport. We had record attendance with 661 executives registered compared to 434 last year. There were 309 […]
Over the past three days, Steel Market Update (SMU) had all hands on deck for our 7th SMU Steel Summit Conference. The conference was once again held at the Georgia International Convention Center next to the Atlanta International Airport. We had record attendance with 661 steel and manufacturing executives registered compared to 434 last year. […]
Consumer confidence increased again in August, according to The Conference Board. The composite value of consumer confidence in August was 122.9, up from 120.0 in July. The first estimate for July was revised down slightly. The last seven months have each been better than at any time since 2001. The three month moving average (3MMA) […]
A subsidiary of Canadian steel processor and Nova Steel is looking for a location in the United States to build a pipe and tube manufacturing plant. Cleveland, Ohio, hopes to entice Nova Tube and Steel LLC with a prime spot along Interstate 77 near ArcelorMittal and access to the Cuyahoga River and the Great Lakes. […]
Good evening from Atlanta, site of our 7th SMU Steel Summit Conference. We announced this morning that attendance for this conference is a new record. We are pleased to announce we registered 661 manufacturing, steel and industry executives for this year’s conference, breaking last year’s 434 record. Our “Pre-Summit” Conference program on Monday attracted approximately […]
U.S. manufacturing continued to perform well through July. This Premium content, which is being offered to all subscribers, summarizes seven data sources that describe the state of manufacturing in the U.S. We have reported on most of these separately in our Steel Market Update publications, therefore will be brief in this summary. We don’t expect […]
Durable goods orders fell 6.8 percent in July, their largest margin since August 2014, as orders for volatile aircraft orders plummeted. Orders for civilian aircraft plunged 70.7 percent after a 129.3 percent surge in June. Transportation equipment orders in total dropped 19.0 percent. The drop in July was expected by economists after the strong gains […]
Tomorrow, Monday, Aug. 28, the steel event of the year will kick off in Atlanta. With over 650 steel and manufacturing executives registered, expectations are for this conference to truly be the most dynamic steel conference in North America for 2017. Welcome to the Steel Market Update Steel Summit Conference. This is what the fuss […]
ArcelorMittal’s three plate facilities in the United States—Burns Harbor in Burns Harbor, Ind., and Coatesville and Conshohocken in Pennsylvania—have each achieved DNV-GL certification, which will allow the company to expand business opportunities domestically and internationally for its plate products. DNV-GL (Germanischer Lloyd) is a classification society that sets rules and standards for industries, especially maritime-related […]
Many Americans see the North American Free Trade Agreement (NAFTA) as a contributing factor to the growth of the U.S. economy over the past 20 years and believe the focus of the NAFTA negotiations should be on modernizing the agreement, not withdrawing from it, according to a survey of 2,000 U.S. adults commissioned by Livingston […]
Two Federal Reserve manufacturing indexes were released this week with both regions showing strong activity in August. Richmond manufacturing remained relatively steady in August, while Kansas activity rebounded from a weaker July. Fifth District (Federal Reserve Bank of Richmond) The composite manufacturing index in the Fifth District was unchanged in August at a solid reading […]
Manufacturers in the precision metalforming sector are not expecting much change in business conditions during the next three months, although orders are expected to trend slightly downward, according to the August 2017 Precision Metalforming Association (PMA) Business Conditions Report. Current average daily shipping levels dropped significantly in August with 28 percent reporting levels above those […]
In Steel Market Update’s (SMU) latest flat rolled steel market analysis, manufacturing companies and steel service centers are sending mixed messages regarding how flat rolled steel distributors are treating their spot end customers. Twenty-one percent of the manufacturing companies responding to last week’s flat rolled steel market trends questionnaire reported service centers were lowering prices, […]
How can domestic mills expect to increase prices when their lead times are so short and foreign steel is still so plentiful? In the monthly steel conference call hosted today by the Heating, Air-conditioning, and Refrigeration Distributors International, HARDI members commented on the contradictions in mill behavior that have left them confused and concerned about […]
The United States and Canadian leaders of the United Steelworkers released a joint statement on Wednesday advocating NAFTA rules-of-origin, strong labor and environmental rights. United Steelworkers International President Leo W. Gerard and Canadian National Director Ken Neumann urge strengthening regional rules-of-origin for autos, auto parts and manufactured products, including requirements for melting and pouring steel […]
BlueScope Steel, the parent of North Star BlueScope, will have a change in command. Mark Vassella has been appointed the new managing director and chief executive officer following retirement by outgoing CEO Paul O’Malley effective Dec. 31, 2017. O’Malley has been at the helm of BlueScope Steel the past 10 years of his 12-year tenure. […]